Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

Radiation-induced emission from golden hamster embryo cells

Emission from high-energy-electron-irradiated golden hamster embryo (GHE) cells has been studied over the temperature range 12–300 K both by a one-shot-single-photon-counting method and by photocurrent measurements with an oscilloscope. Emission from the irradiated phosphate buffered saline (PBS) also has been studied. The emission spectra from PBS at 12 and 77 K show a maximum around 330 and 380 nm, respectively, which are the same spectra as those from irradiated pure H₂O. The emission from irradiated GHE consists of the new band at 480 nm in addition to the emission from H₂O. The 480 nm emission is observed at the temperature range of 12–300 K, though the emission at 300 K is much lower than that at low temperature. The 480 nm emission is ascribed to the transition from excited organic substances in GHE cells. The intensity of 480 nm emission at 300 K increases linearly with increasing irradiation-dose in the range of 11–600 Gy.     

Polymerization of tetraallyl ammonium chloride

The radical polymerization of tetraallyl ammonium chloride (TAAC) was carried out in water using azo-initiator as compared to that of diallyl dimethyl ammonium chloride (DADMAC); the rate of polymerization was quite low for TAAC, around one-third of DADMAC. Kinetic discussion revealed the importance of degradative chain transfer in the polymerization of TAAC. The cyclopolymerizability of TAAC was estimated kinetically as the ability of 5-membered monocyclic radical to form a bicyclic ring, giving the cyclization constant of 21 mol/L at [M] = 2 mol/L. Gelation occurred at around 20% conversion.     

Ruthenium-catalyzed formation of aryl(diphenyl)phosphine oxides by reactions of propargylic alcohols with diphenylphosphine oxide

1,1-Diaryl-1-penten-4-yn-3-ols react with diphenylphosphine oxide in the presence of a thiolate-bridged diruthenium complex as a catalyst and give high yields of aryl(diphenyl)phosphine oxide products via an initial substitution followed by a cyclization at the produced allene intermediate. [reaction: see text]     

Determination of traces of molybdenum in sea water by combined anion-exchange — graphite furnace atomic absorption spectrometry

Summary Traces of molybdenum in sea water have been preconcentrated by anion-exchange from acidified samples in the presence of sodium azide. Molybdenum adsorbs strongly on a column of Bio-Rad AG 1 (Cl^–) and can be stripped easily by elution with 2 mol/l NH₄Cl — 2 mol/l NH₄OH solution. Molybdenum in the effluent is determined by graphite furnace atomic absorption spectrometry. The combined method allows to determine traces of molybdenum in sea water as well as non-saline water on a 100 ml sample basis. The method gives a relative standard deviation of better than 8% at a molybdenum level of 10 g 1^–1 of sea water.

---

Bestimmung von Molybdänspuren in Meereswasser mit Hilfe einer Kombination von Anionenaustausch und elektrothermischer Atomabsorptionsspektrometrie

     

New reactions of 1-alkynes catalyzed by transition metal complexes

Recently discovered catalytic reactions with ruthenium and lanthanide metal complexes have extended the scope of 1-alkynes as useful reagents. The specific formation of aryl-substituted (Z)-1,3-enzymes via the dimerization of HC(triple bond) CR(1) (R(1) = aryl) has been attained using dimeric lanthanide complexes, the catalytic activity of which appears to be unaffected by time. The dimerization of HC(triple bond) CR(2) (R(2) = t-Bu, SiMe(3)) catalyzed by Ru(cod)(cot)/PR(3) or RuH(2)(PPh(3))(3) produces a good yield of butatrienes (Z)R(2)CH=C=C=CHR(2) with a high degree of selectivity. Under certain conditions, HC(triple bond) C=SiMe(3) dimerizes to yield exclusively (Z)-M(3)Si-C(triple bond) C-CH=CH-SiMe(3). The hydration of HC(triple bond)CR(3) (R(3) = alkyl, aryl) catalyzed by RuCl(2)/PR'(3) or CpRuCl(PR"(3))(2) has realized the first example of anti-Markovnikov regioselectivity in an addition reaction of water that produces aldehydes R(3)CH(2)bond;CHO. The application of this reaction to propargylic alcohols has lead to their formal isomerization to alpha,beta-unsaturated aldehydes. In contrast, the addition of amines R(4)bond;NH(2) (R(4) = aryl) to HCtbond;CR(5) (R(5) = alkyl, aryl) conforms to Markovnikov's rule to produce ketimines R(5)bond;(C=NR(4))bond;CH(3) when catalyzed by a Ru(3)(CO)(12)/additive. Since the reaction can be performed in air without the need for any solvents, it enables the practical synthesis of aromatic ketimines, which are difficult to prepare by conventional methods. The synthesis of indoles using deactivated anilines is one practical application of this reaction. The mechanisms of some of these reactions have been analyzed in detail with the aid of theoretical calculations.     

Cobaltporphyrin‐adsorbed carbon black: highly efficient electrocatalysts for oxygen reduction

meso‐Substituted cobalt porphyrins adsorbed on carbon black were prepared as catalysts for the electroreduction of O₂. The catalyst, which was prepared by using a homogenizer in mixing cobalt tetraethylporphyrin and carbon black, gave rise to electroreduction of O₂ at a remarkably positive potential (E_p = 0.45 V versus saturated calomel electrode (SCE)) and showed a high selectively for the four‐electron reduction (n = 3.8). Electrochemical study and extended X‐ray absorption fine structure (EXAFS) analysis revealed that the adsorbed face‐to‐face dimeric aggregates of cobalt porphyrin molecules were highly efficient catalysts for electroreduction of O₂. Copyright © 2005 John Wiley & Sons, Ltd.     

Studies of the polymerization of diallyl compounds. XXVII. Copolymerization of diallyl tartrate with several vinyl monomers

The radical copolymerization of diallyl tartrate (DATa) (M₁) with diallyl succinate (DASu), diallyl phthalate (DAP), allyl benzoate (ABz), vinyl acetate (VAc), or styrene (St) was investigated in order to disclose in more detail the characteristic hydroxyl group's effect observed in the homopolymerization of DATa. In the copolymerization with DASu or DAP as a typical diallyldicarboxylate, the dependence of the rate of copolymerization on monomer composition was different for different copolymerization systems and unusual values larger than unity for the product of monomer reactivity ratios, r₁r₂, were obtained. In the copolymerization with ABz or VAc (M₂), the r₁ and r₂ values were estimated to be 1.50 and 0.64 for the DATa/ABz system and 0.76 and 2.34 for the DATa/VAc system, respectively; the product r₁r₂ for the latter copolymerization system was found again to be larger than unity. In the copolymerization with St, the largest effect due to DATa monomer of high polarity was observed. Solvent effects were tentatively examined to improve the copolymerizability of DATa. These results are discussed in terms of hydrogen-bonding ability of DATa.     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.     

Stereospecific polymerization of isobutyl vinyl ether catalyzed by calcined iron sulfate

The polymerization of isobutyl vinyl ether was studied in a heterogeneous system using iron (II) sulfate calcined in air at various temperatures as a catalyst. The maximum activity was shown by the catalyst calcined at 700°C, which effected the polymerization at room temperature in a few seconds, while the sulfate treated at 750°C was totally inactive. Poly(vinyl ethyl ether) was also obtained by the FeSO₄ (700°C) catalyst at room temperature. This catalyst formed the crystalline polymer (melting temperature 135–138°C) when the reaction was performed in toluene as solvent at room temperature. Poisoning experiments with Hammett indicators were carried out with the FeSO₄ (700°C) catalyst. The treatment with n-butylamine rendered it inactive in the reaction of isobutyl vinyl ether, while its catalytic activity was little affected by dicinnamalacetone. On the basis of the observed results, the nature of active sites of catalyst is discussed.