Temperature stabilized optical waveguide modulator

A low drive-voltage optical modulator using a Ti-diffused UNbO₃ optical waveguide has been fabricated. Stabilization against ambient temperature change was realized by using a miniature halfwave plate. The halfwave voltage, 3 dB bandwidth, optical insertion loss and extinction ratio were 3·8 V (at 1·06m wavelength), 850 MHz, 10 dB and 13 dB, respectively. A reduction scheme for the optical absorption caused by metallic electrodes, and an analysis of the modulator high frequency response are also reported.     

Determination of methylated arginines by column-switching high-performance liquid chromatography-fluorescence detection

A column-switching high-performance liquid chromatography (HPLC)-fluorescence detection method for the determination of three methylated arginines, N(G)-monomethyl-L-arginine (L-NMMA), N(G),N(G)-dimethyl-L-arginine (asymmetric dimethyl-L-arginine, ADMA), and N(G),N(G)'-dimethyl-L-arginine (symmetric dimethyl-L-arginine, SDMA), which are endogenous nitric oxide synthase inhibitors, was developed. After fluorescence derivatization of plasma samples with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), the samples were injected into the HPLC system. The NBD-derivatized methylated arginines were trapped on a cation exchange column with filter to remove proteins, separated within 42 min on a reversed-phase column, and detected at an emission wavelength of 530 nm with excitation at 470 nm. The detection limits were 10 fmol for L-NMMA and 20 fmol for ADMA and SDMA with a signal-to-noise ratio of 3. A good linearity for calibration curves for each methylated arginine was observed within the range of 50-5000 fmol using homoarginine as an internal standard. The proposed method was applied to the quantitative determination of L-NMMA, ADMA and SDMA in rat plasma. The concentrations of L-NMMA, ADMA and SDMA in rat plasma were 0.16 +/- 0.01, 0.73 +/- 0.02 and 0.41 +/- 0.05 micromol l(-1), respectively (n= 5).     

Polymerization of coordinated monomers VII. A kinetic study on the alternating copolymerization of methyl methacrylate with styrene using stannic chloride

The alternating copolymerization of methyl methacrylate with styrene in the presence of stannic chloride at ?50°C in toluene was kinetically investigated both under photoirradiation and with the tri-n-butylboron-benzoyl peroxide initiator. The concentrations of the binary and ternary molecular complexes in the copolymerization solution were estimated by use of the equilibrium constants. The rates are found to be proportional to the 1.5th and 1.0th orders of the concentration of the ternary molecular complex composed of stannic chloride, methyl methacrylate, and styrene, under photoirradiation and with initiator, respectively. The conversion increases proportionally with the polymerization time, while the degree of polymerization is constant irrespective of the time. The rates depend linearly upon the square root of the intensity of the incident light and upon the concentration of tri-n-butylboron, respectively. The alternating copolymerization is confirmed experimentally to precede the homopolymerization of the monomer charged in large excess both under photoirradiation and with initiator. The kinetic results indicate consistently that the alternating copolymerization proceeds through the homopolymerization of the ternary molecular complex in the steady state with a bimolecular termination. Both the conventional radical mechanism and the double complex mechanism are unsuitable for the present alternating copolymerization.     

Synthesis of substituted polymethylenes by radical polymerization of N,N,N′,N′-tetraalkylfumaramides and their characterization

Radical polymerization of N,N,N′,N′-tetraalkylfumaramides (TRFAm) bearing methyl, ethyl, n-propyl, isopropyl, and isobutyl groups as N-substituents (TMFAm, TEFAm, TnPFAm, TIPFAm, and TIBFAm, respectively) was investigated. In the polymerization of TEFAm initiated with 1,1′-azobiscyclohexane-1-carbonitrile (ACN) in benzene, the polymerization rate (R_p) was expressed as follows: R_p = k [ACN]^0.28 [TEFAm]^1.26, and the overall activation energy was 102.1 kJ/mol. The introduction of a bulky alkyl group into N-substituent of TRFAm decreased the R_p in the following order: TMFAm > TEFAm > TnPFAm > TIBFAm > TIPFAm ～ 0. The relative reactivities of these monomers were also investigated in radical copolymerization with styrene (St) and methyl methacrylate (MMA). In copolymerization of TRFAm (M₂) with St (M₁), monomer reactivity ratios were determined to be r₁ = 1.07 and r₂ = 0.20 for St–TMFAm, and r₁ = 1.88 and r₂ = 0.11 for St–TEFAm, from which Q₂ and e₂ values were estimated to be 0.35 and 0.44 for TMFAm, and 0.19 and 0.47 for TEFAm, respectively. The other TRFAm were also copolymerized with St, but copolymerization with MMA gave polymers containing a small amount of TRFAm units. The polymer from TRFAm consists of a less-flexible poly(N,N-dialkylaminocarbonylmethylene) structure. The solubility and thermal property of the polymers were also investigated.     

Transition-Metal Complexes with Nano-Sized Phosphine and Pyridine Ligands-Catalysis,Fluxional Behavior and Molecular Recognition

Nano-sized phosphine and pyridine ligands having tetraphenylphenyl-, m-terphenyl-, poly(benzylether) moieties were synthesized. These ligands showed a remarkable effect on homogeneous transition metal catalyzed reactions. Pd(II) complexes with tetraphenylphenyl substituted pyridine ligands show high catalytic activities for oxidation of ketones suppressing Pd black formation and maintains the catalytic activity for a long time. Rh(I) complex catalysts with m-terphenyl substituted phosphine ligands showed remarkable rate acceleration in the hydrosilylation of ketones. In addition, several phosphinocalixarene ligands were synthesized and their coordination studies with Pd(II), Pt(II), Ru(II), Ir(I), and Rh(I) metals were documented. Ir(I) and Rh(I) cationic complexes with a 1,3,5-triphosphinocalix[6]arene ligand showed dynamic behavior with size-selective molecular recognition.     

Simultaneous accumulation of both skeletal and appendage-based diversities on tandem Ugi/Diels-Alder products

Diversity-oriented organic synthesis (DOS) is a key concept for construction of skeletally diverse small molecule libraries to discover drug-like small molecules. Here, we describe a DOS class to transform a complex 7-oxanorbornene skeleton, which is readily accessible by a tandem Ugi/Diels-Alder reaction, into two heterotricycle skeletons selectively by using tandem ROM/CM/RCM reaction. In the present study, the mode of cyclization is pre-encoded by building blocks used in the complexity-generating tandem Ugi/Diels-Alder reaction. Since variable alkenes can be used in the CM reaction, our approach can be extended to construct both skeleton- and appendage-diverse small molecule libraries.     

Solvent extraction and spectrophotometric determination of iron(II) with 2,2′-dipyridyl-2-furancarbothiohydrazone

2,2′-Dipyridyl-2-furancarbothiohydrazone (DPFTH) was used for the spectrophotometric determination of trace amount of iron(II) after the extraction process. Iron(II) can be quantitatively extracted with DPFTH in benzene from aqueous solution buffered to 3.0–8.0. The extracted species has absorption maxima at 440, 477, and 738 nm and obeyed Beer's law over the range 0–40 μg of iron in 10 ml at 738 nm. The molar absorptivity at this wave length is 1.17 × 10⁴ liters mole^?1 cm^?1. The proposed method is relatively selective for iron(II) and is satisfactorily applied to the determination of the total iron in natural waters. The proton dissociation constants of the ligand determined spectrophotometrically were pK_a1 = 2.88 and pK_a1 = 6.70 at 25 °C and μ = 0.1.     

Electrochemical synthesis of a polypyrrole thin film with supercritical carbon dioxide as a solvent

A conductive polypyrrole (PPy) film was successfully synthesized in a homogeneous supercritical carbon dioxide (scCO2)/acetonitrile (AN) system. The occurrence of a homogeneous supercritical state was confirmed by observations of the phase behavior of the system through a high-pressure cell with a viewing window. The concentration of a supporting electrolyte, tetrabutylammonium hexafluorophosphate (TBAPF6), significantly changed the phase behavior of the scCO2/AN system. The polymerization rate of the film in that system decreased with further addition of CO2. This result suggested that the low viscosity of scCO2 did not play an important role in improving the growth rate of the PPy film. The low polymerization rate might have been due to the electron-transfer resistance arising from the low dielectric constant of scCO2/AN mixture. The roughness of the film prepared in the homogeneous scCO2/AN system was 1/10 that synthesized in AN itself as a solvent. The slow growth of film and the high diffusion rate of the monomer seemed to account for the smooth flat film formation.     

Hydrogen evolution from water by use of viologen polymers as electron transfer catalyst

The behavior of viologen polymer (P-V²⁺) as an electron transfer catalyst in the reaction of hydrogen generation was studied. In the photoirradiation system, which contains triethanolamine (TEA), Ru(bpy)³⁺₃, and P-V²⁺, the amount of hydrogen evolution was less than methyl viologen (MV²⁺); P-V²⁺, however, was more effective in sodium dithionite as the electron donor and showed higher initial rates than MV²⁺.     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.