Analysis of A-DLTS spectra of MOS structures with thin NAOS SiO2 layers

A set of MOS structures with thin SiO₂ layers prepared by nitric acid oxidation (NAOS) method was investigated using acoustic deep level transient spectroscopy (A-DLTS) to explain the role of annealing treatment (post-oxidation annealing (POA) and post-metallization annealing (PMA)) at different conditions on the distribution of interface states. The activation energies of interface states and the corresponding capture cross-section were calculated both from Arrhenius plots constructed for individual peaks of the A-DLTS spectra and applying the method of modeling of measured acoustic spectra. The energy distribution of the interface states was determined also from the dependence of acoustoelectric response signal (ARS) on the external bias voltage (U _ac - V _G curves). By comparing the A-DLTS spectra, U _ac - V _G characteristics and some electrical measurements (G-V, I-V curves) of investigated MOS structures with no treatment with those treated with POA and/or PMA, the role of individual treatments was observed. The definite decrease of the interface states in the structures with the PMA treatment in comparison with the POA treatment was confirmed too.     

Octave-spanning carrier-envelope phase stabilized visible pulse with sub-3-fs pulse duration

The visible second harmonic of the idler output from a noncollinear optical parametric amplifier was compressed using adaptive dispersion control with a deformable mirror. The amplifier was pumped by and seeded in the signal path by a common 400 nm second-harmonic pulse from a Ti:sapphire regenerative amplifier. Thus, both the idler output and the second harmonic of the idler were passively carrier-envelope phase stabilized. The shortest pulse duration achieved was below 3 fs.     

Polarity determination of wurtzite-type crystals using hard x-ray photoelectron diffraction

The surface structure of a single-crystal ZnO wafer was studied by angle-resolved x-ray photoelectron spectroscopy (ARXPS) using synchrotron radiation. As a result, well-defined x-ray photoelectron diffraction (XPD) patterns were obtained for the (0001) and (000$\overline{1}$) polar surfaces using the photoemission from the Zn 2p_3/2 and O 1s core levels. The XPD patterns were indexed assuming forward scattering of photoelectrons by neighboring ions. Further, the XPD patterns for the (0001) and (000$\overline{1}$) surfaces were different from each other, indicating the possibility for using the XPD technique for polarity determination.     

Phonon density of states and compression behavior in iron sulfide under pressure

We report the partial phonon densities of states (DOS) of iron sulfide, a possible component of the rocky planet's core, measured by the 57Fe nuclear resonant inelastic x-ray scattering and calculate the total phonon DOS under pressure. From the phonon DOS, we drive thermodynamic parameters. A comparison of the observed and estimated compressibilities makes it clear that there is a large pure electronic contribution in the observed compressibility in the metallic state. Our results present the observation of thermodynamic parameters of iron sulfide with the low-spin state of an Fe2+ ion at the high density, which is similar to the condition of the Martian core.     

Fabrication and hard X-ray photoemission analysis of photocathodes with sharp solar-blind sensitivity using AlGaN films grown on Si substrates

Photocathode devices operating in reflection-mode, where the photoemission is detected on the same side as the light irradiation, were developed for the detection of deep ultraviolet light by using p-Al_xGa_1−xN films grown on Si(1 1 1) substrates. The external quantum efficiencies were as high as 20-15% at 200 nm and 280 nm, while the value was as low as 10⁻²% at 310 nm. The on-off ratio was more than four orders of magnitude, which represents high solar-blind sensitivity. The escape probability of Al_xGa_1−xN photocathode was decreased with increase of AlN mole fraction. The effective barrier potential against the photoelectron emission near the surface was reduced due to the upward shift of conduction band of Al_xGa_1−xN. The photoemission from the Al_xGa_1−xN films terminated with Cs-O adatoms will be discussed in terms of band diagrams that were evaluated by hard X-ray photoelectron spectroscopy.     

Magnetic properties of La-Co substituted M-type strontium hexaferrites prepared by polymerizable complex method

Magnetic properties of La-Co substituted M-type strontium hexaferrites were studied. The samples were prepared by polymerizable complex method. Crystal structure of samples has been investigated by powder X-ray diffraction (XRD). Single-phase M-type strontium hexaferrites with chemical composition of Sr_1.05−xLa_xFe_12−xCo_xO₁₉ (x=0-0.4) were formed by heating at 1173 K for 24 h in air. Magnetic properties were discussed by measurements of M-H curves with vibrating sample magnetometer (VSM). La-Co substituted M-type strontium hexaferrites prepared by polymerizable complex method showed typical magnetic hysteresis of hard ferrite. The coercive force increased significantly by La-Co substitution with polymerizable complex method. Maximum coercive force achieved in this study is 8.0 kOe (640 kA/m). Scanning electron microscopy revealed that the prepared ferrite particles have plate-like shape of diameter range between 20 and 500 nm.     

Quasi-Nambu-Goldstone modes in Bose-Einstein condensates

We show that quasi-Nambu-Goldstone (NG) modes, which play prominent roles in high energy physics but have been elusive experimentally, can be realized with atomic Bose-Einstein condensates. The quasi-NG modes emerge when the symmetry of a ground state is larger than that of the Hamiltonian. When they appear, the conventional vacuum manifold should be enlarged. Consequently, topological defects that are stable within the conventional vacuum manifold become unstable and decay by emitting the quasi-NG modes. Contrary to conventional wisdom, however, we show that the topological defects are stabilized by quantum fluctuations that make the quasi-NG modes massive, thereby suppressing their emission.     

Laser deposition of iron on graphite substrates

Pulsed laser deposition of iron atoms on graphite substrates was performed to produce iron carbide films. Mössbauer spectra of the sample revealed that iron carbide was produced on the substrate surface and that an α-Fe layer was produced above the iron carbide layer. When the substrate temperature was maintained at 300 K, the iron carbide layer had a hyperfine magnetic distribution because it contained high density of defects. Laser deposition of Fe at 570 K produced cementite Fe₃C with fewer defects due to enhancement of thermal reactions or annealing of the films. The orientation of hyperfine field of the Fe₃C film was parallel to the substrate surface.     

Radial breathing modes of single-walled carbon nanotubes in resonance Raman spectra at high temperature and their chiral index assignment

Radial breathing modes (RBMs) in resonance Raman spectra from single-walled carbon nanotubes (SWCNTs) on a SiO₂/Si (0 0 1) substrate are studied between 25 and 720 °C. A change in the relative intensity of each RBM peak with temperature is observed, which originates from the temperature dependence of the resonance condition of nanotubes. For 25 °C, each RBM peak is reasonably assigned on the basis of data in the literature [J. Maultzsch, H. Telg, S. Reich, F. Hennrich, C. Thomsen, Phys. Rev. B 72 (2005) 205438]. By taking into account the temperature-dependent behavior of the relative intensity of the RBM peaks, each RBM peak is successfully assigned even for 720 °C. It is found that most of the observed RBM peaks for a laser excitation energy of E_exc = 1.96 eV are from chiral SWCNTs. These results make it possible to discuss further details of the chirality-dependent growth behavior observed for in situ Raman spectroscopy.