A mediator-type biosensor as a new approach to biochemical oxygen demand estimation

A novel biosensor for the determination of biochemical oxygen demand (BOD) was developed using potassium hexacyanoferrate(III) [HCF(III)] as a mediator. The sensor element consists of a three-electrode system, with both working and counter electrodes compactly integrated as a disposable using etching and electroplating processes. Pseudomonas fluorescens biovar V (isolated from a wastewater treatment plant) was immobilized on the surface of the working electrode using poly(vinyl alcohol)-quaternized stilbazol (PVA-SbQ) photopolymer gel. Synthetic wastewater described by the Organization for Economic Cooperation and Development (OECD) was used as a standard solution instead of glucose-glutamic acid synthetic wastewater. The conditions of amperometric measurement were optimized at +600 mV (vs. Ag/AgCl) operating potential, namely 40 mM HCF(III) in a 0.1 M phosphate buffer (pH 7.0) at 20 degrees C. The sensor response was linear from 15 up to 200 mg O l-1 BOD. The response time was 15 min at 200 mg O l-1 BOD. To demonstrate the wide metabolic range of activity of the sensor, the sensor response to 14 substances in four categories of organic compounds was investigated. Further, it was shown that the response of this BOD sensor was not influenced in samples with low concentrations of dissolved oxygen under the measuring conditions used. For real wastewaters, the BOD values were determined using the sensor and compared favorably with those determined by the conventional BOD5 method.     

Catalytic asymmetric oxidative lactonizations of meso-diols using a chiral iridium complex

A chiral amino alcohol/Ir complex catalyzes the asymmetric oxidative lactonizations of meso-diols to give the corresponding lactones in up to 81% ee.     

Preparation of Pb2CrO5 thin films by an electron-beam evaporation technique

Pb₂CrO₅ thin films have been prepared by an electron-beam evaporation deposition technique on glass substrates using ceramic disks. The thin film fabrication conditions are studied by x-ray diffraction, replica electron micrography and scanning electron microscopy as parameters of substrate temperature, annealing temperature and annealing time. As-deposited Pb₂CrO₅ thin films in the amorphous state are crystallized by heat treatment. Annealed thin films are structurally classified into three types according to the preferred orientations which depend on substrate temperatures (T _s:

1. (i)

   (020) atT _s=room temperature

2. (ii)

   mainly (310) atT _s=100 ‡C, and

3. (iii)

   (200) atT _s=350 ‡C.

The substrate temperature contributes to film orientations; annealing temperature and time-enhance film crystallinity. The annealing temperature is fixed between 400 and 500 ‡C in making appropriate Pb₂CrO₅ thin films. These thin films, ranging between 0.3 and 2.0 Μm in thickness, are prepared at a deposition rate of 1500 å/m.

     

Synthesis of multisubstituted 1,3-butadienes using the ruthenium-catalysed double addition of trimethylsilyldiazomethane to alkynylboronates

The ruthenium-catalysed double addition of trimethylsilyldiazomethane to alkynes developed by Dixneuf and co-workers was applied to the synthesis of 2-alkyl- or 2-aryl-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1,4-bis(trimethylsilyl)-1,3-butadienes by use of alkynylboronates instead of alkynes. Di- and tetrasubstituted 1,3-butadienes were prepared from a 2-boryl-1,4-disilyl-1,3-butadiene, using the Suzuki-Miyaura coupling reaction, iodolysis of the alkenylsilane moieties with N-iodosuccinimide and hydrolysis of the carbon-silicon bonds with trifluoroacetic acid. The same compound was converted also to a bicyclic compound, a trisubstituted 1,3-butadiene and a dienone through the Diels-Alder reaction, oxidation of the alkenylboronate moiety and the Mukaiyama aldol reaction.     

Synthesis and antiulcer activity of optical isomers of 2-(4-chlorobenzoylamino)-3-[2(1H)-quinolinon-4-yl]propionic acid (rebamipide).

The enantiomers of 2-(4-chlorobenzoylamino)-3-[2(1H)-quinolinon-4-yl] propionic acid [(+/-)-1, rebamipide, OPC-12759], a new antiulcer agent that enhances mucosal resistance, were synthesized from optically active alpha-amino acid derivatives of 2(1H)-quinolinone. The key intermediates, alpha-amino acid derivatives, were prepared by asymmetric synthesis and optical resolution. The (+)-1 was about 1.7 times as potent as the (-)-isomer in antiulcer activity against ethanol-induced gastric ulcers.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.