Effect of Anomeric Linkage on the Sialylation of Glycosides by Cells

The synthesis of sialylated glycosides using saccharide primers and cells was investigated. α · and β · Saccharide primers were chemically synthesized and introduced into B16 melanoma cells to prime oligosaccharide synthesis. Incorporation of α‐ and β‐dodecyl lactosides into B16 cells resulted in the sialylation of the galactose residue to give GM3‐type oligosaccharides. The β‐dodecyl galactoside primer was sialylated but the α‐dodecyl galactoside primer was not. Both the α‐ and β‐dodecyl glucoside primers were not elongated. In the glycosylation of primers by cells, this research confirmed that sialyl transferases tolerate acceptor modifications and are permissive to primer elongation regardless of the α‐ or β‐linkage to the aglycon unit. However, the presence of the terminal galactose residue that is β‐linked to the adjacent saccharide or aglycon unit is essential for sialylation by cellular enzymes to occur.     

Rigid-rod polymers with polysiloxane side chains. I. Synthesis and characterization of rigid-rod polyimides with polysiloxane side chains and their compatibility with linear polysiloxanes

Rigid-rod aromatic polyimdies having polydimethylsiloxane side chains were prepared for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The polyimides were obtained by imidizing the polyamide-acids bearing the side chains either thermally or chemically, which were synthesized by reacting 4,4′-diaminobiphenyl-terminated polysiloxane macromonomers with pyromellitic dianhydride in THF. The polyamide-acid films obtained by removing the solvent were soluble in THF, but the polyimides were insoluble in any common solvent. The polyimides showed no melting transition below 350°C on DSC analysis, at which temperature the side chain started decomposing. Although all the polyimides were anisotropic as observed by a polarizing microscope, x-ray diffraction analysis suggested the presence of only limited chain organization. Blends with linear polydimethylsiloxanes were prepared by casting the THF solution containing the polyamide-acid and the polydimethylsiloxane, followed by solvent evaporation and thermal imidization. With relatively longer side chains, the polyimides were proved to be compatibilized with polydimethylsiloxanes. © 1994 John Wiley & Sons, Inc.     

Competing forward and reversed chain reactions in one-dimensional molecular line growth on the Si(100)-(2 x 1)-H surface

To explore the role of competing forward and reversed chain reactions in the growth of a one-dimensional (1D) molecular line on the Si(100)-(2 x 1)-H surface, controlled experiments were performed with various alkene molecules by scanning tunneling microscopy (STM) at various temperatures. It was observed that the end dangling bond (DB) of a styrene line, fabricated by a chain reaction on the Si(100)-(2 x 1)-H surface at 300 K, initiated a reverse chain reaction at 400 K, leading to the complete disappearance of the styrene line with zero-order desorption kinetics (rate constant k = 1.17 x 10-2 s-1 at 400 K). In the case of 2,4-dimethylstyrene, the reversed chain reaction was observed even at 300 K. These results suggest that the appearance of a molecular line in an STM image is determined by the rates of competing forward and reversed chain reactions at a given temperature. As predicted, 1D lines formed by the DB-initiated chain reaction of 1-hexene and 1-heptene on Si(100)-(2 x 1)-H were observed at 180 K because of the reduced desorption rate, despite the fact that those molecules showed no line growth at 300 K. These results indicate that the scope of forming 1D molecular lines on the Si(100)-(2 x 1)-H surface with various alkenes is much wider than anticipated in previous studies.     

Graphite furnace atomic absorption spectrometric determination of ruthenium in iron meteorites

A procedure for the determination of ruthenium in iron meteorites involves its oxidation to RuO₄ by sodium periodate in hydrochloric acid and extraction of the tetroxide into chloroform. Various parameters of the method were studied: sample dissolution, optimum amount of oxidant, shaking time, distribution ratio and stability of the complex. The relative standard deviation assessed from replicate analyses of the North Chile iron meteorite was 6.6%. There are no certified standards for iron meteorites, but the value of 20.0 μg g^? obtained for this meteorite compares well with a reported abundance of 19.3 μg g^?1 obtained by radiometric neutron-activation analysis (RNAA). The analysis of 15 meteorites that had previously been analysed by RNAA gave values averaging 11% below those reported by the latter method, but within the standard deviation of the RNAA data. It is considered that the present method is a more practical alternative to RNAA for the determination of ruthenium in iron meteorites.     

Sesquiterpenoids and flavonoids from the aerial parts of Tithonia diversifolia and their cytotoxic activity

Cytotoxicity-guided fractionation of the 80% EtOH extract of Tithonia diversifolia has resulted in the isolation of twelve sesquiterpenoids (1-12), including three new ones (4, 10, 12), and three known flavonoids (13-15). The structures of the new compounds were determined by analysis of their spectroscopic data. The isolated compounds showed cytotoxic activity against HL-60 leukemia cells with IC(50) values ranging from 0.13 to 13.0 microM, when etoposide used as a positive control gave an IC(50) value of 0.43 microM. The cancer growth inhibitory property of 9, the main cytotoxic compound in T. diversifolia, was examined using a disease-oriented panel composed of 39 human cancer cell lines in the Japanese Foundation for Cancer Research.     

Performance of spin-component-scaled Møller-Plesset theory (SCS-MP2) for potential energy curves of noncovalent interactions

An examination of the performance of density-fitted, spin-component-scaled, second-order M?ller-Plesset theory (SCS-MP2), SCS-MP2 with parameters optimized for nucleic acids (SCSN-MP2), and their local-correlation variants, SCS-LMP2 and SCSN-LMP2, is presented for the sandwich and T-shaped benzene dimers, the methane-benzene and H(2)S-benzene complexes, and the methane dimer over entire potential energy curves. These are compared to benchmark-quality estimates of the complete-basis-set limit for coupled-cluster theory through perturbative triple excitations, CCSD(T)/CBS. With the exception of the methane dimer, SCSN-LMP2/CBS tends to outperform SCS-LMP2/CBS with maximum relative errors of 6 and 18%, respectively, at the optimal CCSD(T)/CBS intermolecular distances. For the methane dimer, errors for SCS(N)-(L)MP2/CBS remain in the 0.2-0.3 kcal mol(-1) range, corresponding to a larger relative error of 40-50%. Although the local MP2 methods perform very similarly to their conventional counterparts when aug-cc-pVTZ or larger basis sets are used, in the absence of counterpoise correction the local approximation becomes significantly worse for the aug-cc-pVDZ basis set. The changes due to local correlation approximations for the aug-cc-pVDZ basis are reduced when diffuse functions are neglected for hydrogen atoms.     

Surface structure and interface dynamics of alkanethiol self-assembled monolayers on Au(111)

Scanning tunneling microscopy (STM) and high-resolution electron energy loss spectroscopy (HREELS) were used to examine the structural transitions and interface dynamics of octanethiol (OT) self-assembled monolayers (SAMs) caused by long-term storage or annealing at an elevated temperature. We found that the structural transitions of OT SAMs from the c(4 x 2) superlattice to the (6 x square root 3) superlattice resulting from long-term storage were caused by both the dynamic movement of the adsorbed sulfur atoms on several adsorption sites of the Au(111) surface and the change of molecular orientation in the ordered layer. Moreover, it was found that the chemical structure of the sulfur headgroups does not change from monomer to dimer by the temporal change of SAMs at room temperature. Contrary to the results of the long-term-stored SAMs, it was found that the annealing process did not modify either the interfacial or chemical structures of the sulfur headgroups or the two-dimensional c(4 x 2) domain structure. Our results will be very useful for a better understanding of the interface dynamics and stability of sulfur atoms in alkanethiol SAMs on Au(111) surfaces.     

Speciation of mercury in salmon egg cell cytoplasm in relation with metallomics research

Speciation of mercury in salmon egg cell cytoplasm was investigated by surfactant-mediated high-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICP-MS), where an ODS (octadecylsilica) column coated with a bile acid derivative, CHAPS (3-[(3-cholamidopropyl)-dimethylammonio]-1-propane sulfonate), was used for species separation. Prior to the speciation analysis, total Hg in the cell cytoplasm was determined by ICP-MS at m/z 202 in a flow injection mode. For the precise measurement, salmon egg cell cytoplasm was diluted five-fold with 0.1 M Tris (Tris(hydroxymethyl)aminomethane)-HNO₃ buffer solution, and the standard addition method was employed. Thus, the total concentration of Hg in cell cytoplasm was estimated to be 12.4 ng g⁻¹ on the wet weight basis. Next, the cell cytoplasm diluted five-fold with 0.1 M Tris-HNO₃ buffer solution was analyzed by surfactant-mediated HPLC with the dual detection system of a UV absorption detector and an ICP-MS instrument. Two peaks corresponding to some proteins and small molecules were mainly observed in those chromatograms. When salmon egg cell cytoplasm was diluted five-fold with 0.01 M Tris buffer solution or pure water, some precipitates appeared probably because of precipitation of hydrophobic proteins in cytoplasm. After the precipitates were eliminated with a membrane filter, the filtrate was subjected to the analysis by surfactant-mediated HPLC/UV/ICP-MS. As a result, the peaks for small molecular species of Hg were clearly observed at the retention time near 4.0 min (corresponding to low-molecular weight zone) in the chromatograms with UV absorption detection as well as with Hg- and S-specific ICP-MS detections. The small molecule bound with Hg was identified as cysteine through the cysteine-spiked experiment. In addition, the protein fraction on the chromatogram obtained by using the CHAPS-coated ODS column was further analyzed by SEC (size exclusion chromatography). Consequently, several protein peaks with molecular weight of 300, 50 and 12 kDa were observed in all the detections of UV absorption, Hg and Se, although two peaks among them were coincident in the case of S. These results indicate that Hg in salmon egg cell cytoplasm binds with proteins containing selenocysteine and/or cysteine residues in proteins.     

Fluorescence enhancement by hydroperoxides based on a change in the intramolecular charge transfer character of benzofurazan

Strong fluorescence signals were observed after the reaction of novel reagents with hydroperoxides.     

Indium tribromide-catalyzed deacetoxylation of propargylic acetate with triethylsilane

Indium(III) bromide catalyzed the deacetoxylation of propargylic acetates with Et₃SiH to produce the corresponding internal alkynes containing a variety of functional groups in good yields.