Comparison of PAMAM-Au and PPI-Au nanocomposites and their catalytic activity for reduction of 4-nitrophenol

Dendrimer-Au nanocomposites are prepared in aqueous solutions using poly(amidoammine)dendrimers (PAMAM) (generation 2, 3, and 5) and poly(propyleneimine)dendrimers (PPI)(generation 2, 3, and 4) by wet chemical NaBH(4) method. The Au nanoparticles thus obtained are 2-4 nm in diameter for both dendrimers and no generation dependence on the particle size is observed, whereas the generations of the dendrimers are increased as stabilization of Au-nanoparticles is achieved with lower dendrimer concentrations. Studies of the reduction reaction of 4-nitrophenol using these nanocomposites show that the rate constants for the PAMAM dendrimers (generations 2 and 3) are higher than those for the PPI dendrimers (generations 2 and 3), while a distinct difference in the rate constants is not seen for the PAMAM dendrimer (generation 5) or the PPI dendrimer (generation 4). In addition, the rate constants for the reduction of 4-nitrophenol involving all the dendrimers decrease with increases in dendrimer concentrations.     

Synthesis and properties of bis(pyrazino[2′,3′:4,5]imidazole)-fused 1,2,5,6-tetrahydro-1,4,5,8,9,10-hexaazaanthracenes: a new fluorescent nitrogen-rich heterocycle

Nitrogen-rich heterocycles, bis(pyrazino[2′,3′:4,5]imidazole)-fused 1,2,5,6-tetrahydro-1,4,5,8,9,10-hexaazaanthracenes (BPI-HAAs) were prepared by conventional Pd(OAc)₂/BINAP-catalyzed C-N coupling reactions of 5-aryl-3-bromoaminopyrazines. The BPI-HAA core is a planar structure with aromaticity, and this heterocycle exhibits red fluorescence and moderate electron-accepting characteristics.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Rhodium-Catalyzed Enantioselective Synthesis,Structures, and Properties of Single and Double Azahelicene-Like Molecules

The enantioselective synthesis of aza[6] and [7]helicene-like molecules have been achieved by the cationic rhodium(I)/axially chiral biaryl bisphosphine complex-catalyzed intramolecular [2+2+2] cycloaddition of cyanodiynes. This protocol was successfully applied to the diastereo- and enantioselective synthesis of an S-shaped double aza[6]helicene-like molecule with a high ee value of 89 %. Although no epimerization and racemization were observed in the double carbo[6]helicene-like molecule at 80 °C, epimerization and racemization of the double aza[6]helicene-like molecule proceeded at 80 °C. This double aza[6]helicene-like molecule showed good fluorescent quantum yields and chiroptical responses under both neutral and acidic conditions.     

Synthesis of nitrogen-containing heterocycles. 8. Preparation and ring-opening of spiro[cycloalkane-[1′,2′,4′]triazolo[1′,5′-c]pyrimidine] derivatives

Diaminomethylene- and aminomethylthiomethylenehydrazones [2] of cyclic ketones 1–8 readily reacted with ethoxymethylenemalononitrile to give spiro[cycloalkane-1,2′-[1,2′,4′]triazolo[1,5′-c]pyrimidine-8′-carbonitrile] derivatives 12–19 through the electrocyclic reaction of the initially formed condensation products 26 in moderate to high yields. The spiro[cyclopentanetriazolopyrimidine] derivatives underwent ring-opening at the cycloalkane moiety upon heating in solution to give 2-alkyl-5-substituted-[1,2,4]triazolo[1,5-c]pyrimidine-8′-carbonitriles 20–23 . When an alkyl substituent was introduced into the cyclopentane ring, cleavage of the spiro compounds occurred preferentially at the cyclopentane moiety between the spiro carbon and the more branched one. In contrast, the cyclohexane ring, especially of spiro-5-amino-triazolopyrimidines 17 and 18 strongly resisted to ring-opening under similar conditions, but those of 5-methylthiotriazolopyrimidines 14 gave up to 17 percent of cleavage after prolonged heating in hot ethanol. 2-t-Butyl-5-methylthio-2,3-dihydro[1,2,4]triazolo[1,5-c]pyrimidine-8-carbonitrile 25 [R³ = C(CH₃)₃] was highly susceptible to the cleavage even at room temperature and produced the corresponding 2-unsubstituted triazolopyrimidine 24 with loss of the t-butyl group.     

Controlled synthesis of amphiphilic block copolymers with pendant glucose residues by living cationic polymerization

Amphiphilic block copolymers of vinyl ethers (VEs) of the type —[CH₂CH(OCH₂CH₂OR)]_m—[CH₂CH(OiBu)]_n—were synthesized by living cationic polymerization, where R is a D-glucose residue, and m and n are the degrees of polymerization (m = 20–50; n = 11–89). To obtain them, sequential living block copolymerization of isobutyl vinyl ether (IBVE) and the vinyl ether carrying 1,2:5,6-diisopropylidene-D -glucose residue was conducted by using the HCl adduct of IBVE, CH₃CH(OiBu)Cl, as initiator in conjunction with zinc iodide. These precursor block copolymers had a narrow molecular weight distribution (M̄_w/M̄_n ∼ 1.1) and a controlled composition. Treatment of them with a trifluoroacetic acid/water mixture led to the target amphiphiles. The solubility of the amphiphilic block copolymers in various solvents depended strongly on composition or the m/n ratio. Their solvent-cast thin films were observed, under a transmission electron microscope, to exhibit various microphase-separated surface morphologies such as spheres, cylinders, and lamellae, depending on composition. © 1997 John Wiley & Sons, Inc.     

Controlled synthesis of glycopolymers with pendant D-glucosamine residues by living cationic polymerization

D -glucosamine-containing glycopolymers with well-controlled structure were synthesized by living cationic polymerization. To this end, D -glucosamine-containing vinyl ether (VE) of the type [CH₂()CH(OCH₂CH₂OR)] was prepared, where R denotes a 3,4,6-tri-O-acetyl-2-deoxy-2-phthalimide-β-D -glucopyranoside, i.e., the hydroxyl and amino groups in D -glucosamine residues are protected by acetyl and phthaloyl groups, respectively. It was found that (1) the efficient living cationic polymerization of VE monomer is achieved by a combination of ethylaluminum dichloride (EtAlCl₂) with an adduct of trifluoroacetic acid (TFA) and isobutyl VE (IBVE) [CH₃CH(OiBu)OCOCF₃] (i.e., TFA/EtAlCl₂ initiating system); and (2) the polymerization in toluene at the elevated temperature (0°C) is most suitable to proceed the homogeneous polymerization over the whole conversion range. The molecular weight distribution of the resulting polymers was very narrow ($ {\bar M}_w/{\bar M}_n \sim 1.1 $). Quantitative deprotection of the resulting precursor polymers was successfully achieved with hydrazine monohydrate to afford the corresponding water-soluble polymers with pendant D -glucosamine residues. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 751–757, 1997     

Isolation and cationic ring-opening polymerization of 2,3,5,6-tetrahydroimidazo[2,1-b][1,3]oxazole to produce a thermally stable polyurea

A bicyclic pseudourea, 2,3,5,6-tetrahydroimidazo[2,1-b][1,3]oxazole ( 1 ), was isolated for the first time, and its cationic and spontaneous polymerizations were examined. Both polymerizations gave poly(1,3-imidazolidin-2-one-1,3-diylethylene) ( 2 ) in high yields. The polymer is a crystalline solid with glass transition and melting temperature of 51°C and 286°C, respectively. Thermogravimetry showed that it is stable up to 450°C under nitrogen.