Viskosimetrische Untersuchung des Systems LiNO3−H2O

Zusammenfassung Die Temperaturabhängigkeit der Viskosität im System LiNO₃–H₂O und im Temperaturbereich 20–70°C wird in der Gleichung =A expB/T=T ₀ zusammengefaßt; aus der so erhaltenen Beziehung werden Rückschlüsse auf die Struktur der Lösungen gezogen.

---

Temperature dependence of the viscosity in the system LiNO₃–H₂O is expressed by =A expB/T-T ₀ in the temperature range 20–70°C. Possible relations to structural changes in the solutions are considered.

     

Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).

     

Cyclic chronopotentiometry of nickel(II) at mercury electrodes in acidic perchlorate solutions: Case of higher order nonregenerative reactions following electron transfer

The reduction of Ni²⁺ ions at mercury electrodes in acidic perchlorate solutions, at perchlorate concentrations below 0.2 M, is characterized by absence of kinetic control in the preceding step, and by a complex reaction mechanism following the electron transfer. This reaction sequence is known to involve intermetallic compound formation between Ni and Hg and is best described, as shown here, by a parallel second and third order kinetic scheme. Apparent rate coefficients for this kinetic scheme were determined using cyclic chronopotentiometric data and fitting by digital simulation. A linearization test of computed kinetic rate coefficients versus the number of transitions permits quantitative tests of validity of assumptions made.     

Coagulation of silver halide sols by thorium nitrate in the presence of potassium nitrate and potassium sulfate

Summary When silver iodide, silver bromide and silver chloride solsin statu nascendi are coagulated by thorium nitrate in the presence of potassium nitrate, three coagulation maxima appear. Two of them are identical with maxima that are found in absence of KNO₃, denoted with (II) and (IV) in fig. 1. The new maximum appears in the stability region of recharged sols (III). It is believed that this maximum is also—as maximum (IV)—caused by the coagulation of recharged silver halide sols by nitrate ions. Appearance of two nitrate coagulation maxima is explained by different charge densities on sol particles at various concentrations of Th(NO₃)₄ where they are formed. The new maximum indicates a lower charge density of sol particles. The possibility that the new maximum could have been caused by ionic complex species between thorium and nitrate ions has been rejected for data are available that the equilibrium constant for such complexes is small. In the presence of K₂SO₄ the coagulation effects of thorium nitrate on silver halide sols are markedly different. In acidified solutions only one coagulation maximum appears at rather high thorium nitrate concentrations [∼ 10⁻³ N Th (NO₃)₄] and the sol remains negatively charged [up to ∼ 10⁻² N Th (NO₃)₄] This is explained by complex formation of Th-ions and sulfate ions whereby ionic species of lower charge are formed, which exert a weaker coagulation effect. In neutral solutions another maximum at lower concentration of Th (NO₃)₄ is formed which appears to be the usual coagulation maximum produced by hydrolyzed thorium ions. The antagonistic effects of the salt pair Th (NO₃)₄-K₂SO₄ upon the coagulation of silver halides has been discussed and we have concluded that the large effects repeatedly reported can be explained not by simple electrostatic effects of ions in solution but rather by the formation of complexes between Th- and SO₄-ions.

---

Zusammenfassung Die Koagulationseffekte des Thoriumnitrats in Anwesenheit von Kaliumnitrat und Kaliumsulfat an Silberhalogenid-Solenin statu nascendi wurden ausführlich untersucht. Wenn Silberhalogenid-Sole durch Thoriumnitrat-L?sungen koaguliert werden, bilden sich zwei Koagulationsmaxima (II und IV, Abb. 1). Bei sehr niedrigen Konzentrationen des Thoriumnitrats koaguliert das Thorium-Ion (oder Komplex) die negativen Silberhalogenid-Sole, w?hrend bei h?heren Thoriumnitrat-Konzentrationen die ungeladenen Sole durch die NitratIonen koaguliert werden. Zwischen den zwei Maxima besteht ein weites Gebiet der stabilen umgeladenen Sole (III). Unter dem Zusatz von konstanten Mengen des Kaliumnitrats wird in diesem Gebiet ein neues (drittes) Maximum gebildet (Abb. 2–5), das auch als Koagulationsmaximum identifiziert wurde. Es wird angenommen, da? dieses Maximum wieder eine Koagulation der umgeladenen Silberhalogenid-Sole durch Nitrat-Ionen darstellt. Das Auftreten von zwei Koagulationsmaxima, verursacht durch Nitrat-Ionen, wird durch die verschiedenen Ladungsdichten an Solteilchen in Gebieten der Thoriumnitrat-Konzentrationen, in denen Maxima erscheinen, erkl?rt. Die M?glichkeit eines Koagulationseffektes der komplexen Ionen zwischen Thorium und Nitrat wurde ausgeschlossen, da die Gleichgewichtskonstante solcher Komplexe ziemlich niedrig ist. In Anwesenheit von Kaliumsulfat sieht die Koagulationskurve für Silberhalogenid Sole sehr unterschiedlich aus (Abb. 6–8). In den mit Salpeters?ure (0,001N) versetzten Solen erscheint nur ein Maximum bei ziemlich hohen Thoriumnitrat-Konzentrationen [∼ 10⁻³ N Th (NO₃)₄], wobei die Solteilchen noch immer negativ sind. Da Thorium- und Sulfat-Ionen sehr stabile Ionen-Komplexe bilden, die eine niedrigere Valenz aufweisen, kann das Maximum als Folge der Koagulationseffekte solcher Komplexe an die Silberhalogenid-Sole angesehen werden. In neutralen L?sungen zeigt sich neben dem beschriebenen Maximum noch ein anderes Maximum bei niedrigerer Thoriumnitrat-Konzentration. Dieses Maximum, hervorgerufen durch die hydrolysierten Thorium-Ionen, scheint das „normale“ Koagulationsmaximum zu sein. Dieantagonistischen Effekte des Salzpaares Th (NO₃)₄-K₂SO₄ bei der Koagulation der Silberhalogenide wurden diskutiert, und es wurde geschlossen, da? die gro?en Effekte, die wiederholt ver?ffentlicht worden waren, sehr schwer nur durch die elektrostatischen Anziehungen zwischen den Ionen erkl?rt werden k?nnen. Die Komplexbildung zwischen Thorium- und Sulfat-Ionen wird für den sogenannten antagonistischen Effekt in diesem Falle als verantwortlich angesehen.

---

---

Supported in part by U.S. Atomic Energy Commission Contract No. AT (30-1)-1801.     

Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Hybridization in some macrocyclic polyacetylenes

The hybridization in several cyclic polyacetylene compounds has been calculated by the maximum overlap method, assuming planar and non-planar geometries of the molecules. In the planar configuration the hybrids describing the molecular skeleton deviate from the corresponding bond directions. We have a few “bent” bonds, but in contrast to the situation in small rings, here the deviation angles are negative, i.e., the hybrids point toward the inside of the ring. Non-planar structures in which acetylene groups are kept in a plane and CCH₂ or CH₂ groups are displaced out of the plane show less deviation from the bond directions of bent bonds. Furthermore, the deviation angles decrease with an increase in the out-of-plane displacement of methylene groups. Finally, when the angle of bending of the molecules approaches 50°, the deviation vanishes, predicting a puckered conformation for the molecules. Correlation between CC stretching vibration frequencies and the corresponding CC bond overlap is discussed.     

IAEA quality control studies on determining trace elements in bioindicators

Twenty laboratories from 17 countries around the world participated in two analytical quality control exercises, coded NAT-5 and NAT-6, on determining trace and minor elements in plant bioindicator samples. 1398 laboratory mean values for 51 elements were submitted for two lichen and two moss materials. The submitted measurement results were evaluated as interlaboratory comparison (IC) exercises and as proficiency tests (PT) following standard procedures developed by the International Atomic Energy Agency (IAEA). The evaluations confirmed good performance of the participating laboratories for many elements. Furthermore, the laboratories performance based on IC criteria improved from the first exercise to the second one. Subsequent NAT-5 evaluation revealed systematic differences between the analytical values obtained non-destructively or after the total sample dissolution and the measurements following nitric acid sample dissolution (without the use of hydrofluoric acid) for some elements. The most critical elements for this kind of discrepancies appeared to be Al, Ca, Cr, Fe, Na, Ni, and Pb. After changing analytical methodologies in the concerned laboratories, more consistent values for those elements were obtained in NAT-6. This revised version was published online in August 2006 with corrections to the Cover Date.