Luminescent Polymer Consisting of 9,12‐Linked o‐Carborane

The synthesis of novel luminescent polymer containing p‐phenylene‐ethynylene and 9,12‐linked o‐carborane units alternately in the main chain is reported. The obtained polymer exhibits intense blue photoluminescence, providing the first insights into the optical properties of a 9,12‐disubstituted o‐carborane dye.  π‐Conjugated substituent at 9 and/or 12‐positions in o‐carborane is electrically independent, and both the HOMO and the LUMO levels slightly increase, whereas LUMO of the π‐conjugated substituent at 1 and/or 2‐positions in o‐carborane decrease.  Thus, it is deduced that polymers consisting of the 9,12‐linked o‐carborane unit are able to be applied as light‐emitting materials.

     

1,2,4-triazines. III. A convenient and general synthesis of 4H-[1,3,4]thiadiazolo[2,3-c][1,2,4]triazin-4-ones

4H-[1,3,4]Thiadiazolo[2,3-c][1,2,4]triazin-4-ones were prepared by cyclization of 3-thio-4-amino-1,2,4-tri-azine-3,5(2H,4H)-diones with a variety of acids in the presence of concentrated sulfuric acid. The synthesis appears to be general.     

Algorithm for in vitro Sun Protection Factor based on transmission spectrum measurement with concomitant evaluation of photostability

In the in vitro evaluation of Sun Protection Factor (SPF), the photostability of the ultraviolet (UV) filters can have a major impact, especially for high-SPF formulations, but is generally not taken into consideration. In this study, we present a UV transmission spectrum measurement system utilizing a high-sensitivity UV photomultiplier tube with concomitant evaluation of photostability. We have developed an algorithm to estimate SPF in vitro by converting the amount of UV light transmission through the sunscreen layer into cumulative relative erythema effectiveness to obtain one minimal erythema dose. Thus, the algorithm uses the same endpoint as in vivo SPF methods, but with a photomultiplier tube as the detector instead of skin. The values obtained showed an excellent correlation with in vivo SPF values, even for high-SPF sunscreens exceeding SPF 50. This method should be suitable as an in vitro SPF testing method for regulatory purposes.     

Quantitative Detection for Porphyromonas gingivalis in Tooth Pocket and Saliva by Portable Electrochemical DNA Sensor Linked with PCR

Here, a quantitative electrochemical analysis of periodontal bacteria in gingival crevicular fluid (GCF) and saliva by direct polymerase chain reaction (PCR) is presented. The electrochemical measurement was performed by mixing with PCR products and electrochemical indicator (bisbenzimidazole trihydrochloride). The peak current of indicator is reduced due to slower diffusion when the dye intercalates into the amplified DNA, and the degree of reduction in the peak current is correlates with the quantity of amplified DNA. Therefore, a quantitative analysis is possible by using our electrochemical method at the end point of PCR. In the GCF testing, The number of Porphyromonas gingivalis (Pg) detected by our electrochemical method at the end point of PCR were almost same compared with that were calculated by the conventional method of quantitative real? time PCR. In the saliva testing, the relationship between number of Pg in saliva and average pocket depth, and age‐dependence were also clearly observed. Since the saliva sample is obtained in a non‐invasive manner, this method is useful for the primary screening of periodontal disease. Moreover, our detection method is simple and uses a hand‐held potentiostat making it suitable for development of an on‐site periodontal diagnosis system.     

Electrooptics of beta-FeOOH particle in aqueous media 2. Field-strength dependence of decay and steady-state birefringence, and the hydrodynamic and electrooptic properties

Steady-state and decay birefringence, expressed in terms of the optical phase retardation per cell length delta/d, was measured on beta-FeOOH in aqueous ionic media at 633 nm and at 25 degrees C by an electric square-pulse technique over a wide range of field strength E to ca. 6 kV/cm. The field-strength dependence of both delta/d and field-free rotational relaxation time tau was determined at the sample concentrations between 0.0011 and 0.055 g/L and in the 0.02-2.0 mM NaCl concentration range. Extrapolation of both delta/d and tau values to infinitely high fields (E(2)-->infinity) could yield birefringence- and weight-average quantities, respectively. Observed tau values were decreased at weak fields but leveled off to ca. 0.3 ms at very high fields due to a slight polydispersity regarding the length and volume of particles. The weight-average relaxation time tau(w) was calculated with Perrin's expressions theoretically from the length, width, and volume of beta-FeOOH particles estimated in the dried state from electron micrograph. These quantities were variously averaged. The size distribution was discussed in terms of observed discrete histogram and theoretical (Weibull and Lansing-Kraemer) distribution functions. The sign of observed delta/d value was always positive. The infinitely high-field (delta/d)(infinity) values and the reduced optical anisotropy factor Delta g/n were evaluated by fitting to theoretical orientation functions. The intrinsic birefringence (n3-n1) could be estimated with the mean refractive index n(p) reported in the literature. For the spindle-shaped particle with an axial ratio of ca. 4, the sign of Delta g/n is always positive, whereas the quantity (n3-n1) was either negative (n(p) > 2.35) or positive (n(p) < 2.05) in sign or nearly zero (ca. n(p) = 2.26), depending critically on the n(p) values.     

Chemocavity: specific concavity in protein reserved for the binding of biologically functional small molecules

The idea that there should be a specific site on a protein for a particular functional small molecule is widespread. It is, however, usually not so easy to understand what characteristics of the site determine the binding ability of the functional small molecule. We have focused on the concurrence rate of the 20 standard amino acids at such binding sites. In order to correlate the concurrence rate and the specific binding site, we have analyzed high-quality X-ray structures of complexes between proteins and small molecules. A novel index characterizing the binding site based on the concurrency rate has been introduced. Using this index we have identified that there is a specific concavity designated as a chemocavity where a specific group of small molecules, i.e., canonical molecular group, is highly inclined to be bound. This study has demonstrated that a chemocavity is reserved for a specific canonical molecular group, and the prevalent idea has been confirmed.     

In situ AFM studies on self-assembled monolayers of adsorbed surfactant molecules on well-defined H-terminated Si(111) surfaces in aqueous solutions

The formation of self-assembled monolayers (SAMs) of adsorbed cationic or anionic surfactant molecules on atomically flat H-terminated Si(111) surfaces in aqueous solutions was investigated by in situ AFM measurements, using octyl trimethylammonium chloride (C8TAC), dodecyl trimethylammonium chloride (C12TAC), octadecyl trimethylammonium chloride (C18TAC)) sodium dodecyl sulfate (STS), and sodium tetradecyl sulfate (SDS). The adsorbed surfactant layer with well-ordered molecular arrangement was formed when the Si(111) surface was in contact with 1.0x10(-4) M C18TAC, whereas a slightly roughened layer was formed for 1.0x10(-4) M C8TAC and C12TAC. On the other hand, the addition of alcohols to solutions of 1.0x10(-4) M C8TAC, C12TAC, or SDS improved the molecular arrangement in the adsorbed surfactant layer. Similarly, the addition of a salt, KCl, also improved the molecular arrangement for both the cationic and anionic surfactant layers. Moreover, the adsorbed surfactant layer with a well-ordered structure was formed in a solution of mixed cationic (C12TAC) and anionic (SDS) surfactants, though each surfactant alone did not form the well-ordered layer. These results were all explained by taking into account electrostatic repulsion between ionic head groups of adsorbed surfactant molecules as well as hydrophobic interaction between their alkyl chains, which increases with the increasing chain length, together with the increase in the hydrophobic interaction or the decrease in the electrostatic repulsion by incorporating alcohol molecules into the adsorbed surfactant layer, the decrease in the electrostatic repulsion by increasing the concentration of counterions, and the decrease in the electrostatic repulsion by alternate arrangement of cationic and anionic surfactant molecules. The present results have revealed various factors to form the well-ordered adsorbed surfactant layers on the H-Si(111) surface, which have a possibility of realizing the third generation surfaces with flexible structures and functions easily adaptable to circumstances.     

Double-chelation-assisted Rh-catalyzed intermolecular hydroacylation between salicylaldehydes and 1,4-penta- or 1,5-hexadienes

Intermolecular hydroacylation between salicylaldehydes 1, 26-40 and 1,4-penta- or 1,5-hexadienes 4-13 by Rh-catalyst proceeded under mild reaction conditions to give a mixture of iso- and normal-hydroacylated products 14-25, 41-55, and 57-60. In the hydroacylation reaction, chelation of both salicylaldehyde and diene to the Rh-complex plays a crucial role. The ratio of iso- and normal-hydroacylated products could be regulated by the addition of salicylic acid or amines. The effects of various Rh-complexes, solvents, and additives were examined, and the plausible mechanisms of the catalytic cycle were proposed on the basis of the deuterium-labeling salicylaldehyde experiments.     

Direct evidence of electron flow via the heme c group for the direct electron transfer reaction of fructose dehydrogenase using a silver nanoparticle-modified electrode

The direct electron transfer reaction of fructose dehydrogenase (FDH) from Gluconobacter sp. on alkanethiol-modified silver nanoparticles (AgNPs) was examined using cyclic voltammetry and surface-enhanced resonance Raman scattering (SERRS). Using cyclic voltammetry, catalytic oxidation currents (based on the direct electron transfer reaction of FDH) were observed from a potential of approximately −100 mV (vs. Ag/AgCl, 3 M NaCl) in the presence of d-fructose, without a mediator. A comparison of the SERRS spectra and the resonance Raman spectra of FDH in solution indicated that the heme c site retained its six-coordinated low-spin heme after immobilization. Moreover, SERRS also demonstrated that the heme c of the adsorbed FDH was the electron transfer site within the enzyme.