Analytical quality control program used by the trace elements in foods and diets sub-network of the FAO European cooperative network on trace elements

Summary The analytical quality control program employed by the ongoing FAO study on 14 trace elements in nationally representative staple foods of European countries is presented. The analytical quality control used is based on: 1) precautions taken to avoid trace element contaminations or losses during sampling and sample handling; and, 2) on methods used to guarantee that the actual determinations yield correct results. The precautions are presented. A number of certified biological reference materials (RMs) were used to validate the analytical methods employed. The following staple food RMs were also prepared: wheat flour, potato powder, animal muscle (pork) and milk powder. They were tested for homogeneity and subjected to an interlaboratory comparison study on the basis of which recommended values for trace element concentrations were defined. Further, the mean relative standard deviation for the 95% confidence limits of the medians in all RMs was below 5% for Ca, Mg and Zn; below 10% for Mn; below 15% for Fe, Cu and Se; and below 25% for Mo and Ni. These RMs were used to control the analytical quality of the trace element determinations in the actual samples. It is concluded that important contaminations were avoided in sampling and sample handling and that use of the RMs described was necessary to guarantee the analytical quality of the results.     

The combined effects of two chlorine substituents and the non-additivities of chemical shifts in aliphatic dichloro esters

Carbon-13 NMR spectra were measured for 25 methyl esters of aliphatic dichlorocarboxylic acids for substituted propanoic to hexanoic acids. Observed ¹³C shifts are compared with calculated shift values obtained from the shifts of the corresponding monochloro esters by applying a simple sum method. The greatest failures from additivity are observed for αβ and αα substituted carbons. The combined effects of two chlorine substituents were determined, and compared with those obtained from chlorine substituent effects in monochloro esters by assuming additivity. The trends displayed by the combined effects, and also by the non-additivity effects, are discussed.     

An extraction-based assay for neutral anionophores: the measurement of high binding constants to steroidal receptors in a nonpolar solvent

The extraction-based protocol for measuring binding constants, developed by Cram and co-workers, has been extended for use with anionic substrates. The method is especially useful for high-affinity receptors, allowing very high binding constants to be measured in nonpolar solvents. Distribution constants K(d) between chloroform and water have been obtained for tetraethylammonium chloride and bromide, thus calibrating the method for these two substrates. Application to steroidal podands 5-9 has confirmed the ability of electron-withdrawing groups to enhance hydrogen-bond donor capabilities. Binding constants of approximately 3 x 10(7) M(-1) have been measured for the most powerful receptor 7. An X-ray crystal structure of 15, the methyl ester analogue of 7, reveals a well-defined binding site preorganised for anion recognition.     

Evaluation of wet oxidation pretreatment for enzymatic hydrolysis of softwood

The wet oxidation pretreatment (water, oxygen, elevated temperature, and pressure) of softwood (Picea abies) was investigated for enhancing enzymatic hydrolysis. The pretreatment was preliminarily optimized. Six different combinations of reaction time, temperature, and pH were applied, and the compositions of solid and liquid fractions were analyzed. The solid fraction after wet oxidation contained 58–64% cellulose, 2–16% hemicellulose, and 24–30% lignin. The pretreatment series gave information about the roles of lignin and hemicellulose in the enzymatic hydrolysis. The temperature of the pretreatment, the residual hemicellulose content of the substrate, and the type of the commercial cellulase preparation used were the most important factors affecting the enzymatic hydrolysis. The highest sugar yield in a 72-h hydrolysis, 79% of theoretical, was obtained using a pretreatment of 200°C for 10 min at neutral pH.     

Sorption of dissolved galactoglucomannans and galactomannans to bleached kraft pulp

Sorption of mannans onto bleached kraft pulp (BKP) was investigated withreference to other interactions of mannans in mechanical pulping andpapermaking. O-Acetyl galactoglucomannans (GGM) isolated from thermomechanicalpulp (TMP), as well as enzymatically modified guar gum galactomannans (GM) wereused in the study. The results showed that deacetylation of TMP GGMs, alsooccurring during peroxide bleaching of TMP, dramatically increased thesorption.A higher sorption was also achieved after salt addition, while temperature hadno effect. Sorption of guar gum GMs onto BKP fibres was, on the other hand,quite unaffected by external conditions such as temperature, pH and saltaddition. The degree to which the pulp was beaten did not notablyinfluence the sorption either – only unbeaten pulp gave a clearly lower mannansorption. A lower number of galactose side groups, however, strongly affectedsorption – the lower the number of side groups, the higher the sorption.The molar mass did not seem to affect the rate of sorption to any higher extentat ambient temperature. At higher temperatures the rate of sorption of smallerGM polymers was, nevertheless, slightly increased. Low-molar-mass GMs alsosorbed at a higher rate onto unbeaten pulp compared to high-molar-mass mannans.GM sorption appeared to be virtually irreversible.     

Electrochemical reduction of oxygen on double-walled carbon nanotube modified glassy carbon electrodes in acid and alkaline solutions

The oxygen reduction reaction has been investigated on double-walled carbon nanotube (DWCNT) modified glassy carbon (GC) electrodes in acid and alkaline media using the rotating disk electrode (RDE) method. The surface morphology and composition of DWCNT samples was examined by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Aqueous suspensions of DWCNTs were prepared using Nafion and non-ionic surfactant Triton X-100 as dispersing agents. The RDE results indicated that the DWCNT modified GC electrodes are active catalysts for oxygen reduction in alkaline solution. In acid media DWCNT/GC electrodes possess poor electrocatalytic properties for O₂ reduction which indicates lack of metal catalyst impurities in the DWCNT material studied. The oxygen reduction behaviour of DWCNTs was similar to that of multi-walled carbon nanotubes (MWCNTs) observed in our previous studies.     

Determination of trimethylamine‐N‐oxide in combination with l‐carnitine and γ‐butyrobetaine in human plasma by UPLC/MS/MS

An ultra‐high‐performance liquid chromatography–mass spectrometry (UPLC/MS/MS) method was developed and validated for the quantification of trimethylamine‐N‐oxide (TMAO) simultaneously with TMAO‐related molecules l ‐carnitine and γ‐butyrobetaine (GBB) in human blood plasma. The separation of analytes was achieved using a Hydrophilic interaction liquid chromatography (HILIC)‐type column with ammonium acetate–acetonitrile as the mobile phase. TMAO determination was validated according to valid US Food and Drug Administration guidelines. The developed method was successfully applied to plasma samples from healthy volunteers. Copyright © 2015 John Wiley & Sons, Ltd.     

Dielectric properties of potassium–sodium niobate ceramics at low frequencies

ABSTRACT

A study of the effects of ageing history on the electrical properties of lead-free ferroelectric ceramics of (K_0.5Na_0.5)(Nb_1?xSb_x)O₃ + 0.5 mol% MnO₂ and (K_0.5Na_0.5)(Nb_1?xTa_x)O₃ + 0.5 mol%MnO₂ for x = 0.05 is reported. The samples after storage at a constant temperature have been subject to infra-low-frequency electric field and radiation. Differences of the photoelectric response between the two examined compounds were found and the restoration of polarisation in the aged ceramic materials by cycles of applied field is discussed.     

Synthesis and neurotropic activity of silyl propargyl alcohols and sulfides

New silicon derivatives of hetaryl propargyl sulfides and propargyl alcohols were synthesized using phase‐transfer catalytic and organometallic methods. These compounds were tested for acute toxicity and neurotropic activity in the pentylenetetrazole test, and for phenamine hypothermia, phenamine hyperactivity and passive avoidance response tests. We have found that the silyl propargyl alcohols and sulfides are low toxicity compounds, the LD₅₀ being 700–1300 mg kg^?1. In the PAR test, the synthesized compounds exerted some memory‐improving activity. For di‐1‐(3‐methyl‐3‐hydroxybutyn‐1‐yl)methyl(3‐iodopropyl)silane ( 16 ) the effect was statistically significant and amounted to 250% of the control level. In the pentylenetetrazole test, all compounds possessed anticonvulsant activity, the most active compounds being 3‐(benzoxazolylthio)‐1‐propynyl(trimethyl)silane ( 6 ) and di‐[2‐(1‐hydroxycyclohexyl)ethynyl]methyl(3‐iodopropyl)silane ( 17 ). The phenamine‐induced hyperactivity was significantly elevated after treatment with (3‐trimethylsilyl‐2‐propynyl)thiobenzene ( 1 ) or di‐[1‐(3‐methyl‐3‐hydroxybutyn‐1‐yl)diphenylsilane ( 12 ). Our data show that these silicon derivatives of hetaryl propargyl sulfides and propargyl alcohols possess certain memory improving and anticonvulsant activity that should be studied in detail to evaluate the receptor systems involved. Copyright © 2004 John Wiley & Sons, Ltd.