Nanoparticles and surfaces presenting antifungal, antibacterial and antiviral properties

Here, we present new antimicrobial nanoparticles based on silica nanoparticles (SNPs) coated with a quaternary ammonium cationic surfactant, didodecyldimethylammonium bromide (DDAB). Depending on the initial concentration of DDAB, SNPs immobilize between 45 and 275 μg of DDAB per milligram of nanoparticle. For high concentrations of DDAB adsorbed to SNP, a bilayer is formed as confirmed by zeta potential measurements, thermogravimetry, and diffuse reflectance infrared Fourier transform (DRIFT) analyses. Interestingly, these nanoparticles have lower minimal inhibitory concentrations (MIC) against bacteria and fungi than soluble surfactant. The electrostatic interaction of the DDAB with the SNP is strong, since no measurable loss of antimicrobial activity was observed after suspension in aqueous solution for 60 days. We further show that the antimicrobial activity of the nanoparticle does not require the leaching of the surfactant from the surface of the NPs. The SNPs may be immobilized onto surfaces with different chemistry while maintaining their antimicrobial activity, in this case extended to a virucidal activity. The versatility, relative facility in preparation, low cost, and large antimicrobial activity of our platform makes it attractive as a coating for large surfaces.     

The carbon isotope composition of CO2 respired by trunks: comparison of four sampling methods

The (13)C natural abundance of CO(2) respired by plants has been used in the laboratory to examine the discrimination processes that occur during respiration. Currently, field measurements are being expanded to interpret the respiration delta(13)C signature measured at ecosystem and global levels. In this context, forests are particularly important to consider as they represent 80% of the continental biomass. The objective of this investigation was to compare four methods of sampling the CO(2) respired by trunks for the determination of its carbon isotope composition: three in situ methods using chambers placed on the trunk, and one destructive method using cores of woody tissues. The in situ methods were based either on a Keeling plot approach applied at the tissue level or on an initial flush of the chamber with nitrogen or with CO(2)-free air. In parallel, we investigated the possibility of an apparent discrimination during tissue respiration by comparing the delta(13)C signature of the respired CO(2) and that of the organic matter. The study was performed on six tree species widely distributed in temperate and mediterranean areas. The four methods were not significantly different when overall means were considered. However, considering the individual data, the Keeling plot approach and the nitrogen flush methods gave fairly homogeneous results, whereas the CO(2)-free air method produced more variable results. The core method was not correlated with any of the chamber methods. Regardless of the methodology, the respired CO(2) generally was enriched in (13)C relative to the total organic matter. This apparent enrichment during respiration was variable, reaching as much as 3-5 per thousand. This study showed that, on the whole, the different sampling techniques gave similar results, but one should be aware of the variability associated with each method.     

Effect of the pore geometry in the characterization of the pore size distribution of activated carbons

In this work, the characterization of Activated Carbons (AC) by using the independent pore models is discussed, with special emphasis on the issue of how the assumed pore geometry can affect the resulting Pore Size Distribution (rPSD) and on the problem of the unicity of the PSD when different probe molecules are used in adsorption experiments. A theoretical test was performed using virtual solids based in the so-called Mixed Geometry Model (MGM) (Azevedo et al. 2010). The MGM uses a kernel of adsorption isotherms generated by GCMC for different pore sizes and two pore geometries: slit and triangular. The adsorption isotherms of a virtual MGM solid were fitted with both the traditional Slit Geometry Model (SGM) and the Mixed Geometry Model (MGM). It is demonstrated that, by assuming a different pore geometry model from that of the real sample, different PSDs may be obtained by fitting adsorption isotherms of different probe gases. Finally, experimental results are shown which both point toward the MGM as an acceptable extension of the SGM and confirm that the MGM is a closer representation of the actual porous structure of most activated carbons.     

Evaluation of antioxidants on the thermo-oxidative stability of soybean biodiesel

This work shows the evaluation of three antioxidants (2,6-di-t-butyl-4-methylphenol (BHT)—synthetic antioxidant, hydrogenated cardanol (HC), and alkyl hydrogenated cardanol (AHC)—both derived from cashew nut shell liquid) on the thermo-oxidative stability of the soybean biodiesel. The antioxidants were added at concentrations of 200, 300, and 400 ppm, and the oxidative stability of the biofuel with and without antioxidants were investigated by thermogravimetric analysis (TG-DTG and IPDT) and Metrohm 743 Rancimat per the EN 14112 method. The results showed that all antioxidants contributed for the thermo-oxidative stability of the soybean biodiesel as follows: soybean biodiesel < soybean biodiesel + BHT < soybean biodiesel + HC < soybean biodiesel + AHC. In the Rancimat method, the results showed that the antioxidants influenced the biodiesel stability with an increase of at least 71 %.     

Nitric oxide-dependent pigment migration induced by ultraviolet radiation in retinal pigment cells of the crab Neohelice granulata

The purpose of this study was to verify the occurrence of pigment dispersion in retinal pigment cells exposed to UVA and UVB radiation, and to investigate the possible participation of a nitric oxide (NO) pathway. Retinal pigment cells from Neohelice granulata were obtained by cellular dissociation. Cells were analyzed for 30 min in the dark (control) and then exposed to 1.1 and 3.3 J cm⁻² UVA, 0.07 and 0.9 J cm⁻² UVB, 20 n m β-PDH (pigment dispersing hormone) or 10 μ m SIN-1 (NO donor). Histological analyses were performed to verify the UV effect in vivo . Cultured cells were exposed to 250 μ m L-NAME (NO synthase blocker) and afterwards were treated with UVA, UVB or β-PDH. The retinal cells in culture displayed significant pigment dispersion in response to UVA, UVB and β-PDH. The same responses to UVA and UVB were observed in vivo . SIN-1 did not induce pigment dispersion in the cell cultures. l-NAME significantly decreased the pigment dispersion induced by UVA and UVB but not by β-PDH. All retinal cells showed an immunopositive reaction against neuronal nitric oxide synthases. Therefore, UVA and UVB radiation are capable of inducing pigment dispersion in retinal pigment cells of Neohelice granulata and this dispersion may be nitric oxide synthase dependent.     

Improvement of permanent memory effect in PDLC films using TX-100 as an additive

A number of polymer dispersed liquid crystal (PDLC) films based on dimethacrylate monomers were synthesised by polymer-induced phase separation (PIPS) using polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (TX-100) as an additive up to total solution weight of 10% aiming to modify the initial anchorage force of the liquid crystal (LC) molecules to the polymeric matrix. The effects of the addition of this additive to the PDLC films were studied resorting to electro-optical studies. Using a fitting model, several parameters were correlated such as the permanent memory effect (PME), the voltage required to achieve 90% of maximum transmittance (E90), the average elastic constant (K) and the rotational viscosity of the director (γ). The use of TX-100 results on an increase on the PME and γ, and decrease on the E90 and K.     

Synthetic erythropoietic proteins: tuning biological performance by site-specific polymer attachment

Chemical synthesis in combination with precision polymer modification allows the systematic exploration of the effect of protein properties, such as charge and hydrodynamic radius, on potency using defined, homogeneous conjugates. A series of polymer-modified synthetic erythropoiesis proteins were constructed that had a polypeptide chain similar to the amino acid sequence of human erythropoietin but differed significantly in the number and type of attached polymers. The analogs differed in charge from +5 to -26 at neutral pH and varied in molecular weight from 30 to 54 kDa. All were active in an in vitro cell proliferation assay. However, in vivo potency was found to be strongly dependent on overall charge and size. The trends observed in this study may serve as starting points for the construction of more potent synthetic EPO analogs in the future.     

Rheological Behavior and Scattering Studies of Acrylamide-Based Copolymer Solutions

Summary: In this paper the chemical structure of an acrylamide-N,N-dihexylacrylamide copolymer was established by IR and NMR. Static and dynamic light scattering in formamide were used in order to evaluate the polymer structural parameters, such as weight-average molecular weight (M_w), second virial coefficient (A₂), radius of gyration (R_G), the form factor P(q) and the hydrodynamic radius (R_H). Additionally to the classical characterization, those results indicated the presence of aggregation, showing that formamide is not a very good solvent, as stated in earlier investigations. The rheological behavior in aqueous solutions was evaluated as a function of the salt concentration. The solutions presented an important viscosity increase in the presence of NaCl and did not show any sensitivity to the presence of CaCl₂. This result is in favor of the oil recovery especially in high salinity reservoirs.     

New designs for inhibitors of the NF-κB: DNA binding

We present a series of new inhibitors of the association between nuclear factor kappa B (NF-B) and the corresponding B site in DNA. They were designed using the lead compound 15-deoxy-^12,14 -prostaglandin J₂ (PGJ2), which is a natural product with demonstrated inhibitory efficiency for this system. First, the binding mode of PGJ2 to NF-B was unraveled by GOLD docking calculation. Subsequently, substitutions were made to PGJ2 to optimize its association with NF-B. Care was taken not to strongly increase the reactivity of the new compounds, and to keep the overall shape, size and hydrophilicity of the lead compound, which should render them a similar bioavailability. Molecular mechanics calculations were performed to decide on the suitability of the substitutions, and to evaluate the energies of association with NF-B. Density functional theory calculations were performed also to study the overall reactivity of the substituted drugs towards NF-B. Important general conclusions were obtained, concerning the improvement of these natural inhibitors; namely, a set of rational methodologies were deduced to improve the association between the PGJ2 derivatives and NF-B, and their efficiency demonstrated by generating a set of substituted complexes, some of them with a very much increased affinity for NF-B, opening new doors to enlarge the therapeutic capabilities of this class of drugs.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.