Strongly enhanced hole-phonon coupling in the metallic state of the dilute two-dimensional hole gas

We have studied the temperature dependent phonon emission rate P(T) of a strongly interacting (r(s) > or =22) dilute 2D GaAs hole system using a standard carrier heating technique. In the still poorly understood metallic state, we observe that P(T) changes from P(T) approximately T5 to P(T) approximately T7 above 100 mK, indicating a crossover from screened piezoelectric (PZ) coupling to screened deformation potential (DP) coupling for hole-phonon scattering. Quantitative comparison with theory shows that the long range PZ coupling between holes and phonons has the expected magnitude; however, in the metallic state, the short range DP coupling between holes and phonons is almost 20 times stronger than expected from theory. The density dependence of P(T) shows that it is easier to cool low-density 2D holes in GaAs than higher density 2D hole systems.     

Magnetically driven ferroelectric order in Ni3V2O8

We show that long-range ferroelectric and incommensurate magnetic order appear simultaneously in a single phase transition in Ni3V2O8. The temperature and magnetic-field dependence of the spontaneous polarization show a strong coupling between magnetic and ferroelectric orders. We determine the magnetic symmetry using Landau theory for continuous phase transitions, which shows that the spin structure alone can break spatial inversion symmetry leading to ferroelectric order. This phenomenological theory explains our experimental observation that the spontaneous polarization is restricted to lie along the crystal b axis and predicts that the magnitude should be proportional to a magnetic order parameter.     

Synthesis and structure determination of bimetallic Au/Cu nanoparticles

The synthesis of bimetallic nanoparticles has become so important in recent times due to its multi-faceted applications. The structure of the synthesised particles influences directly their properties. In this paper, we report the synthesis of Au/Cu nanoparticles by a simultaneous reduction method, considering three different molar concentrations (AuCu, AuCu₃ and Au₃Cu) of the components. In order to determine the size and structure of the obtained clusters, the particles were examined by optical spectroscopy, transmission electron microscopy and high-resolution transmission electron microscopy. One of the major factors, the minimum bimetal formation energy, was calculated by an embedded-atom method. The relation between the Au/Cu proportions has been demonstrated to affect the size of the particles and the corresponding structures. From the basic structural analysis it is found that the particles were fcc-like, multiple twin or multiple defect particles for the different Au/Cu concentrations. The smallest particles were identified for the Au/Cu sample with 50% of each, and the most crystalline structures were also obtained in the same sample. PACS 61.46.+w; 61.16.-d; 31.15.Qg     

Compounds with the YbFe2O4Structure Type: Frustrated Magnetism and Spin-Glass Behavior

The YbFe₂O₄structure type consists of triangular layers of lanthanide oxygen octahedra stacked with triangular double layers of transition metal oxygen triangular bipyramids. The crystallographic structures determined by neutron diffraction powder profile analysis at 300 and 11 K for new members of this structural family are reported. The compounds are found to be magnetically frustrated, by both lattice geometry and disorder. The magnetic properties of YbCuGaO₄, LuCuGaO₄, LuZnFeO₄, LuCoGaO₄, and LuCuFeO₄reveal the effects of total spin, spin mixing, and interaction between spins on different sublattices on the magnetic frustration. The magnetism is increasingly frustrated as the spin on the magnetic ions is decreased.     

Evaluation of backbone proton positions and dynamics in a small protein by liquid crystal NMR spectroscopy

NMR measurements of a large set of protein backbone one-bond dipolar couplings have been carried out to refine the structure of the third IgG-binding domain of Protein G (GB3), previously solved by X-ray crystallography at a resolution of 1.1 A. Besides the commonly used bicelle, poly(ethylene glycol), and filamentous phage liquid crystalline media, dipolar couplings were also measured when the protein was aligned inside either positively or negatively charged stretched acrylamide gels. Refinement of the GB3 crystal structure against the (13)C(alpha)-(13)C' and (13)C'-(15)N dipolar couplings improves the agreement between experimental and predicted (15)N-(1)H(N) as well as (13)C(alpha)-(1)H(alpha) dipolar couplings. Evaluation of the peptide bond N-H orientations shows a weak anticorrelation between the deviation of the peptide bond torsion angle omega from 180 degrees and the angle between the N-H vector and the C'-N-C(alpha) plane. The slope of this correlation is -1, indicating that, on average, pyramidalization of the peptide N contributes to small deviations from peptide bond planarity ( = 179.3 +/- 3.1 degrees ) to the same degree as true twisting around the C'-N bond. Although hydrogens are commonly built onto crystal structures assuming the N-H vector orientation falls on the line bisecting the C'-N-C(alpha) angle, a better approximation adjusts the C(alpha)-C'-N-H torsion angle to -2 degrees. The (15)N-(1)H(N) dipolar data do not contradict the commonly accepted motional model where angular fluctuations of the N-H bond orthogonal to the peptide plane are larger than in-plane motions, but the amplitude of angular fluctuations orthogonal the C(alpha)(i-1)-N(i)-C(alpha)(i) plane exceeds that of in-plane motions by at most 10-15 degrees. Dipolar coupling analysis indicates that for most of the GB3 backbone, the amide order parameters, S, are highly homogeneous and vary by less than +/-7%. Evaluation of the H(alpha) proton positions indicates that the average C(alpha)-H(alpha) vector orientation deviates by less than 1 degrees from the direction that makes ideal tetrahedral angles with the C(alpha)-C(beta) and C(alpha)-N vectors.     

Influence of organic ligands on the stabilization of palladium nanoparticles

The synthesis of palladium nanoparticles is performed by hydrogenation of a precursor, Pd₂(dba)₃ (1) or [Pd(C₃H₅)Cl]₂ (2) in the presence of either a weakly coordinating ligand (hexadecylamine, HDA) or good ligands (polyphosphines). It is shown in the case of 1 that good ligands lead to stable spherical nanoparticles of small size (near 2 nm) whereas the protective effect of HDA depends on the amount of ligand added as a result of equilibria present at the surface of the particles as monitored by solution NMR spectroscopy. The decomposition of 2 being very fast, the particle growth cannot be controlled except in the case of the use of a large excess of HDA which leads to spongelike particles resulting from the agglomeration of initially obtained nanocrystallites.     

Onion‐like Multifunctional Microtrap Vehicles for Attraction–Trapping–Destruction of Biological Threats

A multifunctional motile microtrap is developed that is capable of autonomously attracting, trapping, and destroying pathogens by controlled chemoattractant and therapeutic agent release. The onion‐inspired multi‐layer structure contains a magnesium engine core and inner chemoattractant and therapeutic layers. Upon chemical propulsion, the magnesium core is depleted, resulting in a hollow structure that exposes the inner layers and serves as structural trap. The sequential dissolution and autonomous release of the chemoattractant and killing agents result in long‐range chemotactic attraction, trapping, and destruction of motile pathogens. The dissolved chemoattractant (l ‐serine) significantly increases the accumulation and capture of motile pathogens (E. coli) within the microtrap structure, while the internal release of silver ions (Ag⁺) leads to lysis of the pathogen accumulated within the microtrap cavity.     

Silicon‐containing trifunctional and tetrafunctional cyanate esters: Synthesis,cure kinetics,and network properties

The synthesis and physical properties of new silicon‐containing polyfunctional cyanate ester monomers methyl[tris(4‐cyanatophenyl)]silane and tetrakis(4‐cyanatophenyl)silane, as well as polycyanurate networks formed from these monomers are reported. The higher crosslinking functionality compared to di(cyanate ester) monomers enables much higher ultimate glass transition temperatures to be obtained as a result of thermal cyclotrimerization. The ability to reach complete conversion is greatly enhanced by cocure of the new monomers with di(cyanate ester) monomers such as 1,1‐bis(4‐cyanatophenyl)ethane. The presence of silicon in these polycyanurate networks imparts improved resistance to rapid oxidation at elevated temperatures, resulting in char yields as high as 70% under nitrogen and 56% in air in the best‐performing networks. The water uptake in the silicon‐containing networks examined is 4–6 wt % after 96 h of immersion at 85 °C, considerably higher than both carbon‐containing and/or di(cyanate ester) analogs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 767–779     

Longitudinal 3D Blood Flow Distribution Provided by Diffuse Correlation Tomography during Bone Healing in a Murine Fracture Model

Noninvasive monitoring of vascularization can potentially diagnose impaired bone healing earlier than current radiographic methods. In this study, a noncontact diffuse correlation tomography (DCT) technique was employed to measure longitudinal blood flow changes during bone healing in a murine femoral fracture model. The three-dimensional distribution of the relative blood flow was quantified from one day pre-fracture to 48 days post-fracture. For three mice, frequent DCT measurements were performed every other day for one week after fracture, and then weekly thereafter. A decrease in blood flow was observed in the bone fracture region at one day post-fracture, followed by a monotonic increase in blood flow beyond the pre-injury baseline until five to seven days post-fracture. For the remaining 12 mice, only weekly DCT measurements were performed. Data collected on a weekly basis show the blood flow for most mice was elevated above baseline during the first two post-fracture weeks, followed by a subsequent decrease. Torsional strength of the excised femurs was measured for all 15 mice after 7 weeks of healing. A metric based on the early blood flow changes shows a statistically significant difference between the high strength group and the low strength group.