A simple differential titrator for automatic potentiometric titration at zero current, with two identical indicator electrodes

A simple differential titrator for automatic potentiometric titration at zero current, with two identical indicator electrodes, is described. The autoburette is a normal microburette connected to one tube of a peristaltic pump, and the differentiating system is a closed-flow circuit in a second tube of the pump, this tube containing two electrodes 5 cm apart. The apparatus has been applied to the determination of halides and sulphide-disulphide mixtures, with electrodes coated with an appropriate silver salt.     

On the computation of molecular electronic affinities

Using a multireferent MBPT method (CIPSI) the electronic affinity (EA) of F, CN and HCC is computed. Results show how UMP2 gives unbalanced truncation of the MP series, while ROMP2 has the correct (balanced) behaviour. The good agreement with the experimental EA found for some compounds is accidental and associated to an error compensation. The good agreement with the experimental data found for the ROMP2 and CIPSI EAs is analysed.This paper was presented at the International Conference on The Impact of Supercomputers on Chemistry, held at the University of London, London, UK, 13–16 April 1987     

Tension trapping of carbonyl ylides facilitated by a change in polymer backbone

Epoxidized polybutadiene and epoxidized polynorbornene were subjected to pulsed ultrasound in the presence of small molecules capable of being trapped by carbonyl ylides. When epoxidized polybutadiene was sonicated, there was no observable small molecule addition to the polymer. Concurrently, no appreciable isomerization (cis to trans epoxide) was observed, indicating that the epoxide rings along the backbone are not mechanically active under the experimental conditions employed. In contrast, when epoxidized polynorbornene was subjected to the same conditions, both addition of ylide trapping reagents and net isomerization of cis to trans epoxide were observed. The results demonstrate the mechanical activity of epoxides, show that mechanophore activity is determined not only by the functional group but also the polymer backbone in which it is embedded, and facilitate a characterization of the reactivity of the ring-opened dialkyl epoxide.     

Synthesis and pharmacological evaluation of new 16-methyl pregnane derivatives

The pharmacological activity of several new pregnane derivatives 15-19 were determined on gonadectomized male hamster flank organs, seminal vesicles and in vitro conversion of testosterone (T) to dihydrotestosterone (DHT) as 5alpha-reductase inhibitors. Steroids 15-19 decreased the diameter of the pigmented spot in the flank organs as compared to the T treated animals; in this model, steroids 16 and 19 showed a higher activity than the commercially available finasteride 3. Injection of T increased the weight of the seminal vesicles. Compounds 15-19 when injected together with T decreased the weight of the seminal vesicles thus showing an antiandrogenic effect. The trienone 19 exhibited a considerably higher activity than finasteride. Steroids 15-19 inhibited the in vitro metabolism of [3H]T to [3H]DHT in seminal vesicles homogenates of gonadectomized male hamsters. Compounds 18 and 19 showed a much higher antiandrogenic effect than finasteride. This enhancement of the biological activity could probably be attributed to the coplanarity of the steroidal skeleton as previously observed by our group. The high antiandrogenic activity of the epoxy compound 16 is probably the result of the ring opening of the oxiran ring with the nucleophilic part of the enzyme 5alpha-reductase thus leading to a stable adduct with concomitant deactivation of this enzyme.     

3,5-Bis(ferrocenylmethylene)-1-methyl-4-methylenepiperidine. Synthesis and some chemical properties

3,5-Bis(ferrocenylmethylene)-1-methyl-4-methylenepiperidine, a diferrocenyltriene with a fixeds-cisoid conformation of the exocyclic double bonds, was synthesized. On heating, this compound cyclodimerizes according to the [4+2]-cycloaddition scheme; it forms Diels-Alder adducts with azodicarboxylic and maleic acidN-phenylimides. The compound easily cyclodimerizes in the presence of acids by a proton cyclodimerization mechanism to give a spiro cyclodimer. The triene also adds a 3,5-bis(ferrocenylmethylene)-1,4-dimethyl-1-azonia-4-cyclohexyl salt to the terminal methylene group yielding linear and cyclic addition products. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 511–516, March, 2000.     

Partial filling multiple injection affinity capillary electrophoresis (PFMIACE) to estimate binding constants of receptors to ligands

Partial filling multiple injection affinity capillary electrophoresis (PFMIACE) is used to determine binding constants between vancomycin (Van) from Streptomyces orientalis, teicoplanin (Teic) from Actinoplanes teicomyceticus and ristocetin (Rist) from Nocardia lurida to d-Ala-d-Ala terminus peptides and carbonic anhydrase B (CAB, E.C.4.2.1.1) to arylsulfonamides. Two variations of PFMIACE are described herein. In the first technique, the capillary is partially filled with ligand at increasing concentrations, a non-interacting standard, three or four separate plugs of receptor each separated by small plugs of buffer, a plug containing a second non-interacting standard, and then electrophoresed in buffer. Upon continued electrophoresis, equilibrium is established between the ligand and receptors causing a shift in the migration time of the receptors with respect to the non-interacting standards. This change in migration time is utilized for estimating multiple binding constants (K_b) for the same interaction. In the second technique, separate plugs of sample containing non-interacting standards, peptide one, buffer, and peptide two, were injected into the capillary column. The capillary is partially filled with a series of buffers containing an antibiotic at increasing concentrations and electrophoresed. Peptides migrate through the column at similar electrophoretic mobilities since their charge-to-mass ratios are approximately the same but remain as distinct zones due to the buffer plug between peptides. Upon electrophoresis, the plug of antibiotic flows into the peptide plugs affecting a shift in the migration time of the peptides with respect to the non-interacting standards occurs due to formation of the of the antibiotic-peptide complex. The shift in the migration time of the peptides upon binding to the antibiotic is used for the Scatchard analysis and measurement of a K_b. The PFMIACE technique expands the functionality and potential of ACE as an analytical tool to examine receptor-ligand interactions. In PFMIACE, a smaller amount of sample is required in the assay compared to both conventional ACE and MIACE. Furthermore, a wide array of data is obtained from a single experiment, thus, expediting the assay of biological species.     

Density functional theory of solvation and its relation to implicit solvent models

We describe a density functional theory approach to solvation in molecular solvents. The solvation free energy of a complex solute can be obtained by direct minimization of a density functional, instead of the thermodynamic integration scheme necessary when using atomistic simulations. In the homogeneous reference fluid approximation, the expression of the free-energy functional relies on the knowledge of the direct correlation function of the pure solvent. After discussing general molecular solvents, we present a generic density functional describing a dipolar solvent and we show how it can be reduced to the conventional implicit solvent models when the solvent microscopic structure is neglected. With respect to those models, the functional includes additional effects such as the microscopic structure of the solvent, the dipolar saturation effect, and the nonlocal character of the dielectric constant. We also show how this functional can be minimized numerically on a three-dimensional grid around a solute of complex shape to provide, in a single shot, both the average solvent structure and the absolute solvation free energy.     

Multinuclear NMR studies and ab initio structure calculations of hindered phencyclone diels‐alder adducts from symmetrical cyclic dienophiles: Cyclohexene,vinylene carbonate,vinylene trithiocarbonate and two N‐aryl maleimides

A series of hindered Diels‐Alder adducts have been prepared from phencyclone, 1 , with various unusual symmetrical cyclic dienophiles, including cyclohexene, 2a ; vinylene carbonate, 2b ; vinylene trithiocarbonate, 2c ; and the N‐aryl maleimides: N‐(4‐dimethylamino‐3,5‐dinitrophenyl)maleimide (“Tuppy's maleimide”), 2d ; and N‐[3,5‐bis(trifluoromethyl)phenyl]maleimide, 2e . The highly hindered adducts, 3a‐e , respectively, were extensively characterized by one‐ and two‐dimensional NMR methods, observing proton, carbon‐13 and fluorine‐19. High resolution COSY45 spectra permitted rigorous proton NMR assignments. The 2D heteronuclear C‐H chemical shift correlation spectra (HETCOR, XHCORR) were obtained for adducts 3a‐d , allowing specific assignments for protonated carbons. Corrections to earlier proton NMR assignments for the vinylene carbonate adduct are given; results of the gated decoupling ¹³C NMR experiment for this adduct supported endo adduct stereochemistry. Relative proton chemical shifts for bridgehead phenyls of adduct 3c appeared anomalous relative to other adducts, suggesting possible special anisotropic interactions (with endocyclic sulfur or other anisotropic groups in the product) due to the unusual calculated orientation of the phenyls. The unsubstituted bridgehead phenyls in all adducts were shown to exhibit slow exchange limit (SEL) ¹H and ¹³C spectra on the NMR timescales at ambient temperatures (7 tesla) showing slow rotations about the C(sp³)‐C(aryl sp²) bonds. The rapid rotation of the N‐aryl rings of the maleimide adducts was indicated by fast exchange limit spectra, suggesting that ortho substitution of the N‐aryl ring may be necessary to slow this rotation to the SEL regime. Ab initio geometry optimizations at the Hartree‐Fock level were carried out for each adduct, with the 6‐31G* basis sets. Appreciable geometry differences were seen in calculated structures, and significant NMR chemical shift differences were experimentally observed, depending on the nature of the groups attached to the (Z)‐HC=CH moiety of the dienophiles.