Synthesis and Characterization of Some Novel Dichromophoric Cyanine Dyes

Here, the synthesis of two novel series of dichromophoric cyanine dyes were reported. The first series of novel bis-azacyanine dyes 3a–d was afforded by reaction of 2-(1,3,3-trimethyle indoline-2-ylidene)acetaldehyde with diaminoaromatics, and the second series of novel bis-diazacyanine dyes 4a–d was obtained using quaternization of an amine group in disazo compounds, which were produced by the reaction of disazoaromatics with 2-methylene-1,3,3-trimethyle indoline. The products were identified by ¹H NMR, ¹³C NMR, infrared, UV-vis, and mass spectroscopy.     

Ultrasound-assisted emulsification microextraction using low density solvent for analysis of toxic nitrophenols in natural waters

An ultrasound-assisted emulsification microextraction (USAEME) based on low-density solvents was successfully applied for the extraction and pre-concentration of four toxic nitrophenols in water samples. The extracted analytes were analyzed by high-performance liquid chromatography-UV detection. The important parameters influencing the extraction efficiency were studied and optimized utilizing two different optimization methods: one variable at a time (OVAT) and central composite design (CCD). The results showed that the emulsification process can be completed in a few seconds using low-density solvents, but almost 10–20?min is necessary for high-density solvents. Under the optimum conditions (extraction solvent, 1-octanol; extraction solvent volume, 40?µL; sample pH, 3.0; salt concentration, 20% (w/v) NaCl; extraction temperature, 40 (±3)°C), limits of detection of the method were in the range of 0.25 to 1?µg?L^?1 and the repeatability and reproducibility of the proposed method, expressed as relative deviation, varied in the range of 2.2–4.2% and 4.7–6.9%, respectively. Linearity was found to be in the range of 1 to 200?µg?L^?1 and the preconcentration factors (PFs) were between 77 and 175. The relative recoveries of the four nitrophenols from water samples at spiking level of 10.0?µg?L^?1 were in the range of 92.0 to 115.0%.     

Efficient and selective oxidation of hydrocarbons with tert-butyl hydroperoxide catalyzed by oxidovanadium(IV) unsymmetrical Schiff base complex supported on γ-Fe2O3 magnetic nanoparticles

The catalytic activity of an oxidovanadium(IV) unsymmetrical Schiff base complex supported on γ-Fe₂O₃ magnetic nanoparticles, γ-Fe₂O₃@[VO(salenac-OH)] in which salenac-OH?=?[9-(2′,4′-dihydroxyphenyl)-5,8-diaza-4-methylnona-2,4,8-trienato](-2), was explored in the oxidation of hydrocarbons with tert-butyl hydroperoxide (TBHP, 70% aqueous solution) as oxidant. High catalytic activity and selectivity were demonstrated by this magnetic nanocatalyst in alkane hydroxylation and alkene epoxidation, and the corresponding products were obtained with good to excellent yields in acetonitrile at 50 °C. Reasonable catalytic activity was presented by this supported catalyst in the epoxidation of linear alkenes under optimal reaction conditions. In addition, alkylbenzene derivatives and cycloalkanes can be oxidized to their corresponding alcohols and ketones with good yields in this catalytic system. It is possible to magnetically separate the γ-Fe₂O₃@[VO(salenac-OH)] catalyst and reuse it four times without losing the activity significantly. Moreover, the catalyst structure and morphology do not change after recovery, as indicated by comparing scanning electron microscopy (SEM) image, Fourier transform infrared (FT-IR) and diffuse reflectance spectrum (DRS) of the recovered catalyst with those of the fresh catalyst.

     

One-pot synthesis of 2H-indazolo[2,1-b]phthalazine-triones via nano γ-Al2O3/BF3/Fe3O4 as an efficient catalyst and theoretical DFT study on them

Experimental and computational studies were carried out for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones using γ-Al₂O₃/BF₃/Fe₃O₄ as a nanocatalyst in optimized and solvent-free conditions. The most significant features of the existing protocol are easy preparation of the catalyst, short reaction times, environmentally benign, and milder reaction conditions. The analysis data were reported using the experimental results of this investigation, such as: H-NMR, FT-IR (Fourier-transform infrared spectroscopy), X-ray diffraction, vibrating-sample magnetometer, Thermal gravimetric analysis (TG-DTG), nitrogen adsorption isotherm, Field Emission Scanning Electron Microscopy, and Transmission electron microscopy images of nanocatalyst. In this study, 2H-indazolo[2,1-b]phthalazine-triones have also been theoretically investigated using DFT-B3LYP/6-31G method. Also, some of the physical chemistry properties have examined for conformers of products, which there was good agreement between the computational results and obtained experimental for the products.     

An efficient synthesis and cytotoxic activity of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole obtained using a magnetically recyclable Fe3O4 nanocatalyst‐mediated white tea extract

A simple and efficient procedure has been developed for the synthesis of biologically relevant 2‐substituted benzimidazoles through a one‐pot condensation of o‐phenylenediamines with aryl aldehydes catalysed by iron oxide magnetic nanoparticles (Fe₃O₄ MNPs) in short reaction times with excellent yields. In the present study, Fe₃O₄ MNPs synthesized in a green manner using aqueous extract of white tea (Camelia sinensis) (Wt‐Fe₃O₄ MNPs) were applied as a magnetically separable heterogeneous nanocatalyst to synthesize 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole which has potential application in pharmacology and biological systems. Fourier transform infrared and NMR spectroscopies were used to characterize the 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole. In vitro cytotoxicity studies on MOLT‐4 cells showed a dose‐dependent toxicity with non‐toxic effect of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole, up to a concentration of 0.147 µM. The green synthesized Wt‐Fe₃O₄ MNPs as recyclable nanocatalyst could be used for further research on the synthesis of therapeutic materials, particularly in nanomedicine, to assist in the treatment of cancer.     

Aspartic-acid-loaded starch-functionalized Mn–Fe–Ca ferrite magnetic nanoparticles as novel green heterogeneous nanomagnetic catalyst for solvent-free synthesis of dihydropyrimidine derivatives as potent antibacterial agents

Research on Chemical Intermediates - Mn0.5Fe0.25Ca0.25Fe2O4@starch@aspartic acid magnetic nanoparticles (MNPs) as a new green nanocatalyst were designed and synthesized by a coprecipitation...     

Superb catalytic properties of nickel cobalt bimetallic nanoparticles immobilized on 3D nitrogen-doped graphene for thermal decomposition of ammonium perchlorate

Research on Chemical Intermediates - Nickel cobalt bimetallic nanoparticles (NiCo NPs) with different molar ratios were stabilized over three-dimensional nitrogen-doped graphene [3D-(N)G] by a...     

Bilayer Cylindrical Conduit Consisting of Electrospun Polycaprolactone Nanofibers and DSC Cross‐Linked Sodium Alginate Hydrogel to Bridge Peripheral Nerve Gaps

Herein, a bilayer cylindrical conduit (P‐CA) is presented consisting of electrospun polycaprolactone (PCL) nanofibers and sodium alginate hydrogel covalently cross‐linked with N,N′‐disuccinimidyl carbonate (DSC). The bilayer P‐CA conduit is developed by combining the electrospinning and outer–inner layer methods. Using DSC, as a covalent crosslinker, increases the degradation time of the sodium alginate hydrogel up to 2 months. The swelling ratio of the hydrogel is also 503% during the first 8 h. The DSC cross‐linked sodium alginate in the inner layer of the conduit promotes the adhesion and proliferation of nerve cells, while the electrospun PCL nanofibers in the outer layer provide maximum tensile strength of the conduit during surgery. P‐CA conduit promotes the migration of Schwann cells along the axon in a rat model based on functional and histological evidences. In conclusion, P‐CA conduit will be a promising construct for repairing sciatic nerves in a rat model.     

The improvement of numerical modeling in the solution of incompressible viscous flow problems using finite element method based on spherical Hankel shape functions

In this paper, the finite element method with new spherical Hankel shape functions is developed for simulating 2‐dimensional incompressible viscous fluid problems. In order to approximate the hydrodynamic variables, the finite element method based on new shape functions is reformulated. The governing equations are the Navier‐Stokes equations solved by the finite element method with the classic Lagrange and spherical Hankel shape functions. The new shape functions are derived using the first and second kinds of Bessel functions. In addition, these functions have properties such as piecewise continuity. For the enrichment of Hankel radial basis functions, polynomial terms are added to the functional expansion that only employs spherical Hankel radial basis functions in the approximation. In addition, the participation of spherical Bessel function fields has enhanced the robustness and efficiency of the interpolation. To demonstrate the efficiency and accuracy of these shape functions, 4 benchmark tests in fluid mechanics are considered. Then, the present model results are compared with the classic finite element results and available analytical and numerical solutions. The results show that the proposed method, even with less number of elements, is more accurate than the classic finite element method.     

Nickel versus copper: enhanced antibacterial activity in a series of new nickel(II) Schiff base complexes

Five new Ni(II) Schiff base complexes [NiL^x(Solv)₂] denoted by NiL^x, x = 1–5, were synthesized and characterized. The Schiff base ligands were synthesized from the condensation of 5-bromo-2-hydroxy-3-nitrobenzaldehyde with different aliphatic and aromatic diamines. The X-ray crystal structure of NiL³ was determined. The ligands and complexes were tested as antibacterial agents against two gram(+) and two gram(?) human pathogenic bacteria. The complexes showed moderate antibacterial activity against both gram type bacteria. The new Ni(II) complexes showed enhanced antibacterial activity compared to the previously reported Cu(II) complexes of the same ligands.