Comparative study on the effects of different annealing conditions on the surface morphology,crystallinity, and optical properties of ZnO micro/nanoparticle-based discs

The effects of annealing parameters on the surface morphology, crystallinity, and optical properties of ZnO disc were investigated. Variations in the annealing temperatures and gas flow rates were found to have a profound impact; grain growth was enhanced even at the low annealing temperature of only 400 °C. SEM and AFM revealed smooth and uniform grain growth after annealing treatment, especially at 800 °C. A unique secondary growth of ZnO nanoparticles and multilayer grain growth that have not been reported elsewhere were also observed. The annealing treatment was also found to improve grain crystallinity as illustrated by the lowering of intrinsic compressive stress based on the XRD lattice constant and FWHM data. The PL spectra of the M-Disc showed a huge band edge emission at 371–376 nm. In contrast, the N-Disc exhibited a dominant and broad visible PL emission in the green band with peaks at 519–533 nm. These peaks were attributed to a very high concentration of structural defects (oxygen vacancies and zinc/oxygen interstitials). The annealing conditions had a significant effect on the properties of ZnO. Increased percentage of oxygen in the O/Ar from 50% to 100% did not change the M-Disc spectra. However, the XRD pattern of the N-Disc revealed that the (0 0 2) peak intensity decreased, the position of the (1 0 1) peak slightly shifted toward a higher angle, and the FWHM of the (1 0 1) peak improved. The experimental results showed that thermal annealing could enhance the different properties of ZnO discs.     

Detection of acute brain injury by Raman spectral signature

Brain injury can lead to irreversible tissue loss and functional deficit along with significant health care costs. Raman spectroscopy can be used as a non-invasive technique to provide detailed information on the molecular composition of diseased and damaged tissues. This technique was used to examine acute mouse brain injury, focusing on the motor cortex, a region directly involved in controlling execution of movement. The spectral profile obtained from the injured brain tissue revealed a markedly different signature, particularly in the amide I and amide III vibrational region when compared to that of healthy brain tissue. Most noticeably, there was a significant reduction of the amide I vibration at the acute injury site and the appearance of two distinct features at 1586 and 1618 cm(-1). Complementary immunohistochemical analysis of the injured brain tissue showed an abundant expression of Caspase 3 (a cysteine protease marker used for apoptosis), suggesting that the injury-induced specific Raman shifts may be correlated with cell death. Taken together, this study demonstrates that Raman spectroscopy can play an important role in detecting the changes that occur in the injured brain and provide a possible technology for monitoring the recovery process.     

Enhanced Oxidation of Uric Acid at Thiourea-Modified Gold Electrode in Alkaline Media

Russian Journal of Electrochemistry - The surface of polycrystalline gold (Au (poly)) electrode was ex situ modified with self-assembled monolayer (SAM) of thiourea (TU) with a view of applying the...     

The effect of emitter geometry on lateral field emission diodes fabricated by AFM-based electrochemical nanolithography

Lateral field emission diodes were successfully fabricated using atomic force microscopy (AFM)-based electrochemical nanolithography and tetramethyl ammonium hydroxide (TMAH) wet etching method. Field emission (FE) current of the silicon emitter cathode was measured as a function of the applied anode voltage under vacuum environment. For narrowed nanogaps from 55 to 35 nm, the turn-on voltage was decreased from 21 to 16 V. The turn-on voltage of the 35 nm gap was reduced from 16 to 8 V by changing the curvature radius of the cathode tip. The sharper emitter had the lowest turn-on voltage, largest field-enhancement factor, and good stability, which were attributed to the small emitter radius at the cathode tip and very slight changes in the local field factor. These results indicate that the diodes fabricated using this technique had the lowest value of turn-on voltage ever reported for lateral silicon FE devices.     

Effects of preparation temperature on the conductivity of polypyrrole conducting polymer

An attempt has heen made to investigate the effect of temperature on the conductivity of polypyrrole conducting polymer films prepared by an electrochemical method in an aqueous medium using camphor sulfonate as the dopant. The polymer was grown from aqueous solutions employing a range of temperatures (l–60°C). It was found that with increase in temperature the conductivity decreased and the optimum temperature was found to be between 10 and 30°C. The results showthatthe polymer formed at low temperature has higher conductivity and is stronger than that formed at higher temperatures. Characterization by X-ray scattering shows that interlayer distance, d_Bragg (?), increases with increasing temperature. The morphology of the films formed was studied by using a scanning electron microscope (SEM). The changes in conductivity and physical appearance were interpreted as being due to compactness in the molecular packing and formation ofαβ linkages in the film.     

A QuEChERS‐based extraction method for the residual analysis of pyraclofos and tebufenpyrad in perilla leaves using gas chromatography: application to dissipation pattern

The objective of this work was to establish a simple extraction method for the residual analysis of pyraclofos and tebufenpyrad in Perilla leaves. A QuEChERS (quick, easy, cheap, effective, rugged and safe) method was used for extraction using ethyl acetate as an extraction solvent, and cleanup was carried out using dispersive solid‐phase extraction technique. The samples were analyzed using gas chromatography with nitrogen phosphorous detector and confirmed by gas chromatography–mass spectrometry. The linearity was excellent (r² = 1.0) in matrix‐matched calibration for both pesticides. The recoveries at two fortification levels were 80.76–95.38% with relative standard deviation lower than 5%. The limits of detection and limits of quantification were 0.01 and 0.033 mg/kg for both pesticides, respectively. The results revealed that the dissipation pattern of pyraclofos and tebufenpyrad followed first‐order kinetics. The pyraclofos and tebufenpyrad residues declined to a level below the maximum residue limits within 14 day between the last application and harvesting. We suggest that pyraclofos and tebufenpyrad could be used efficiently on perilla leaves under the recommended dosage conditions. Copyright © 2012 John Wiley & Sons, Ltd.