Lag synchronization of hyperchaotic complex nonlinear systems

In this paper, we study the lag synchronization (LS) of n-dimensional hyperchaotic complex nonlinear systems. The idea of the nonlinear control technique based on the complex Lyapunov function with lag in time is used to propose a scheme to investigate LS of hyperchaotic attractors of these systems. Both complex Lyapunov and control functions are introduced. For illustration, the scheme is applied to two hyperchaotic complex Lorenz systems. The real and complex control functions are derived analytically to achieve LS and to show that the complex error dynamical systems are globally stable. Numerical results are calculated to test the validity of the analytical expressions of control functions to achieve LS of two identical hyperchaotic attractors.     

Complex modified projective synchronization of two chaotic complex nonlinear systems

In this paper, we present a novel type of synchronization called complex modified projective synchronization (CMPS) and study it to a system of two chaotic complex nonlinear 3-dimensional flows, possessing chaotic attractors. Based on the Lyapunov function approach, a scheme is designed to achieve CMPS for such pairs of (either identical or different) complex systems. Analytical expressions for the complex control functions are derived using this scheme to achieve CMPS. This type of complex synchronization is considered as a generalization of several kinds of synchronization that have appeared in the recent literature. The master and slave chaotic complex systems achieved CMPS can be synchronized through the use of a complex scale matrix. The effectiveness of the obtained results is illustrated by a studying two examples of such coupled chaotic attractors in the complex domain. Numerical results are plotted to show the rapid convergence of modulus errors to zero, thus demonstrating that CMPS is efficiently achieved.     

Lattice Boltzmann investigation for enhancing the thermal conductivity of ice using Al2O3 porous matrix

An enthalpy-based Lattice Boltzmann method (LBM) with double-distribution function (DDF) model is used to investigate numerically the effects of inserting a porous matrix on the heat transfer performance of the phase change material (PCM). Simulations are carried out for melting of ice in saturated Al₂O₃ porous matrix encapsulated in a concentric annulus. The process is considered as a conduction/convection controlled phase change problem at a representative elementary volume (REV) scale. The present results are validated by previous published numerical simulations of melting with and without porous media. In this research paper, the effects of decreasing the porosity on the temperature contours, flow patterns within the melt zone, complete melting time of the PCM and average Nusselt number are discussed qualitatively and quantitatively.     

Regioselective synthesis and biological evaluation of spiro-sulfamidate glycosides from exo-glycals

We report the synthesis of spiro-sulfamidate glycosides from exo-glycals. This route is regioselective and furnishes an original class of spiro-hydantoin glycoside analogues. A biological evaluation of this family on a range of glycosidases shows that these compounds are weak but very selective inhibitors of α-glucosidase and amyloglucosidase.     

Aggregation and deposition behavior of boron nanoparticles in porous media

New kinds of solid fuels and propellants comprised of nanomaterials are making their way into civilian and military applications yet the impact of their release on the environment remains largely unknown. One such material is nano boron, a promising solid fuel and propellant. The fate and transport of nano boron under various aquatic systems was investigated in aggregation and deposition experiments. Column experiments were performed to examine the effects of electrolyte concentration and flow velocity on the transport of boron nanoparticles under saturated conditions, whereas aggregation tests were conducted to assess the effects of electrolytes on the aggregation of the boron nanoparticles. Aggregation tests indicated the presence of different reaction-controlled and diffusion-controlled regimes and yielded critical coagulation concentrations (CCC) of 200 mM, 0.7 mM and 1.5 mM for NaCl, CaCl(2), and MgCl(2), respectively. Aggregation and deposition experimental data corresponded with the classic Derjaguin-Landau-Verwey-Overbeek (DLVO) model and the constant attachment efficiency filtration model, respectively. Theoretical calculations indicated that both the primary and secondary energy minima play important roles in the deposition of nano boron in sand columns.     

A general synthetic method for the formation of arylaminotetrazoles using natural natrolite zeolite as a new and reusable heterogeneous catalyst

An efficient method for preparation of arylaminotetrazoles is reported using natrolite zeolite as a natural catalyst. Generally, isomer of 5-arylamino-1H-tetrazole can be obtained from arylcyanamides carrying electron-withdrawing substituent on aryl ring and as the electropositivity of substituent is increased, the product is shifted toward the isomer of 1-aryl-5-amino-1H-tetrazole. This method has the advantages of high yields, simple methodology, short reaction times and easy work-up. The catalyst can be recovered by simple filtration and reused in good yields.     

Surface layer-by-layer chemical deposition reaction for thin film formation of nano-sized metal 8-hydroxyquinolate complexes

The feasibility of a novel and simple layer-by-layer chemical deposition method for the preparation of nano-sized metal 8-hydroxyquinolate complexes has been investigated and reported. Uniform nanocrystalline films have been synthesized via dipping a substrate alternately in metal ion solution followed by ligand solution. The stoichiometry of the as-grown anhydrous Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) complex crystals were confirmed from the metal analysis and molar stoichiometric ratio of metal ion to 8-hydroxyquinoline. This was characterized as 1:2 for the Co(II), Ni(II), Cu(II) and Zn(II)–quinolate complexes. The Fe(III)–quinolate thin film was found to exhibit a 1:3 ratio. Electron impact-mass spectra (EI-MS) of all the synthesized thin film metal quinolate complexes were recorded and the results refer to the existence of the molecular ion peak at the corresponding m/z values. Confirmation of such stoichiometric 1:2 and 1:3 ratios were also evident from the (EI-MS) study. The deposited thin films were also subjected to analysis by a scanning electron microscope (SEM) and a particle size ?50 nm was detected. FT-IR and UV–Vis spectroscopy were further used to confirm the structure of the metal 8-hydroxyquinolate complexes. Thermal gravimetric analysis (TGA) was also used to follow up the possible thermal decomposition steps and to calculate the thermodynamic parameters of the nano-sized metal complexes.     

Robust Stability and Stabilization of a Class of Nonlinear Switched Discrete-Time Systems with Time-Varying Delays

In this paper, we investigate the problems of robust delay-dependent ℒ₂ gain analysis and feedback control synthesis for a class of nominally-linear switched discrete-time systems with time-varying delays, bounded nonlinearities and real convex bounded parametric uncertainties in all system matrices under arbitrary switching sequences. We develop new criteria for such class of switched systems based on the constructive use of an appropriate switched Lyapunov-Krasovskii functional coupled with Finsler’s Lemma and a free-weighting parameter matrix. We establish an LMI characterization of delay-dependent conditions under which the nonlinear switched delay system is robustly asymptotically stable with an ℒ₂-gain smaller than a prescribed constant level. Switched feedback schemes, based on state measurements, output measurements or by using dynamic output feedback, are designed to guarantee that the corresponding switched closed-loop system enjoys the delay-dependent asymptotic stability with an ℒ₂ gain smaller than a prescribed constant level. All the developed results are expressed in terms of convex optimization over LMIs and tested on representative examples.     

Full-Energy peak efficiency of an NaI(Tl) detector with coincidence summing correction showing the effect of the source-to-detector distance

The coincidence summing effect is considered to be one of the most important problems in γ-ray spectrometry. It has played an important role in the detector calibration process, especially at low source-to-detector distances, which are the typical conditions when the environmental samples have to be measured. In this work, the γ–γ coincidence summing correction factors (CSCF) for a 3″×?3″ NaI(Tl) γ-ray detector have been calculated at different distances from the detector end cap. These factors with NaI(Tl) γ-ray detectors have rarely been discussed in the previous literature, due to the lack of the separation process of the close gamma energy lines in the scintillation detector spectrum. The γ–γ CSCF were calculated for ⁶⁰Co, ¹³³Ba and ¹⁵²Eu radioactive point sources, which show the simple and the complex decay scheme of several radionuclides. In order to obtain the CSCF, the following parameters must be estimated by the numerical simulation method (NSM): the total efficiency (ε_T), the full-energy peak efficiency (ε_P) and the effective solid angle (Ω_eff). These parameters were calculated numerically depending on the direct mathematical method and efficiency transfer method. The obtained CSCF was used to correct the measured efficiency curves, which were measured at different distances, then compared to the ETNA and EFFTRAN programs, as well as the CSCF. The results show a good agreement, especially at large source-to-detector distances.     

Influence of magnetic field on free vibrations in elastodynamic problem of orthotropic hollow sphere

The effect of magnetic field on the plane vibrations for an elastodynamic orthotropic sphere is studied. Equations of elastodynamic problems of the orthotropic hollow sphere in terms of displacement are solved. The numerical results of the frequency equations in the presence of magnetic field are discussed and shown graphically. Compar-isons are made with the result in the presence and absence of magnetic field in the case of orthotropic sphere. The results show that the effect of magnetic field is very pronounced.