Baseline studies of radon/thoron concentration levels in and around the Lambapur and Peddagattu areas in Nalgonda district, Andhra Pradesh, India

Studies conducted by Atomic Minerals Directorate of Exploration and Research (AMD) of Hyderabad, India had established the presence of higher concentrations of uranium in Lambapur and Peddagattu areas of Nalgonda district, AP, India and it was estimated that it could be a viable source for commercial extraction. The envisaged extraction process involves dispersion of radioactive particulate matter into atmosphere. Environmental radioactive studies in and around proposed mining areas at this point of time will be extremely useful for establishing base line data before a large scale uranium extraction process comes into existence. To this end, Solid State Nuclear Track Detectors were installed to evaluate indoor radon and thoron concentration levels in the dwellings of the area. The geometric means of radon and thoron concentration levels were found to be (7.1±0.2)×10¹ and (6.7±0.3)×10¹ Bq/m³, respectively. Simultaneously, natural background radiation measurements were also made and these levels are found to vary from 770 to 3995 μGy/y in the spatial distribution.     

The change of sign of E2 and M1 matrix elements,and of δ-values of166Er at high spins

Calculations of the Dynamic Deformation Model for the E2/M1 mixing ratios for ψ-band to ground-band transitions in¹⁶⁶Er have been extended to higher spins (up to I=20). Previous comparisons with the experimental values and with the IBA-1 predictions, available at present up to spins 8 only, are also included for the sake of completeness. Additional comparison with the Frankfurt Model is also given. While all three models give reasonable magnitudes of the mixing ratios, only the DDM gives the sign changes at the correct spin values. Predictions are presented for additional sign changes of the mixing ratios, as well as those of the E2 and the M1 transition moments.     

Semicontinuity and Quasiconvex Functions

Criteria are derived for quasiconvex functions under lower semicontinuity and upper semicontinuity conditions. The results thus obtained generalize earlier results for convex functions. We also give new conditions under which a given function is r-convex in the sense given by Avriel.     

A highly selective and sensitive thorium(IV) PVC membrane electrode based on a dithio-tetraaza macrocyclic compound.

A poly(vinyl chloride)-based membrane composed of dithio-tetraaza macrocyclic compound as a neutral carrier with sodium tetraphenylborate (NaTPB) as an anion excluder and nitrobenzene (NB) as plasticizer was prepared and investigated as a Th(IV)-selective electrode. The electrode exhibits a Nernstian slope of 14.2 +/- 0.3 mV per decade over a wide concentration range (1.0 x 10(-6) to 1.0 x 10(-1) M) with a detection limit of 8.0 x 10(-7) M between pH 3.5 and 9.5. The response time of the sensor is about 10 s and it can be used over a period of 5 months without any divergence in potential. The proposed membrane sensor revealed a good selectivity for Th(IV) over a wide variety of other metal ions and proved to be a better electrode in many respects than those reported in the literature. It was successfully applied as an electrode indicator as well as in the direct determination of thorium ions in standard and real samples.     

Bounds on charged lepton mixing with exotic charged leptons

We examine the effects of mixing induced light heavy charged lepton neutral currents on the partial wave amplitude for the process l⁺l⁻ →ZZ (withl = e,μ or τ). By imposing the constraints that the amplitude should not exceed the perturbative unitarity limit at high energy (√s = Λ), we obtain bounds on light heavy charged lepton mixing parameter sin²(2θ _L ^a ) where θ _L ^a is the mixing angle of the ordinary charged lepton with its exotic partner. For Λ = 1 TeV, no bound is obtained on sin² (2θ _L ^a ) form _E < 0.69 TeV. However, sin² (2θ _L ^a ) ≤ 1.52×10⁻⁵ form _E = 5 TeV, sin² (2θ _L ^a ) ≤ 2.41 ×10⁻⁷ form _E = 10 TeV. Similarity for Λ = ∞ no bound is obtained on sin² (2θ _L ^a ) for m_E < 1.97 TeV and sin² (2θ _L ^a ) ≤ 0.15 form _E = 5 TeV and sin² (2θ _L ^a ) ≤ 3.88×10^-2 form _E = 10 TeV.     

Preparation of (CdO)1−x(PbO)x and (CdS)1−x(PbS)x thin films by spray pyrolysis technique and their characterization

Mixed thin films of (CdO)_1−x(PbO)_x and (CdS)_1−x(PbS)_x (x=0.25) were prepared on glass substrates by spray pyrolysis technique for various substrate temperatures 300, 320 and 340 °C. Structural and optical properties were studied. XRD studies reveal the formation of mixed films. The substrate temperature of 340 °C seems to be critical for the formation of CdO-PbO mixed films. It is observed that (CdS)_1−x(PbS)_x mixed films were formed at all the three substrate temperatures. The direct band gap value of (CdO)_1−x(PbO)_x and (CdS)_1−x(PbS)_x mixed films is about 2.6 and 2.37 eV, respectively.     

Synthesis and characterization of poly(dimethylsiloxane‐urethane) elastomers: Effect of hard segments of polyurethane on morphological and mechanical properties

A series of poly(dimethylsiloxane‐urethane) elastomers based on hexamethylenediisocyanate, toluenediisocyanate, or 4,4′‐methylenediphenyldiisocyanate hard segment and polydimethylsiloxane (PDMS) soft segment were synthesized. In this study, a new type of soft‐segmented PDMS crosslinker was synthesized by hydrosilylation reaction of 2‐allyloxyethanol with polyhydromethylsiloxane, using Karstedt's catalyst. The synthesized soft‐segmented crosslinker was characterized by FT‐IR, ¹H, and ¹³C NMR spectroscopic techniques. The mechanical and thermal properties of elastomers were characterized using tensile testing, thermogravimetric analysis, differential scanning calorimetry (DSC), and dynamical mechanical analysis measurements. The molecular structure of poly(dimethylsiloxane‐urethane) membranes was characterized by ATR‐FTIR spectroscopic techniques. Infrared spectra indicated the formation of urethane/urea aggregates and hydrogen bonding between the hard and soft domains. Better mechanical and thermal properties of the elastomers were observed. The restriction of chain mobility has been shown by the formation of hydrogen bonding in the soft and hard segment domains, resulting in the increase in the glass‐transition temperature of soft segments. DSC analysis indicates the phase separation of the hard and soft domains. The storage modulus (E′) of the elastomers was increasing with increase in the number of urethane connections between the hard and soft segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2980–2989, 2006     

Design,synthesis, and characterization of main‐chain,aromatic polyesters based on 3,4‐ethylenedioxythiophene

A series of new thermoplastic polyesters based on 3,4‐ethylenedioxythiophene (EDOT) with flexible aliphatic spacers have been synthesized and characterized for the first time. The thermal properties of these polyesters based on EDOT are comparable to those of conventional polyesters based on the 1,4‐phenyl unit, indicating that EDOT is a viable replacement for the phenyl units. The glass‐transition and melting‐transition temperatures decrease monotonically with an increase in the spacer length. Theoretical calculations have revealed that the core angle for EDOT is comparable to that of unsubstituted thiophene and hence should be compatible with the formation of the mesophase. This has been confirmed experimentally by the synthesis of a main‐chain, thermotropic, liquid‐crystalline polyester based on EDOT that exhibits fluid birefringence. In fact, this is the first report in which a main‐chain, liquid‐crystalline polymer based on 3,4‐disubstituted thiophene has been successfully designed and synthesized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3479–3486, 2006     

Structure–activity studies on the fungitoxicity of some triorganotin(IV) compounds

Seventeen triorganotin(IV) compounds, with the general formula R₃SnX, containing symmetrical and unsymmetrical combinations of alkyl and aryl groups on tin and with a wide variation in the non-carbon-bonded anionic (X) residues, were examined along with three formally pentacoordinated adducts of triaryltin chlorides with triphenylphosphine oxide for their antifungal activity against nine plant pathogenic and saprophytic fungi. The in vitro tests included inhibitory studies on radial growth, mycelial growth, spore germination, and germ tube elongation. A significant finding was the dependence of fungitoxicity on the nature of the X group in both the tributyltin and triaryltin series, in contrast to earlier published reports on the negligible influence of the X groups on overall toxicity relative to the R group. This suggests that the X group is significantly involved in transporting the biocide to the reactive sites, and that the X group which tends to confer increased solubility to the triorganotin compound gives rise to increased activity. In studies of R group variations, tri-iso-butyltin bromide was found to be much less fungitoxic than tri-n-butyltin compounds, a result which is reconcilable in terms of increased steric encumbrance at the tin site in the former case. The steric factor is also implicated in the reduced activities observed for tris(p-tolyl)tin and tris(p-chlorophenyl)tin compounds relative to (Ph₃SnX) towards most of the fungi screened in this study. In general, it was also noted that the triaryltins were more selective in their antifungal action than the trialkyltins, which exhibited broad spectral activity when applied at the concentration level of 10 μg cm^?3.