Preconcentration and recovery of uranium and thorium from Indian monazite sand by using a modified fly ash bed

Adsorption of uranium, as UO₂ ²⁺, and thorium, as Th⁴⁺, has been studied using a modified fly ash bed. Effects of pH and various ions like La³⁺, Fe³⁺, Ce⁴⁺, SiO₃ ^2- etc., have been examined. Synthetic mixtures of UO₂ ²⁺ and Th⁴⁺ in different concentrations were passed through the bed and eluted separately with various selective reagents viz. ammonium carbonate, sodium carbonate and acetic acid-sodium hydroxide buffer. Separations of these elements at ppm level are shown to be very effective. The separation of uranium and thorium in the presence of lanthanides in monazite sand has been studied successfully. In the analysis of monazite sand, the oxalate precipitation has been avoided. The method is simple and of very low cost. The modified fly ash bed can also be used to remove uranium from contaminated water.     

An Experimental Investigation into the Acoustic Characteristics of Fluid-filled Porous Structures—A Simplified Model of the Human Skull Cancellous Structure

In nature, shape and structure evolve from the struggle for better performance. Often, biological structures combine multiple beneficial properties, making research into mimicking them very complex. Presented here is a summary of observations from a series of experiments performed on a material that closely resembles the human skull bone’s cancellous structure under acoustic loads. Transmission loss through flat and curved open-cell polyurethane foam samples is observed using air and water as the two interstitial fluids. Reduction in strength and stiffness caused by porosity can be recovered partially by filling the interstitial pores with a fluid. The test findings demonstrate the influence of the interstitial fluid on the mechanical characteristics of a porous structure in a quantitative manner. It is also demonstrated that the transmission loss does not depend only on the mass per unit area of the structure as predicted by acoustic mass law. Current tests also demonstrate that the transmission loss is more sensitive to the interstitial fluid than the shape and support conditions of the structures. Test observations thus support the concepts of “moisture-sensitivity of biological design” and the “law of hierarchy in natural design”.     

Growth of Sb-Bi gradient single crystals

The growth conditions and structural quality of Sb-Bi gradient single crystals with Bi content from 2 to 18 at %, grown by the Czochralski method with solid phase feed, are investigated. Bi distribution in the crystals along their pulling direction are studied by electron probe microanalysis and the change in the interplanar spacing is analyzed by double-crystal X-ray diffraction. It is established that the pulling rate and feed mass affect the Bi distribution in Sb-Bi single crystals.     

Thermal-performance evaluation of coolant passages with staggered arrays of pin fins

Three-dimensional laminar forced convection including steady-periodic transition is investigated up to periodic-chaotic transition in the fully developed region of coolant passages with staggered arrays of pin fins. Comparative examples concern overall pressure losses and heat transfer characteristics of circular, square and elliptical pins made of nickel and copper. In the numerical model, transient conjugate heat transfer is assumed and space periodicities in pressure, velocity components and temperatures are taken into account. In the range of operative conditions investigated, overall friction factors increase almost linearly with the Reynolds number, while the increase of overall Nusselt numbers with the Reynolds number is characterized by two slope changes connected with the onset of streamwise vortices, and the shedding of transverse vortices, respectively. The use of copper, instead of nickel, increases the overall Nusselt number with all shapes, but is particularly beneficial to the elliptical section. Square pins are characterized by the highest values of friction factors, but are also the best performers as far as convection enhancing is concerned. The reverse is true for the elliptical pins which are characterized by the lowest values of friction factors, but are the worst performers as far as convection enhancing is concerned. On the basis of overall performances, the elliptical pins made of copper are the best choice, at least in the upper range of Reynolds numbers investigated.     

3,4‐[2,2‐Bis(methoxyethoxymethoxymethyl)propylenedithio]‐3′,4′‐(ethylenedithio)tetrathiafulvalene: a spiro‐substituted BEDT–TTF analogue

The crystal structure of the title compound [systematic name: 2‐(1,3‐dithiolo[4,5‐b][1,4]dithiin‐2‐ylidene)‐6,6‐bis(methoxyethoxymethoxymethyl)‐1,3‐dithiolo[4,5‐b][1,4]dithiepine], C₂₁H₃₀O₆S₈, a spiro‐substituted BEDT–TTF analogue [BEDT–TTF is bis(ethylenedithio)tetrathiafulvalene], has a strongly bent heterocyclic framework. The seven‐membered ring adopts a pseudo‐chair conformation with notably widened ring bond angles, especially at the methylene C atoms [119.49 (11) and 117.60 (11)°]. The axial side chain adopts an extended conformation, but the equatorial side chain curls back on itself and the O atom nearest the ring system is involved in three short contacts to H atoms (2.45–2.53 Å). The molecules pack in centrosymmetrically related pairs, which are isolated from each other by columns of the polyether side chains. This study emphasizes the ease of distortion of the neutral bis(propylenedithio)tetrathiafulvalene ring structure, and how the need to accommodate side chains can easily override the tendency of these donor systems to form stacks in the crystalline state.     

Mathematical simulation of the evaporation in operation area of a bubble evaporator

Simulation of evaporation in operation area of an evaporator is considered. We obtained a formalized model of this process and optimum conditions of an engineering system on the basis on the analysis.     

Rheological properties of polyacrylates used as synthetic road binders

Most adhesives and binders, including bitumen for asphalt mixture production, are presently produced from petrochemicals after the refining of crude oil. The fact that crude oil reserves are a finite resource means that in the future, it may become necessary to produce these materials from alternative and probably renewable sources. Suitable resources of this kind may include polysaccharides, plant oils and proteins. This paper deals with the synthesis of polymer binders from monomers that could, in future, be derived from renewable resources. These binders consist of polyethyl acrylate (PEA) of different molecular weight, polymethyl acrylate (PMA) and polybutyl acrylate (PBA), which were synthesised from ethyl acrylate, methyl acrylate and butyl acrylate, respectively, by atom transfer radical polymerisation. The rheological properties of these binders were determined by means of oscillatory testing using a dynamic shear rheometer and combinations of stress/strain, temperature and frequency sweeps. The results indicate that PEA can be produced to have rheological properties similar to that of ‘soft’ 100/150 penetration grade bitumen, PMA with similar rheological properties to that of ‘hard’ 10/20 penetration grade bitumen, while PBA, due to its highly viscous nature and low dynamic moduli, cannot be used on its own as a binder. The synthetic polymers were found to be thermo-rheologically simple, and the shift factors, used to produce the dynamic moduli master curves, were found to fit an Arrhenius function.