Reactions of titanium(IV) isopropoxide with aliphatic and aromatic hydroxy esters,part I. 5-, 6-, 7- and 8-coordinate titanium(IV) complexes

Summary Reactions of titanium(IV) isopropoxide with ethyl 1-hydroxycyclohexylacetate, ethyl 2-hydroxy-2-arylpropionate, ethyl 2-hydroxy-2-arylbutyrate and ethyl 2-hydroxy-2-arylhydrocinnamate have been studied in dry benzene in different molar ratios under strictly anhydrous conditions. The Ti(OPr-i)₄-_nL_n type compounds, where L = hydroxy ester and n = 1 to 4, have been isolated and characterised by elemental analysis, molecular weight, i.r. and n.m.r. spectral studies. These products may be distilled unchanged under reduced pressure.Reprints of this are not available.     

Nanocomposite Hydrogel of Pd@ZIF-8 and Laponite®: Size-Selective Hydrogenation Catalyst under Mild Conditions

The composite hydrogel of a nanoscale metal–organic framework (NMOF) and nanoclay has emerged as a new soft-material with advanced properties and applications. Herein, we report a facile synthesis of a hydrogel nanocomposite by charge-assisted self-assembly of Pd@ZIF-8 nanoparticles with Laponite^® nanoclay which coat the surface of Pd@ZIF-8 nanoparticles. Such surface coating significantly enhanced the thermal stability of the ZIF-8 compared to the pristine framework. Further, the Pd@ZIF-8+LP hydrogel nanocomposite shows better size-selective catalytic hydrogenation of olefins than Pd@ZIF-8 nanoparticles based on selective diffusion of the substrate.     

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η⁵-P₅)] (Cp*=C₅Me₅) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(^DippBDI−Mg(CH₃))₂] (^DippBDI={[2,6-ⁱPr₂C₆H₃NCMe]₂CH}⁻) reacts with [Cp*Fe(η⁵-P₅)] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η⁵-P₅)] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η⁵-P₅)]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P₅ ring of [Cp*Fe(η⁵-P₅)]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P₇)³⁻ was obtained by molecular calcium hydride mediated P₄ reduction.     

Investigation of viscoelastic focusing of particles and cells in a zigzag microchannel

Microfluidic particle focusing has been a vital prerequisite step in sample preparation for downstream particle separation, counting, detection, or analysis, and has attracted broad applications in biomedical and chemical areas. Besides all the active and passive focusing methods in Newtonian fluids, particle focusing in viscoelastic fluids has been attracting increasing interest because of its advantages induced by intrinsic fluid property. However, to achieve a well-defined focusing position, there is a need to extend channel lengths when focusing micrometer-sized or sub-microsized particles, which would result in the size increase of the microfluidic devices. This work investigated the sheathless viscoelastic focusing of particles and cells in a zigzag microfluidic channel. Benefit from the zigzag structure of the channel, the channel length and the footprint of the device can be reduced without sacrificing the focusing performance. In this work, the viscoelastic focusing, including the focusing of 10 μm polystyrene particles, 5 μm polystyrene particles, 5 μm magnetic particles, white blood cells (WBCs), red blood cells (RBCs), and cancer cells, were all demonstrated. Moreover, magnetophoretic separation of magnetic and nonmagnetic particles after viscoelastic pre-focusing was shown. This focusing technique has the potential to be used in a range of biomedical applications.     

Thermotropic copolyesters. II. Synthesis and characterization of liquid-crystal copolyesters containing the bicyclo[2.2.2]octane ring system

The syntheses and characterizations of poly(oxy-trans-1,4-cyclohexyleneoxycarbonyl-1,4-bicyclo[2.2.2]octylenecarbonyl) (I) and poly(oxy-trans-1,4-cyclohexyleneoxycarbonyl-1,4-bicyclo[2.2.2]octylenecarbonyl-co-oxy-trans-1,4-cyclohexyleneoxysebacoyl) (II) are described. The polymer systems were characterized by infrared spectroscopy, proton magnetic resonance spectroscopy, solution viscosity, and differential scanning calorimetry. The random copolyester prepared from 1:0.65:0.35 mol of trans-1,4-cyclohexanediol, bicyclo[2.2.2]octane-1,4-dicarbonyl chloride, and sebacoyl chloride, respectively, formed a birefringent fluid state in the melt.     

Synthesis of Pharmaceutical Intermediates by Toluene Benzylation over Heteropoly Acids on Different Support

Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyl- diphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay (K-10, montmorillonite), plane H-Beta, plane MFI structured titanosilicate (TS-1) and heteropoly acids [HPA, namely dodeca-tungstophosphoric acid [H3PO4.12WO3.xH2O] (TPA), dodeca-molybdo phosphoric acid ammonium salt hydrate [H12Mo12N3O40P aq] (DMAA), sodium tungstate hydrated purified [Na12WO4.2H2O] (STH)] supported on clay, H-beta and TS-1. The 20%TPA/Clay, 30%TPA/H-Beta and 30%TPA/TS-l, were observed to be the best catalyst samples over plane clay, plane H-Beta and plane TS-1. The catalyst samples are compared with respect to benzyl chloride conversion and selectivities for diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid. The reaction follows the pseudo-first order rate power law model. The apparent rate constants are calculated and compared with the reported ones.     

Synthesis and Study of Polymeric Ultraviolet Absorbers. II

Polymeric UV absorbers have been prepared by free-radical solution copolymerization at 75°C of methyl methacrylate and 2-hydroxy-4-methacryloyloxybenzophenone monomers at low conversion (around 10%). The composition of the copolymers was determined by UV, IR, and NMR studies. The molecular weight was estimated by GPC. The reactivity ratios were determined by several methods. Viscosity was used to study the effect of copolymer composition and solvents. The copolymers were also analyzed by TGA and DSC, and DSC was used to study the effect of copolymer composition on T_g.     

1,4‐Dipolar Cycloaddition Reactions in Ionic Liquids: A Facile Synthesis of 9aH,15H‐[1]Benzopyrano[3′,2′: 3,4]pyrido[2,1‐a]isoquinolines (=9aH,15H‐Benzo[a][1]benzopyrano[2,3‐h]quinolizines)

Ionic liquids were found to be a suitable reaction medium for 1,4‐dipolar cycloaddition reactions of an isoquinoline, an activated alkyne, and a 4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehyde at room temperature to afford [1]benzopyrano‐pyrido‐isoquinoline (=9aH,15H‐benzo[a][1]benzopyrano[2,3‐h]quinolizine) derivatives selectively in good yields. The ionic liquid can be recovered and recycled in further runs without loss of activity.     

Investigation and optimization of the recovery of coal fines using oil agglomeration process: Use of waste oils from different sectors

The high cost of the bridging liquid subdues the implementation and commercialization of oil agglomeration process. To overcome this problem, waste oils from different sectors were used in this present study. The performance of the process was assessed based on the responses like ash rejection and organic matter recovery. The aim of the present study was to investigate the usage of waste oils from different sectors and to optimize and analyze the behavioral pattern showcased by different variables (pulp density, oil dosage, agglomeration time and oil type) using response surface methodology (Box-Behnken design). Experimental investigation shows that the optimum pulp density, oil dosage, agglomeration time and oil type condition obtained as 3%, 15%, 15?min and waste engine oil, respectively. At optimum condition, the % ash rejection and % organic matter recovery obtained as 63.94% and 81.8%, respectively.     

Visible light photoredox catalysis with N-hydroxyphthalimide for [4+2] cyclization between N-methylanilines and maleimides

An efficient [4+2] cyclization of N-methylanilines with maleimides to afford tetrahydroquinolines using N-hydroxyphthalimide as a metal-free and cheap organophotoredox catalyst is reported. The protocol involves C(sp³)H activation of N-methylanilines for the formation of α-amino radical without an oxidant at room temperature. The present method describes an easy preparation of tricyclic heterocycles in good to excellent yields under mild reaction conditions.