Organically modified montmorillonite and chitosan–phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications

Nanocomposite membranes based on polyelectrolyte complex (PEC) of chitosan/phosphotungstic acid (PWA) and different types of montmorillonite (MMT) were prepared as alternative membranes to Nafion for direct methanol fuel cell (DMFC) applications. Fourier transform infrared spectroscopy (FTIR) revealed an electrostatically fixed PWA within the PEC membranes, which avoids a decrease in proton conductivity at practical condition. Various amounts of pristine as well as organically modified MMT (OMMT) (MMT: Cloisite Na, OMMT: Cloisite 15A, and Cloisite 30B) were introduced to the PEC membranes to decrease in methanol permeability and, thus, enhance efficiency and power density of the cells. X-ray diffraction patterns of the nanocomposite membranes proved that MMT (or OMMT) layers were exfoliated in the membranes at loading weights of lower than 3 wt.%. Moreover, the proton conductivity and the methanol permeability as well as the water uptake behavior of the manufactured nanocomposite membranes were studied. According to the selectivity parameter, ratio of proton conductivity to methanol permeability, the PEC/2 wt.% MMT 30B was identified as the optimum composition. The DMFC performance tests were carried out at 70 °C and 5 M methanol feed and the optimum membrane showed higher maximum power density as well as acceptable durability compared to Nafion 117. The obtained results indicated that owing to the relatively high selectivity and power density, the optimum nanocomposite membrane could be considered as a promising polyelectrolyte membrane (PEM) for DMFC applications.     

A green and efficient procedure for one-pot synthesis of xanthenes and acridines using silica boron–sulfuric acid nanoparticles (SBSANs) as a solid Lewis-protic acid

Silica boron–sulfuric acid nanoparticles (SBSANs) as a solid Lewis-protic acid have been found to be an efficient heterogeneous catalyst in the synthesis of xanthene and acridine derivatives. The SBSAN-catalyzed reaction between carbonyl compound (aldehyde/ketone/ethyl orthoformate) and 5,5-dimethyl-1,3-cyclohexanedione (dimedone) for synthesis of xanthene derivatives is performed under mild conditions with the excellent isolated yield. Also, we can apply a broad scope of carbonyl compounds and amines for efficient synthesis of various acridine derivatives in the presence of SBSAN catalyst. In these multicomponent approaches the SBSAN catalyst can be reused for several times without any treatment in its catalytic activity.     

Optimization of synthesis procedure and structure characterization of manganese tungstate nanoplates

A simple and fast chemical method was used for synthesis of manganese tungstate nanoplates in flower-like clusters; while Taguchi robust design was employed as statistical method for optimization of the experimental parameters for the procedure. Ultrafine manganese tungstate plates in flower-like clusters were synthesized via a direct precipitation method involving addition of manganese ion solution to the aqueous tungstate reagent. Effects of various reaction conditions such as manganese and tungstate concentrations, flow rate of reagent addition and reactor temperature on the thickness of the synthesized manganese tungstate plates were investigated experimentally. Analysis of variance (ANOVA) showed that manganese tungstate nanoplates could be effectively synthesized by tuning significant parameters of precipitation procedure. Meanwhile, optimum conditions for synthesis of MnWO4 nanoplates via this simple, fast, and cost effective method were proposed. The structure and composition of the prepared nanoplates under optimum conditions were characterized by EDX, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR spectroscopy, and photoluminescence techniques.      

Speciation Analysis of Cr(III) and Cr(VI) after Solid Phase Extraction Using Modified Magnetite Nanoparticles

A new solid phase extraction (SPE) method has been developed for the speciation of Cr(III) and Cr(VI). This method is based on the adsorption of Cr(VI) on modified alumina‐coated magnetite nanoparticles (ACMNPs). Total chromium in different samples was determined as Cr(VI) after oxidation of Cr(III) to Cr(VI) using H₂O₂. The chromium concentration has been determined by flame atomic absorption spectrometric (FAAS) technique and amount of Cr(III) was calculated by substracting the concentration of Cr(VI) from total chromium concentration. The effect of parameters such as pH, amount of adsorbent, contact time, sample volume, eluent type, H₂O₂ concentration and cetyltrimethylammonium bromide (CTAB) concentration as modifier on the quantitative recovery of Cr(VI) were investigated. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation (RSD) of Cr(VI) were 140 (for 350 mL of sample solution), 0.083 ng mL^?1, 0.1‐10.0 ng mL^?1 and 4.6% (for 5.0 ng mL^?1, n = 7), respectively. This method avoided the time‐consuming column‐passing process of loading large volume samples in traditional SPE through the rapid isolation of CTAB@ACMNPs with an adscititious magnet. The proposed method was successfully applied to the determination and speciation of chromium in different water and wastewater samples and suitable recoveries were obtained.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Evaluation of the cyclotron production of 165Er by different reactions

Erbium-165 with 10.3 h physical half-life decays completely by electron capture to the ground state of stable isotope ¹⁶⁵Ho and it is an ideal radio lanthanide for Auger electron therapy. Excitation function of ¹⁶⁵Er via ^natEr(p,x)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁶Er(p,2n)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁵Ho(p,n)¹⁶⁵Er and ¹⁶⁵Ho(d,2n)¹⁶⁵Er reactions were calculated using ALICE/ASH (Hybrid and GDH models) and EMPIRE 3.1 codes and then were compared with the reported measurement by experimental data and TENDL-2011. Physical yield and target thickness were evaluated with attention to excitation function, stopping power and SRIM code. ¹⁶⁵Er was produced using the sedimentation technique through the ^natEr (p,x)¹⁶⁵Tm → ¹⁶⁵Er reaction. The deposited target was irradiated with 15 MeV proton beams at 20 μA current for 1 h. The ¹⁶⁵Tm production yield was 26 MBq/μA h at the end of bombardment.     

Activation cross-sections of longer lived products of proton induced nuclear reactions on cobalt up to 70 MeV

As a part of our series of studies on charged particle induced reactions on various target materials, proton induced excitation functions on natural cobalt have been determined by using the stacked-foil technique. In these measurements the radionuclides ^55,56,57,58Co, ⁵¹Cr, ^52,54,56Mn and ^56,57Ni have been identified. For the above mentioned nuclides the cross-sections were derived from the measured activities and were compared with the literature data and with the results of EMPIRE code calculations and tabulated values in the TENDL 2011 library (based on TALYS code calculations). The agreement with previous measurements and with theoretical values was acceptable.     

Effect of Phosphate on Glucosamine Production by Ethanolic Fungus Mucor indicus

In this study, the effect of phosphorous compound concentration on the production of glucosamine by Mucor indicus was investigated. Changes in the yield of ethanol, the major metabolite of the fungus, were also followed besides. The alkali insoluble material of the biomass of the fungus mainly contained phosphates and polymers of glucosamine and N-acetyl glucosamine, i.e., chitin and chitosan. Yields of glucosamine (78–113 g/kg dry fungal biomass) and ethanol (200–370 g/kg glucose) were significantly affected by the phosphorous concentration. The results showed that lower concentrations of phosphorous favored the production of glucosamine while higher ethanol as well as biomass yields was obtained at higher concentrations. The best concentration was 0.5 g/l where glucosamine yield was 0.37 g/l (11 % of the biomass). At this phosphate concentration, ethanol and biomass yields were 360 and 76 g/kg glucose, respectively. On average, proteins comprised 51.5 % of the biomass. Glycerol was the second important metabolite during the fermentation by the fungus which appeared at lower yields (20–34 g/kg glucose).     

Fabrication of ozone gas sensor based on FeOOH/single walled carbon nanotube-modified field effect transistor

A novel ozone (O₃) sensor is fabricated using commercial metal oxide field effect transistor (MOSFET), modified with single-walled carbon nanotubes (SWCNTs). In this study, integrated circuit (IC: BS250) was selected as the selective probe for O₃ detection. For this purpose, a plastic cover on the surface of the drain was drilled to bare the drain surface, followed by its modification with nitrogen and sulfur-functionalized SWCNTs by chemical vapor deposition (CVD) process. The CVD-synthesized SWCNTs were then electrodeposited with FeOOH nanostructures. According to the figures of merit, the fabricated sensor gave a linear output from 20 to 450 parts per billion (ppb). Detection limit was also 4.1?ppb. Relative standard deviation (RSD) for seven replicate analyses was 3.61%. Based on 90% of maximum response (t₉₀), the response time was ～1.5?min. Calibration sensitivity was measured to 1.3?mV/ppb. No interference was observed, when introducing at least 500 folds of interferences of gaseous species such as H₂O, HCl, H₂S, O₂, H₂, CO, CO₂, NO₂, SO₂, Cl₂, C₂H₂, CH₄ and volatile organic compounds (VOCs) to 250?ppb of O₃ solution. Reliability of the sensor was also evaluated via determination of O₃ in different air samples.     

Pertraction of methylene blue using a mixture of D2EHPA/M2EHPA and sesame oil as a liquid membrane

An experimental study on the pertraction of methylene blue (MB) through a supported liquid membrane (SLM) using a mixture of mono-(2-etylhexyl) ester of phosphoric acid (M2EHPA) and bis-(2-etylhexyl) ester of phosphoric acid (D2EHPA) and sesame oil as the liquid membrane (LM) was performed. Parameters affecting the pertraction of MB such as initial MB concentration, carrier concentration, feed phase pH, and stripping phase concentration were analyzed. Optimal experimental conditions for MB pertraction (permeability of 5.63 × 10^?6) were obtained after a 7 h separation with the MB concentration in the feed phase of 80 mg L^?1, D2EHPA/M2EHPA concentration in membrane phase of 40 vol. %, feed pH of 6, and acetic acid concentration in the stripping phase of 0.4 mol L^?1. Kinetics of transport and stability of the SLM system were also studied and the mass transfer coefficient for this system was evaluated. Scanning electron microscopy (SEM) was used to morphologically characterize the membrane surface.