Electromembrane extraction of gonadotropin‐releasing hormone agonists from plasma and wastewater samples

In the present study, for the first time electromembrane extraction followed by high performance liquid chromatography coupled with ultraviolet detection was optimized and validated for quantification of four gonadotropin‐releasing hormone agonist anticancer peptides (alarelin, leuprolide, buserelin and triptorelin) in biological and aqueous samples. The parameters influencing electromigration were investigated and optimized. The membrane consists 95% of 1‐octanol and 5% di‐(2‐ethylhexyl)‐phosphate immobilized in the pores of a hollow fiber. A 20 V electrical field was applied to make the analytes migrate from sample solution with pH 7.0, through the supported liquid membrane into an acidic acceptor solution with pH 1.0 which was located inside the lumen of hollow fiber. Extraction recoveries in the range of 49 and 71% within 15 min extraction time were obtained in different biological matrices which resulted in preconcentration factors in the range of 82–118 and satisfactory repeatability (7.1 < RSD% < 19.8). The method offers good linearity (2.0–1000 ng/mL) with estimation of regression coefficient higher than 0.998. The procedure allows very low detection and quantitation limits of 0.2 and 0.6 ng/mL, respectively. Finally, it was applied to determination and quantification of peptides in human plasma and wastewater samples and satisfactory results were yielded.     

Synthesis and applications of cross-linked poly(diallyldimethyl ammonium chloride) and its derivative copolymers as efficient phase transfer catalyst for nucleophilic substitution reactions

Cross-linked poly(diallyldimethylammonium chloride) and its derivative copolymers were synthesized and used as phase transfer catalyst in the nucleophilic substitution reaction especially halogen exchange reactions. In addition, the effect of hydrophilic-hydrophobic character of the polymers in the nucleophilic reactions was investigated.     

Metallation of tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> Schiff base with Mn(II), Co(II), Cu(II) and Zn(II): synthesis,characterization and formation constants measurement

Four Schiff base ligands, salabza-H₂ = N,N′-bis(salicylidene)-2-aminobenzylamine, were synthesized by condensation of one mole of 2-aminobenzylamine and two moles of salicylaldehyde and/or two moles of substituted salicylaldehyde (5-OMe, 5-Br, 5-NO₂). All the four Schiff bases and their Mn(II), Co(II), Cu(II) and Zn(II) complexes are characterized by UV-Vis, FT-IR, ¹H NMR spectroscopy, mass spectrometry and elemental analysis. The formation constants and the Gibbs free energies were measured spectrophotometrically for 1:1 complexes in methanol in constant ionic strength (I = 0.1 mol dm⁻³ NaClO₄) and at 25°C. The data refinement was carried out with the SQUAD program. The trend of formation constants of H₂L¹ with M(II) follows the order: Mn(II) (3.97) < Zn(II) (4.30) < Co(II) (4.89) < Cu(II) (5.73)     

Designing different nanomagnets via delocalization of cobalt magnetic moment inside narrow single walled carbon nanotubes

Density functional theory calculations were employed to study the effects of chirality and diameter of single walled carbon nanotubes (SWCNTs) on electronic, structural and magnetic properties of cobalt-doped (9,0), (5,5) and (5,0) nanotube systems. The (9,0) and (5,5) SWCNTs have similar diameters but different chiralities, whereas the (5,0) tube has a very small diameter. The Co-SWCNT systems are considered with four different possible arrangements, three of which are stable and only substitution of the Co with one of the carbon atoms on the surface of the SWCNTs is an exemption. Although the quasi-metallic band gap of the (9,0) SWCNT is eliminated by the cobalt doping process, metallic features of the (5,5) and (5,0) nanotubes remain unchanged. On the other hand, delocalization of the cobalt’s magnetization and inducement of a noticeable magnetization to the tubes provide a vast area of possible total magnetizations for the Co-SWCNT systems. The results are applicable to spintronics and useful for designing other nanomagnetic systems.     

Nuclear model calculation on charge particle induced reaction on Rb and Kr targets and targetry for 82Sr production

The ⁸²Sr/⁸²Rb radionuclide generator is used very commonly in positron emission tomography. ALICE/ASH and TALYS 1.0 codes were used to calculate excitation functions for proton, alpha and ³He induced on various targets that lead to produce ⁸²Sr radioisotope using intermediate energy accelerators. Recommended thickness of the targets according to SRIM code was premeditated. The application of those data, particularly in the calculation of integral yields, is discussed and theoretical integral yields for any reaction were computed. To consider precision of TALYS 1.0 code calculations, ⁸⁵Rb(p,4n)⁸²Sr process was determined as most interesting one due to radionuclide purity. The TALYS 1.0 code predicts a maximum cross-section of about 130 mb at 47 MeV for this reaction. Rubidium chloride deposition on copper substrate was carried out via sedimentation method in order to produce ⁸²Sr. 2.98 g RbCl, 1.043 g ethyl cellulose, 10 mL acetone were used to prepare a layer of enriched rubidium chloride of 11.69 cm² area and 0.34 g/cm² thickness.     

Time-dependent natural convection in a square cavity: Application of a new finite volume method

A new finite volume (FV) approach with adaptive upwind convection is used to predict the two-dimensional unsteady flow in a square cavity. The fluid is air and natural convection is induced by differentially heated vertical walls. The formulation is made in terms of the vorticity and the integral velocity (induction) law. Biquadratic interpolation formulae are used to approximate the temperature and vorticity fields over the finite volumes, to which the conservation laws are applied in integral form. Image vorticity is used to enforce the zero-penetration condition at the cavity walls. Unsteady predictions are carried sufficiently forward in time to reach a steady state. Results are presented for a Prandtl number (Pr) of 0-71 and Rayleigh numbers equal to 10³, 10⁴ and 10⁵. Both 11 × 11 and 21 × 21 meshes are used. The steady state predictions are compared with published results obtained using a finite difference (FD) scheme for the same values of Pr and Ra and the same meshes, as well as a numerical bench-mark solution. For the most part the FV predictions are closer to the bench-mark solution than are the FD predictions.     

Threshold reduction of stimulated Brillouin scattering in photonic crystal fiber

A simple configuration for the reduction of stimulated Brillouin scattering threshold in photonic crystal fiber is presented. The threshold reduction is contributed by the bidirectional pumping scheme through the reflection of transmitted Brillouin pump back to the gain medium. The pump recycling scheme has greatly reduced the Brillouin threshold of a 200-m long of photonic crystal fiber from 50 to 30 mW of Brillouin pump power.     

Phase behavior study of poly(N‐tertbutylacrylamide‐co‐acrylamide) in the mixture of water–methanol: The role of polymer–nonsolvent second‐order interactions

The phase behavior of poly(N‐tertbutylacrylamide‐co‐acrylamide) (PNTBAM) in pure water and mixture of water–methanol is studied at different temperatures. The different compositions of PNTBAM are prepared by free‐radical polymerization technique and their phase behavior is studied by turbidimetry. The effects of copolymer and solvent composition on the phase behavior of the copolymers are discussed. It has been suggested that the inhomogenities in polymer chains are responsible for lowering the rate of phase transition by increasing the N‐tertbutylacrylamide (NTBAM) and methanol contents in copolymer and mixture, respectively. For the first time we have revealed that there are second‐order binary interactions in the water–methanol which are dominant in the special range of copolymer composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 455–462, 2009     

A fuzzy-stochastic OWA model for robust multi-criteria decision making

All realistic Multi-Criteria Decision Making (MCDM) problems face various kinds of uncertainty. Since the evaluations of alternatives with respect to the criteria are uncertain they will be assumed to have stochastic nature. To obtain the uncertain optimism degree of the decision maker fuzzy linguistic quantifiers will be used. Then a new approach for fuzzy-stochastic modeling of MCDM problems will be introduced by merging the stochastic and fuzzy approaches into the OWA operator. The results of the new approach, entitled FSOWA, give the expected value and the variance of the combined goodness measure for each alternative. Robust decision depends on the combined goodness measures of alternatives and also on the variations of these measures under uncertainty. In order to combine these two characteristics a composite goodness measure will be defined. The theoretical results will be illustrated in a watershed management problem. By using this measure will give more sensitive decisions to the stakeholders whose optimism degrees are different than that of the decision maker. FSOWA can be used for robust decision making on the competitive alternatives under uncertainty.