Supercritical carbon dioxide extraction of Mentha pulegium L. essential oil

The dependence of Mentha pulegium L. (pennyroyal) essential oil composition, obtained by supercritical carbon dioxide (SC-CO₂), with the following parameters: pressure, temperature, extraction time (dynamic), and modifier (methanol) was studied. The results were also compared with those obtained by conventional hydrodistillation method in laboratory conditions. Regarding the percentages of menthone (30.3%) and pulegone (52.0%), the optimum SFE results were obtained at the following experimental conditions: pressure=100 atm, T=35 °C, dynamic time=10 min, and V_modifier=0 μl. The results of hydrodistillation showed that the major components of M. pulegium L. were pulegone (37.8%), menthone (20.3%), and piperitenone (6.8%). The evaluation of the composition of each extract was performed by gas chromatography-mass spectrometry.     

Clustering files of chemical structures using the fuzzy k-means clustering method

This paper evaluates the use of the fuzzy k-means clustering method for the clustering of files of 2D chemical structures. Simulated property prediction experiments with the Starlist file of logP values demonstrate that use of the fuzzy k-means method can, in some cases, yield results that are superior to those obtained with the conventional k-means method and with Ward's clustering method. Clustering of several small sets of agrochemical compounds demonstrate the ability of the fuzzy k-means method to highlight multicluster membership and to identify outlier compounds, although the former can be difficult to interpret in some cases.     

Effect of nanoclay and macroinitiator on the kinetics of atom transfer radical homo- and copolymerization of styrene and methyl methacrylate initiated with CCl3-terminated poly (vinyl acetate) macroinitiator

Effect of nanoclay on the kinetics of atom transfer radical bulk homo- and copolymerization of styrene (St) and methyl methacrylate (MMA) initiated with CCl₃-terminated poly (vinyl acetate) macroinitiator at 90 °C was investigated. CuCl/PMDETA was used as a catalyst system. Results showed that nanoclay significantly enhances the homopolymerization rate of MMA. It was attributed to the activated conjugated CC bond of MMA monomer via interaction between the carbonyl group of MMA monomer and the hydroxyl moiety (AlOH) of nanoclay as well as to the effect of nanoclay on the dynamic equilibrium between the active (macro)radicals and dormant species. Homopolymerization rate of St (a noncoordinative monomer with nanoclay) decreased slightly in the presence of nanoclay. It could be explained by inserting of a portion of macroinitiator into the clay galleries, where no sufficient St monomer exists due to the low compatibility or interaction of St monomer with nanoclay to react with the macroinitiator. Controlled/living characteristic of all the reactions were confirmed by GPC results. More reliable reactivity ratios of the St and MMA in the presence of nanoclay were calculated by using the cumulative average copolymer composition at the moderate to high conversion to be r_St = 0.290 ± 0.082, r_MMA = 0.443 ± 0.093 (extended Kelen-Tudos method) and r_St = 0.293 ± 0.071, r_MMA = 0.447 ± 0.080 (Mao-Huglin method). Results indicated that the rate of incorporation of MMA comonomer into the copolymer increases in the presence of nanoclay, verifying the existence of interaction between the carbonyl group of MMA comonomer and the hydroxyl moiety of nanoclay. It was found that in the presence of nanoclay, tendency of the random copolymerization of St and MMA toward an alternating copolymerization increases.     

Micro ATR‐FTIR study of the hydration state of poly(N‐tert‐butylacrylamide‐co‐acrylamide) copolymers during phase transition in aqueous media and in the mixture of water–methanol

Coil‐globule transition of poly(N‐tert‐butylacrylamide‐co‐acrylamide) P(NTBAM‐co‐AM) copolymers is investigated in the aqueous solution and in the mixture of water–methanol by micro ATR‐FTIR spectroscopy technique. In this study the microstructure and its changes in the hydration states of the distinct groups of these copolymers are investigated by micro ATR/FTIR technique. The results showed that by heating the solution above the LCST hydrogen bonding between C?O and water was decreased but the hydrogen bonding between polymeric chains increased, which prove the aggregation of polymer chain during phase separation. The chemical shifts of IR bands are also studied in the mixture of water–methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 356–363, 2010     

Excited-state distortions determined from structured luminescence of nitridorhenium(V) complexes

The nitridorhenium(V) complexes ReNCl(2)(PCy3)(2) (1), ReNBr(2)(PCy3)(2) (2), ReNCl(2)(PPh3)(2) (3), and ReNBr(2)(PPh3)(2) (4) produce structured emission spectra upon excitation at low temperature. The origin, E(00), occurs at 15 775, 16 375, 15 875, and 16 300 cm(-1), respectively. The vibronic peaks are regularly spaced with an average energy separation corresponding to the Re triple bond N stretching frequency. The nitridorhenium stretching frequency ranges from 1095 to 1101 cm(-1), as determined by Raman and IR spectroscopy. The excited-state distortions are calculated by fitting the emission spectra. The excited state arises primarily from a d(xy) (ReN nonbonding) to d(yz) (ReN pi antibonding) transition. The rhenium-nitrogen bond length in the excited state is 0.08 A longer than in the ground electronic state, which is consistent with the difference in bond lengths of ReN bonds of bond order 3 and bond order 2.5 as determined from molecular structures.     

Hydroxyl radical is the active species in photochemical DNA strand scission by bis(peroxo)vanadium(V) phenanthroline

Bis(peroxo)vanadium(V) complexes are widely investigated as anticancer agents. They exert their antitumor and cyctotoxic effects through inhibition of tyrosine phosphatases and DNA cleavage, respectively. The latter process remains poorly understood. The mechanism of DNA cleavage by NH(4)[(phen)V(O)(eta(2)-O(2))(2)] (phen = 1,10-phenanthroline) was investigated. Kinetic studies on DNA cleavage revealed that the complex is a single-strand nicking agent with no specificity. EPR experiments using 2,2,6,6-tetramethyl-4-piperidone (TMP) and 5,5'-dimethyl-1-pyrroline-N-oxide (DMPO) as spin-traps for singlet oxygen and hydroxyl radical, respectively, implicated hydroxyl radical production upon photodecomposition of bis(peroxo)vanadium(V). This was corroborated by benzoate inhibition of DNA strand scission and stoichiometric oxidation of 2-propanol to acetone upon irradiation of bis(peroxo)vanadium(V) phenanthroline. High-resolution polyacrylamide gel analysis of the vanadium cleavage reaction and [Fe(II)EDTA](2)(-)/H(2)O(2) resulted in comigration of "ladder" pattern bands, which superimposed when both reactions were run on the same lane. These findings identify hydroxyl radical produced from the photooxidation of the peroxo ligand on vanadium as the active species in DNA cleavage.     

Microfluidic synthesis of chitosan-based nanoparticles for fuel cell applications

A microfluidic platform is developed for the synthesis of monodisperse, 100 nm, chitosan based nanoparticles using nanogelation with ATP. The resulting nanoparticles tuned and enhanced transport and electrochemical properties of Nafion based nanocomposite membranes, which is highly favorable for fuel cell applications.     

Facile,one-pot synthesis of new phenanthridine derivatives through 1,4-dipolar cycloaddition of phenantridine,activated acetylenes,and aromatic aldehydes

A facile, one-pot synthesis of new phenanthridine derivatives by a three-component reaction between phenantridine, dialkyl acetylenedicarboxylates（DAADs）, and aromatic aldehydes is described. The reaction is characterized by mild conditions, high selectivity, and tolerance to various functional groups.     

New Polydentate Trimethylsilyl Chalcogenide Reagents for the Assembly of Polyferrocenyl Architectures

A series of polychalcogenotrimethylsilane complexes Ar(CH₂ESiMe₃)_n, (Ar=aryl; E=S, Se; n=2, 3, and 4) can be prepared from the corresponding polyorganobromide and M[ESiMe₃] (M=Na, Li). These represent the first examples of the incorporation of such a large number of reactive ?ESiMe₃ moieties onto an organic molecular framework. They are shown to be convenient reagents for the preparation of the polyferrocenylseleno‐ and thioesters from ferrocenoyl chloride. The synthesis, structures, and spectroscopic properties of the new silyl chalcogen complexes 1,4‐(Me₃SiECH₂)₂(C₆Me₄) (E=S, 1 ; E=Se, 2 ), 1,3,5‐(Me₃SiECH₂)₃(C₆Me₃) (E=S, 3 ; E=Se, 4 ) and 1,2,4,5‐(Me₃SiECH₂)₄(C₆H₂) (E=S, 5 ; E=Se, 6 ) and the polyferrocenyl chalcogenoesters [1,4‐{FcC(O)ECH₂}₂(C₆Me₄)] (E=S, 7 ; E=Se, 8 ), [1,3,5‐{FcC(O)ECH₂}₃(C₆Me₃)] (E=S, 9 ; E=Se, 10 ) and [1,2,4,5‐{FcC(O)ECH₂}₄(C₆H₂)] (E=S, 11 illustrated; E=Se, 12 ) are reported. The new polysilylated reagents and polyferrocenyl chalcogenoesters have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ⁷⁷Se), electrospray ionization mass spectrometry and, for complexes 1 , 2 , 3 , 4 , 7 , 8 , and 11 , single‐crystal X‐ray diffraction. The cyclic voltammograms of complexes 7 – 11 are presented.