Syntheses and Structures of Two Selenite Chloride Hydrates: Co(HSeO3)Cl · 3 H2O and Cu(HSeO3)Cl · 2 H2O

The first selenite chloride hydrates, Co(HSeO₃)Cl · 3 H₂O and Cu(HSeO₃)Cl · 2 H₂O, have been prepared from solution and characterised by single‐crystal X‐ray diffraction. The cobalt phase adopts an unusual “one‐dimensional” structure built up from vertex‐sharing pyramidal [HSeO₃]^2–, and octahedral [CoO₂(H₂O)₄]^2– and [CoO₂(H₂O)₂Cl₂]^4– units. Inter‐chain bonding is by way of hydrogen bonds or van der Waals' interactions. The atomic arrangement of the copper phase involves [HSeO₃]^2– pyramids and Jahn‐Teller distorted [CuCl₂(H₂O)₄] and [CuO₄Cl₂]^8– octahedra, sharing vertices by way of Cu–O–Se and Cu–Cl–Cu bonds. Crystal data: Co(HSeO₃)Cl · 3 H₂O, M_r = 276.40, triclinic, space group P 1 (No. 2), a = 7.1657(5) Å, b = 7.3714(5) Å, c = 7.7064(5) Å, α = 64.934(1)°, β = 68.894(1)°, γ = 71.795(1)°, V = 337.78(7) ų, Z = 2, R(F) = 0.036, wR(F) = 0.049. Cu(HSeO₃)Cl · 2 H₂O, M_r = 263.00, orthorhombic, space group Pnma (No. 62), a = 9.1488(3) Å, b = 17.8351(7) Å, c = 7.2293(3) Å, V = 1179.6(2) ų, Z = 8, R(F) = 0.021, wR(F) = 0.024.     

Catalytic and Asymmetric Fluorolactonisations of Carboxylic Acids through Anion Phase Transfer

Catalytic fluorolactonisations of aromatic carboxylic acids have been developed. The reactions proceed under mild conditions using the commercially available reagent Selectfluor. A weak phase transfer of the reagent mediated by Na₂CO₃ allows the reaction to be conducted in non‐polar solvents. Furthermore, by the use of a catalytic amount of (DHQ)₂PHAL (hydroquinine 1,4‐phthalazinediyl diether), the first asymmetric fluorolactonisation has been achieved. The corresponding isobenzofuran core can be found in many biologically active molecules.     

Fabrication of Sensitive Potentiometric Cholesterol Biosensor Based on Co3O4 Interconnected Nanowires

Highly sensitive, selective, reliable and inexpensive cholesterol biosensors are highly demanded for the routine monitoring of cholesterol molecules in order to prevent heart failure incidents. In this study, Co₃O₄ nanostructures are synthesized using polyvinyl pyrrolidone surfactant as growth template by a low temperature aqueous chemical growth method. The morphology of nanostructures was investigated by scanning electron microscopy and X‐ray diffraction techniques. The nanostructures exhibit interconnected nanowires like morphology with interconnected network of nanowires. The nanostructures of Co₃O₄ are polycrystalline. The cholesterol oxidase was physically adsorbed on the interconnected nanowires of Co₃O₄ for the chemical sensing of cholesterol molecules. The sensor device detected a wide range of cholesterol from 1×10^?7 M to 1×10^?3 M concentrations with sensitivity of ?94.031 mV/decade. A detection limit of 0.035×10^?7 M cholesterol concentration was observed and a fast response time of 10 s was also noticed. The fabricated device is highly stable, selective, sensitive, reproducible and repeatable. All the collected information about presented cholesterol biosensor indicates its potential application for the monitoring of cholesterol concentrations from human blood serum and real‐life samples.     

A general,recursive, and open‐ended response code

We present a new implementation of a recent open‐ended response theory formulation for time‐ and perturbation‐dependent basis sets (Thorvaldsen et al., J. Chem. Phys. 2008, 129, 214108) at the Hartree–Fock and density functional levels of theory. A novel feature of the new implementation is the use of recursive programming techniques, making it possible to write highly compact code for the analytic calculation of any response property at any valid choice of rule for the order of perturbation at which to include perturbed density matrices. The formalism is expressed in terms of the density matrix in the atomic orbital basis, allowing the recursive scheme presented here to be used in linear‐scaling formulations of response theory as well as with two‐ and four‐component relativistic wave functions. To demonstrate the new code, we present calculations of the third geometrical derivatives of the frequency‐dependent second hyperpolarizability for HSOH at the Hartree–Fock level of theory, a seventh‐order energy derivative involving basis sets that are both time and perturbation dependent. © 2014 Wiley Periodicals, Inc.     

Determination of conditional stability constants for some divalent transition metal ion‐EDTA complexes by electrospray ionization mass spectrometry

Conditional stability constants of coordination complexes comprising divalent transition metals, Cu²⁺, Ni²⁺, Zn²⁺, Co²⁺, and ethylenediaminetetraacetic acid (EDTA) were determined utilizing electrospray ionization mass spectrometry. The deviation of signal response of a reference complex was monitored at addition of a second metal ion. The conditional stability constant for the competing metal was then determined through solution equilibria equations. The method showed to be applicable to a system where Co²⁺ and Zn²⁺ competed for EDTA at pH 5. When Cu²⁺ and Ni²⁺ competed for EDTA, the equilibrium changed over time. This change was shown to be affected in rate and size by the type of organic solvent added. In this work, 30% of either methanol or acetonitrile was used. It was found that if calibration curves are prepared for both metal complexes in solution and the measurements are repeated with sufficient time space, any change in equilibrium of sample solutions will be discovered. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of oxygenated and native polycyclic aromatic hydrocarbons in urban dust and diesel particulate matter standard reference materials using pressurized liquid extraction and LC–GC/MS

The objective of this study was to develop a novel analytical chemistry method, comprised of a coupled high-performance liquid chromatography–gas chromatography/mass spectrometry system (LC–GC/MS) with low detection limits and high selectivity, for the identification and determination of oxygenated polycyclic aromatic hydrocarbons (OPAHs) and polycyclic aromatic hydrocarbons (PAHs) in urban air and diesel particulate matter. The linear range of the four OPAHs, which include 9,10-anthraquinone, 4H-cyclopenta[def]phenanthrene-4-one, benzanthrone, and 7,12-benz[a]anthraquinone, was 0.7 pg–43.3 ng with limits of detection (LODs) and limits of quantification (LOQs) on the order of 0.2–0.8 and 0.7–1.3 pg, respectively. The LODs in this study are generally lower than values reported in the literature, which can be explained by using large-volume injection. The recoveries of the OPAHs spiked onto glass fiber filters using two different pressurized liquid extraction (PLE) methods were in the ranges of 84–107 and 67–110 %, respectively. The analytical protocols were validated using the following National Institute of Standards and Technology standard reference materials: SRM 1649a (Urban Dust), SRM 1650b (Diesel Particulate Matter), and SRM 2975 (Diesel Particulate Matter, Industrial Forklift). The measured mass fractions of the OPAHs in the standard reference materials (SRMs) in this present study are higher than the values from the literature, except for benzanthrone in SRM 1649a (Urban Dust). In addition to the OPAHs, 44 PAHs could be detected and quantified from the same particulate extract used in this protocol. Using data from the literature and applying a two-sided t test at the 5 % level using Bonferroni correction, significant differences were found between the tested PLE methods for individual PAHs. However, the measured mass fractions of the PAHs were comparable, similar to, or higher than those previously reported in the literature.     

The effect of Fenton chemistry on the properties of microfibrillated cellulose

A fully bleached birch kraft pulp was treated with acidic hydrogen peroxide in the presence of ferrous ions (Fenton’s reagent) and thereafter treated mechanically in a colloid mill to produce a product containing microfibrillated cellulose (MFC). The produced MFC products were chemically and morphologically characterized and compared with MFC products produced without pretreatment as well as with enzymatic hydrolysis. Fenton treatment resulted in an increase in total charge and number of carbonyl groups while the intrinsic viscosity decreased. The Fenton treated pulps were easier to process mechanically i.e. they reached a higher specific surface area at a given mechanical treatment time and the MFC produced had a stable water-fibre suspension for at least 8 weeks compared to enzymatic pretreated pulps and pulps not subjected to any pretreatment.