Aminophosphinic Acids in a Pyridine Series: Cleavage of Pyridine-2- and Pyridine-4-methyl(amino)phosphinic Acids in Acidic Solutions

The synthesis of a series of new pyridine aminomethylphosphinic acids is described. These compounds were obtained in the reaction of the corresponding pyridine aldehydes with primary amines and with ethyl phenylphosphinate, or methylphosphinate, in the presence of bromotrimethylsilane. In aqueous, strong acid solutions, pyridine aminophosphinic acids were split, forming the phenyl-, or methylphosphonic, acid and the corresponding secondary pyridyl-alkylamines. The kinetics of some observed cleavages were measured, and a mechanism of the cleavage has been proposed.     

Gas-Phase Fragmentation of Oligoproline Peptide Ions Lacking Easily Mobilizable Protons

The fragmentation of peptides containing quaternary ammonium group, but lacking easily mobilizable protons, was examined with the aid of deuterium-labeled analogs and quantum-chemical modeling. The fragmentation of oligoproline containing quaternary ammonium group involves the mobilization of hydrogens localized at α- and γ- or δ-carbon atoms in the pyrrolidine ring of proline. The study of the dissociation pattern highlights the unusual proline residue behavior during MS/MS experiments of peptides.      

Usefulness of chaotropic salt additive in RP‐HPLC of organic nonionized compounds

New synthesized 1,4‐disubstituted thiosemicarbazide derivatives were analyzed in the RP system, modified with the addition of salts; chaotropic (sodium hexafluorophosphate – Na PF₆), cosmotropic (sodium phosphate – NaH₂PO₄), and neutral (NaCl) on Zorbax XDB C18 column. The effect of the eluent composition on the analytes retention (k), system efficiency (N), peak symmetry (A_s), and LOD values were all examined and compared to unmodified organic‐aqueous mobile phase system. It was established that eluent modified with chaotropic salts addition was also the most advantageous according to other peak parameters such as the theoretical plates numbers and asymmetry factors. The lower LOD values were achieved in comparison to unmodified organic‐aqueous eluent system. Compatibility of lipophilicity parameters calculated by the use of computer software with experimental ones measured by RP‐HPLC was also the best for chaotropic modified mobile phase. To explain the observed phenomena, molecular modeling was performed for chosen representative compound in different environment representing examined mobile phase composition.     

Synthesis and characterisation of PEG-peptide surfaces for proteolytic enzyme detection

Peptide surfaces were obtained by the covalent immobilisation of fluorescently labelled pentapeptides carboxyfluorescein–glycine–arginine–methionine–leucine–glycine, either directly or through a poly(ethylene glycol) (PEG) linker on modified silicon wafers. Each step during the preparation of the peptide surfaces was confirmed by several surface characterisation techniques. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy were used to determine the surface composition, the wafers philicity was measured by contact angle and atomic force microscopy was used to investigate the surface morphology. Exposure of the peptide surfaces to trypsin resulted in the release of a fluorescently labelled peptide product, which allowed the kinetics of the enzymatic reaction to be followed with the aid of fluorescence spectroscopy. The electrospray ionisation mass spectrometry analysis of the post-digestion solution confirmed that the pentapeptides attached to the solid support undergo specific trypsin hydrolysis at the C-terminus of the arginine residues. Detailed surface analyses before and after the enzyme action was performed using ToF-SIMS. Because of the limited accessibility of the short peptide directly attached to the surface, a quantitative yield of enzymatic hydrolysis was observed only in case when the peptide was bound through the PEG linker. The insertion of the PEG linker increased the number of immobilised peptides and the rate of enzymatic digestion which consequently improved the quality of the enzyme assays. The described approach may be used for different peptide sequences designed for other proteases.

Micro-TLC Approach for Fast Screening of Environmental Samples Derived from Surface and Sewage Waters

In this work we demonstrated analytical capability of micro-planar (micro-TLC) technique comprising one and two-dimensional (2D) separation modes to generate fingerprints of environmental samples originated from sewage and ecosystems waters. We showed that elaborated separation and detection protocols are complementary to previously invented HPLC method based on temperature-dependent inclusion chromatography and UV-DAD detection. Presented 1D and 2D micro-TLC chromatograms of SPE (solid-phase extraction) extracts were optimized for fast and low-cost screening of water samples collected from lakes and rivers located in the area of Middle Pomerania in northern part of Poland. Moreover, we studied highly organic compounds loaded in the treated and untreated sewage waters obtained from municipal wastewater treatment plant “Jamno” near Koszalin City (Poland). Analyzed environmental samples contained number of substances characterized by polarity range from estetrol to progesterone as well as chlorophyll-related dyes previously isolated and pre-purified by simple SPE protocol involving C18 cartridges. Optimization of micro-TLC separation and quantification protocols of such samples were discussed from the practical point of view using simple separation efficiency criteria including total peaks number, log(product ΔhR _F), signal intensity and peak asymmetry. Outcomes of the presented analytical approach, especially using detection involving direct fluorescence (UV366/Vis) and phosphomolybdic acid (PMA) visualization are compared with UV-DAD HPLC-generated data reported previously. Chemometric investigation based on principal components analysis revealed that SPE extracts separated by micro-TLC and detected under fluorescence and PMA visualization modes can be used for robust sample fingerprinting even after long-term storage of the extracts (up to 4 years) at subambient temperature (?20 °C). Such approach allows characterization of wide range of sample components that are present in given extract in high and middle concentration range. Due to protocol simplicity and low cost of analysis this method can be useful for preliminary sample screening.     

Catalytic Oxidative Cyclocondensation of o‐Aminophenols to 2‐Amino‐3H‐phenoxazin‐3‐ones

The catalytic oxidative cyclocondensation of the o‐aminophenols 1a–f was investigated. The oxidants used were air/laccase, H₂O₂/horseradish peroxidase, H₂O₂/ebselen (3), and TBHP/diphenyl diselenide 4. The products obtained were 2‐amino‐3H‐phenoxazin‐3‐one—questiomycin A, its derivative 2b, and cinnabarinic acid and actinocin (2c,d). Substrates with methyl groups at 4 and 5 positions of benzene ring were converted to different dihydrophenoxazinones 2g,h. Compounds having chlorine atoms at the same positions underwent oxidation to planar phenoxa-zinones 2e,f with elimination of one hydrochloride molecule.     

Stability of 47Sc-complexes with acyclic polyamino-polycarboxylate ligands

The aim of this study was to evaluate acyclic ligands which can be applied for labeling proteins such as monoclonal antibodies and their fragments with scandium radionuclides. Recently, scandium isotopes (⁴⁷Sc, ⁴⁴Sc) are more available and their properties are convenient for radiotherapy or PET imaging. They can be used together as “matched pair” in theranostic approach. Because proteins denaturize at temperature above 42 °C, ligands which efficiently form complexes at room temperature, are necessary for labelling such biomolecules. For complexation of scandium radionuclides open chain ligands DTPA, HBED, BAPTA, EGTA, TTHA and deferoxamine have been chosen. We found that the ligands studied (except HBED) form strong complexes within 10 min and that the radiolabelling yield varies between 96 and 99 %. The complexes were stable in isotonic NaCl, but stability of ⁴⁶Sc-TTHA, ⁴⁶Sc-BAPTA and ⁴⁶Sc-HBED in PBS buffer was low, due to formation by Sc³⁺stronger complexes with phosphates than with the studied ligands. From the radiolabelling studies with n.c.a. ⁴⁷Sc we can conclude that the most stable complexes are formed by the 8-dentate DTPA and EGTA ligands.     

Decomposition of meta- and para-phenylphenol during ozonation process

The decomposition of meta-phenylphenol (m-PP) and para-phenylphenol (p-PP) in a heterogeneous gas-liquid system using ozone was investigated. The influence of different reaction parameters such as ozone and PP isomers concentration as well as pH and temperature of the reaction mixture on the PP decay rate was determined. The second-order rate constants for the direct reaction of molecular ozone, determined in a homogeneous system, were (5.85 ± 0.35) × 10² M^?1 s^?1 and (8.90 ± 0.33) × 10² M^?1 s^?1 for m-PP and p-PP, respectively. The rate constants for the reaction of m-PP and p-PP with ozone increased with increasing pH. The reaction rate constants with ozone were found to be (1.75 ± 0.02) × 10⁹ M^?1 s^?1 and (1.86 ± 0.02) × 10⁹ M^?1 s^?1 for m-PP and p-PP anions, respectively.     

Synthesis and Structure of 2‐Hydroxy‐2‐Methyl‐1,3‐Bis‐(Methyl 3′,4′,6′‐Tri‐O‐Acetyl‐β‐D‐Glucopyranosid‐2‐yl)‐Imidazolidine‐4,5‐Dione

The title compound was synthesized starting from methyl 3,4,6‐tri‐O‐acetyl‐2‐acetamido‐2‐deoxy‐β‐D‐glucopyranoside, oxalyl chloride, and methyl 3,4,6‐tri‐O‐acetyl‐2‐amino‐2‐deoxy‐β‐D‐glucopyranoside. The crystal and molecular structure of the obtained imidazolidine‐4,5‐dione have been determined by X‐ray analysis as well as ¹H and ¹³C NMR spectroscopy.     

Speciation analysis of chromium in drinking water samples by ion-pair reversed-phase HPLC–ICP-MS: validation of the analytical method and evaluation of the uncertainty budget

The approach presented in this article refers to the modification of a method for the detection and quantitative determination of chromium species in water by high-performance liquid chromatography inductively coupled plasma mass spectrometry. The main aim of this work was to establish a detailed validation of the analytical procedure and an estimation of the budget of measurement uncertainty which was helpful in recognizing the critical points of the presented method. As a result of the method validation experiment, the obtained limit of quantification, repeatability and intermediate precision were satisfied for the quantification Cr(III) and Cr(VI) in water matrices. The trueness of the method was verified via an estimation of the recovery of the spiked real samples. The recovery rate of both determined analytes was found to be between 93 and 115 %. Considering that the validation of the method and the evaluation of measurement uncertainty are crucial for quantitative analysis, the above-mentioned assessment of the uncertainty budget was performed in two different ways: a modelling approach and a single-laboratory validation approach. The measurement uncertainties of the results were found to be 4.4 and 7.8 % for Cr(III), 4.2 and 7.9 % for Cr(VI) using the classical concept and method validation data, respectively. This paper is the first publication to presenting all the steps needed to evaluate the measurement uncertainty for the speciation analysis of chromium species. In summary, the obtained results demonstrate that the method can be applied effectively for its intended use.