Influence of the chelate ligand structure on the amide methanolysis reactivity of mononuclear zinc complexes

Zinc complexes of three new amide-appended ligands have been prepared and isolated. These complexes, [(dpppa)Zn](ClO4)2 (4(ClO4)2; dpppa = N-((N,N-diethylamino)ethyl)-N-((6-pivaloylamido-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine), [(bdppa)Zn](ClO4)2 (6(ClO4)2; bdppa = N,N-bis((N,N-diethylamino)ethyl)-N-((6-pivaloylamido-2-pyridyl)methyl)amine), and [(epppa)Zn](ClO4)2 (8(ClO4)2; epppa = N-((2-ethylthio)ethyl)-N-((6-pivaloylamido-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine), have been characterized by X-ray crystallography (4(ClO4)2 and 8(ClO4)2), 1H and 13C NMR, IR, and elemental analysis. Treatment of 4(ClO4)2 or 8(ClO4)2 with 1 equiv of Me4NOH.5H2O in methanol-acetonitrile (5:3) results in amide methanolysis, as determined by the recovery of primary amine-appended forms of the chelate ligand following removal of the zinc ion. These reactions proceed via the initial formation of a deprotonated amide intermediate ([(dpppa-)Zn]ClO4 (5) and [(epppa-)Zn]ClO4 (9)) which in each case has been isolated and characterized (1H and 13C NMR, IR, elemental analysis). Treatment of 6(ClO4)2 with Me4NOH.5H2O in methanol-acetonitrile results in the formation of a deprotonated amide complex, [(bdppa-)Zn]ClO4 (7), which was isolated and characterized. This complex does not undergo amide methanolysis after prolonged heating in a methanol-acetonitrile mixture. Kinetic studies and construction of Eyring plots for the amide methanolysis reactions of 4(ClO4)2 and 8(ClO4)2 yielded thermodynamic parameters that provide a rationale for the relative rates of the amide methanolysis reactions. Overall, we propose that the mechanistic pathway for these amide methanolysis reactions involves reaction of the deprotonated amide complex with methanol to produce a zinc methoxide species, the reactivity of which depends, at least in part, on the steric hindrance imparted by the supporting chelate ligand. Amide methanolysis involving a zinc complex supported by a N2S2 donor chelate ligand (3(ClO4)2) is more complicated, as in addition to the formation of a deprotonated amide intermediate free chelate ligand is present in the reaction mixture.     

Electronic circular dichroism of disulphide bridge: ab initio quantum-chemical calculations

Electronic circular dichroism (ECD) parameters of the disulphide chromophore have been calculated for dihydrogen disulphide, dimethyl disulphide, and cystine using density-functional theory, coupled-cluster theory, and multiconfigurational self-consistent field theory. The objective is twofold: first, to examine the performance of the Coulomb-attenuated CAM-B3LYP functional for the calculation of ECD spectra; second, to investigate the dependence of the ECD parameters on the conformation around the disulphide bridge. The CAM-B3LYP functional improves considerably on the B3LYP functional, giving results comparable to CCSD theory and to MCSCF theory in an extended active space. The conformational dependence of the ECD parameters does not change much upon substitution, which is promising for the application of ECD in structural investigations of proteins containing disulphide bridges.     

Brønsted acids as additives for the direct asymmetric aldol reaction catalyzed by l-prolinethioamides. direct evidence for enamine-iminium catalysis

The use of protonated l-prolinethioamide instead of the free base derivative 1 as the organocatalyst for the direct aldol addition has a profound and appreciable effect on both the yield and the stereochemical course of the reaction. 4-Nitrobenzaldehyde (2) reacts with acetone in the presence of the protonated catalyst 1.TFA, affording aldol product 3 with a yield up to 99% and an ee up to 98%. The catalyst loading can be lowered to 2.5 mol %. More than 20 different acids were investigated as an additive, and its role as cocatalyst has been discussed. Furthermore, reactions of l-prolinethioamide salts with acetone have been monitored using ESI-MS and 1H NMR techniques, giving insight into the mechanism of the direct aldol reaction. The presumed formation of the iminium salt 10 has been unambiguously confirmed.     

pH responsiveness of block copolymer vesicles with a polypeptide corona

The aggregation behavior of polybutadiene165-block-poly(L-lysine)88 in saline solution was studied by combined static and dynamic light scattering analyses. Vesicles were observed if the polypeptide segment was in a 100% coil conformation (pH 7.0) or in an 80% alpha-helical conformation (pH 10.3). At the higher pH, aggregates were smaller in size (hydrodynamic radius: 364 nm --> 215 nm) and chains were more densely packed at the core-corona interface (interchain distance: 3.2 nm --> 2.4 nm). Changes in size and structure could be explained in basic terms of colloid stabilization without considering a secondary structure effect.     

Time Evolution of Microbial Composition and Metabolic Profile for Biogenic Amines and Free Amino Acids in a Model Cucumber Fermentation System Brined with 0.5% to 5.0% Sodium Chloride

Salt concentrations in brine and temperature are the major environmental factors that affect activity of microorganisms and, thus may affect formation of biogenic amines (BAs) during the fermentation process. A model system to ferment cucumbers with low salt (0.5%, 1.5% or 5.0% NaCl) at two temperatures (11 or 23 °C) was used to study the ability of indigenous microbiota to produce biogenic amines and metabolize amino acid precursors. Colony counts for presumptive Enterococcus and Enterobacteriaceae increased by 4 and up to 2 log of CFU∙mL⁻¹, respectively, and remained viable for more than 10 days. 16S rRNA sequencing showed that Lactobacillus and Enterobacter were dominant in fermented cucumbers with 0.5% and 1.5% salt concentrations after storage. The initial content of BAs in raw material of 25.44 ± 4.03 mg∙kg⁻¹ fluctuated throughout experiment, but after 6 months there were no significant differences between tested variants. The most abundant BA was putrescine, that reached a maximum concentration of 158.02 ± 25.11 mg∙kg⁻¹. The Biogenic Amines Index (BAI) calculated for all samples was significantly below that needed to induce undesirable effects upon consumption. The highest value was calculated for the 23 °C/5.0% NaCl brine variant after 192 h of fermentation (223.93 ± 54.40). Results presented in this work indicate that possibilities to control spontaneous fermentation by changing salt concentration and temperature to inhibit the formation of BAs are very limited.     

Modulating Properties of Piroxicam,Meloxicam and Oxicam Analogues against Macrophage-Associated Chemokines in Colorectal Cancer

The mechanisms underlying the antineoplastic effects of oxicams have not been fully elucidated. We aimed to assess the effect of classic and novel oxicams on the expression/secretion of macrophage-associated chemokines (RTqPCR/Luminex xMAP) in colorectal adenocarcinoma cells, and on the expression of upstream the non-steroidal anti-inflammatory drug (NSAID)-activated genes NAG1, NFKBIA, MYD88, and RELA, as well as at the chemokine profiling in colorectal tumors. Meloxicam downregulated CCL4 9.9-fold, but otherwise the classic oxicams had a negligible/non-significant effect. Novel analogues with a thiazine ring substituted with arylpiperazine and benzoyl moieties significantly modulated chemokine expression to varying degree, upregulated NAG1 and NFKBIA, and downregulated MYD88. They inhibited CCL3 and CCL4, and their effect on CCL2 and CXCL2 depended on the dose and exposure. The propylene linker between thiazine and piperazine nitrogens and one arylpiperazine fluorine substituent characterized the most effective analogue. Only CCL19 and CXCL2 were not upregulated in tumors, nor was CXCL2 in tumor-adjacent tissue compared to normal mucosa. Compared to adjacent tissue, CCL4 and CXCL2 were upregulated, while CCL2, CCL8, and CCL19 were downregulated in tumors. Tumor CCL2 and CCL7 increased along with advancing T and CCL3, and CCL4 along with the N stage. The introduction of arylpiperazine and benzoyl moieties into the oxicam scaffold yields effective modulators of chemokine expression, which act by upregulating NAG1 and interfering with NF-κB signaling.     

Synthesis and Preliminary Anticancer Activity Assessment of N-Glycosides of 2-Amino-1,3,4-thiadiazoles

The addition of 2-amino-1,3,4-thiadiazole derivatives with parallel iodination of differently protected glycals has been achieved using a double molar excess of molecular iodine under mild conditions. The corresponding thiadiazole derivatives of N-glycosides were obtained in good yields and anomeric selectivity. The usage of iodine as a catalyst makes this method easy, inexpensive, and successfully useable in reactions with sugars. Thiadiazole derivatives were tested in a panel of three tumor cell lines, MCF-7, HCT116, and HeLa. These compounds initiated biological response in investigated tumor models in a different rate. The MCF-7 is resistant to the tested compounds, and the cytometry assay indicated low increase in cell numbers in the sub- G1 phase. The most sensitive are HCT-116 and HeLa cells. The thiadiazole derivatives have a pro-apoptotic effect on HCT-116 cells. In the case of the HeLa cells, an increase in the number of cells in the sub-G1- phase and the induction of apoptosis was observed.     

Characterisation of multi-extruded poly(lactic acid)

The effect of multiple (up to 10 times) extrusion of polylactide on its mechanical properties (determined by a static tension test), Charpy impact strength, melt flow rate, phase transition temperatures, degradation temperature, and permeability of water vapour and oxygen is presented. It was found that, with raising the number of the extrusion cycles, the tensile strength at break slightly diminished and the impact strength clearly decreased, while the melt flow rate and water vapour and oxygen transmission rates steadily increased. Variation of the number of extrusion cycles did not affect the glass transition temperature, whereas it did cause a lowering of the cold crystallisation temperature and slight diminishing of the melting point. The presented results indicate that PLA technological waste is suitable to be reused as an additive to a neat polymer.