Micro-TLC Approach for Fast Screening of Environmental Samples Derived from Surface and Sewage Waters

In this work we demonstrated analytical capability of micro-planar (micro-TLC) technique comprising one and two-dimensional (2D) separation modes to generate fingerprints of environmental samples originated from sewage and ecosystems waters. We showed that elaborated separation and detection protocols are complementary to previously invented HPLC method based on temperature-dependent inclusion chromatography and UV-DAD detection. Presented 1D and 2D micro-TLC chromatograms of SPE (solid-phase extraction) extracts were optimized for fast and low-cost screening of water samples collected from lakes and rivers located in the area of Middle Pomerania in northern part of Poland. Moreover, we studied highly organic compounds loaded in the treated and untreated sewage waters obtained from municipal wastewater treatment plant “Jamno” near Koszalin City (Poland). Analyzed environmental samples contained number of substances characterized by polarity range from estetrol to progesterone as well as chlorophyll-related dyes previously isolated and pre-purified by simple SPE protocol involving C18 cartridges. Optimization of micro-TLC separation and quantification protocols of such samples were discussed from the practical point of view using simple separation efficiency criteria including total peaks number, log(product ΔhR _F), signal intensity and peak asymmetry. Outcomes of the presented analytical approach, especially using detection involving direct fluorescence (UV366/Vis) and phosphomolybdic acid (PMA) visualization are compared with UV-DAD HPLC-generated data reported previously. Chemometric investigation based on principal components analysis revealed that SPE extracts separated by micro-TLC and detected under fluorescence and PMA visualization modes can be used for robust sample fingerprinting even after long-term storage of the extracts (up to 4 years) at subambient temperature (?20 °C). Such approach allows characterization of wide range of sample components that are present in given extract in high and middle concentration range. Due to protocol simplicity and low cost of analysis this method can be useful for preliminary sample screening.     

Catalytic Oxidative Cyclocondensation of o‐Aminophenols to 2‐Amino‐3H‐phenoxazin‐3‐ones

The catalytic oxidative cyclocondensation of the o‐aminophenols 1a–f was investigated. The oxidants used were air/laccase, H₂O₂/horseradish peroxidase, H₂O₂/ebselen (3), and TBHP/diphenyl diselenide 4. The products obtained were 2‐amino‐3H‐phenoxazin‐3‐one—questiomycin A, its derivative 2b, and cinnabarinic acid and actinocin (2c,d). Substrates with methyl groups at 4 and 5 positions of benzene ring were converted to different dihydrophenoxazinones 2g,h. Compounds having chlorine atoms at the same positions underwent oxidation to planar phenoxa-zinones 2e,f with elimination of one hydrochloride molecule.     

Stability of 47Sc-complexes with acyclic polyamino-polycarboxylate ligands

The aim of this study was to evaluate acyclic ligands which can be applied for labeling proteins such as monoclonal antibodies and their fragments with scandium radionuclides. Recently, scandium isotopes (⁴⁷Sc, ⁴⁴Sc) are more available and their properties are convenient for radiotherapy or PET imaging. They can be used together as “matched pair” in theranostic approach. Because proteins denaturize at temperature above 42 °C, ligands which efficiently form complexes at room temperature, are necessary for labelling such biomolecules. For complexation of scandium radionuclides open chain ligands DTPA, HBED, BAPTA, EGTA, TTHA and deferoxamine have been chosen. We found that the ligands studied (except HBED) form strong complexes within 10 min and that the radiolabelling yield varies between 96 and 99 %. The complexes were stable in isotonic NaCl, but stability of ⁴⁶Sc-TTHA, ⁴⁶Sc-BAPTA and ⁴⁶Sc-HBED in PBS buffer was low, due to formation by Sc³⁺stronger complexes with phosphates than with the studied ligands. From the radiolabelling studies with n.c.a. ⁴⁷Sc we can conclude that the most stable complexes are formed by the 8-dentate DTPA and EGTA ligands.     

Decomposition of meta- and para-phenylphenol during ozonation process

The decomposition of meta-phenylphenol (m-PP) and para-phenylphenol (p-PP) in a heterogeneous gas-liquid system using ozone was investigated. The influence of different reaction parameters such as ozone and PP isomers concentration as well as pH and temperature of the reaction mixture on the PP decay rate was determined. The second-order rate constants for the direct reaction of molecular ozone, determined in a homogeneous system, were (5.85 ± 0.35) × 10² M^?1 s^?1 and (8.90 ± 0.33) × 10² M^?1 s^?1 for m-PP and p-PP, respectively. The rate constants for the reaction of m-PP and p-PP with ozone increased with increasing pH. The reaction rate constants with ozone were found to be (1.75 ± 0.02) × 10⁹ M^?1 s^?1 and (1.86 ± 0.02) × 10⁹ M^?1 s^?1 for m-PP and p-PP anions, respectively.     

Synthesis and Structure of 2‐Hydroxy‐2‐Methyl‐1,3‐Bis‐(Methyl 3′,4′,6′‐Tri‐O‐Acetyl‐β‐D‐Glucopyranosid‐2‐yl)‐Imidazolidine‐4,5‐Dione

The title compound was synthesized starting from methyl 3,4,6‐tri‐O‐acetyl‐2‐acetamido‐2‐deoxy‐β‐D‐glucopyranoside, oxalyl chloride, and methyl 3,4,6‐tri‐O‐acetyl‐2‐amino‐2‐deoxy‐β‐D‐glucopyranoside. The crystal and molecular structure of the obtained imidazolidine‐4,5‐dione have been determined by X‐ray analysis as well as ¹H and ¹³C NMR spectroscopy.     

Speciation analysis of chromium in drinking water samples by ion-pair reversed-phase HPLC–ICP-MS: validation of the analytical method and evaluation of the uncertainty budget

The approach presented in this article refers to the modification of a method for the detection and quantitative determination of chromium species in water by high-performance liquid chromatography inductively coupled plasma mass spectrometry. The main aim of this work was to establish a detailed validation of the analytical procedure and an estimation of the budget of measurement uncertainty which was helpful in recognizing the critical points of the presented method. As a result of the method validation experiment, the obtained limit of quantification, repeatability and intermediate precision were satisfied for the quantification Cr(III) and Cr(VI) in water matrices. The trueness of the method was verified via an estimation of the recovery of the spiked real samples. The recovery rate of both determined analytes was found to be between 93 and 115 %. Considering that the validation of the method and the evaluation of measurement uncertainty are crucial for quantitative analysis, the above-mentioned assessment of the uncertainty budget was performed in two different ways: a modelling approach and a single-laboratory validation approach. The measurement uncertainties of the results were found to be 4.4 and 7.8 % for Cr(III), 4.2 and 7.9 % for Cr(VI) using the classical concept and method validation data, respectively. This paper is the first publication to presenting all the steps needed to evaluate the measurement uncertainty for the speciation analysis of chromium species. In summary, the obtained results demonstrate that the method can be applied effectively for its intended use.     

Determination of ascorbic acid and its degradation products by high‐performance liquid chromatography‐triple quadrupole mass spectrometry

This study describes application of liquid chromatography coupled with triple quadrupole mass spectrometry (LC‐MS) for evaluation of vitamin C stability, the objective being prediction of the degradation products. Detection was performed with an UV detector (UV‐Vis) in sequence with a triple‐quad mass spectrometer in the multiple reaction mode. The negative ion mode of ESI and MS‐MRM transitions of m/z 175→115 (quantifier) and 175→89 (qualifier) for ascorbic acid was used. All the validation parameters were within the range of acceptance proposed by the Food and Drug Administration. The method was fully validated in terms of linearity, LOD, LOQ, accuracy, and interday precision. Validation experiments revealed good linearity with R² = 0.999 within the established concentration range, and excellent repeatability (9.3%). The LOD of the method was 0.1524 ng/mL whereas the LOQ was 0.4679 ng/mL. LC‐MS methodology proves to be an improved, simple, and fast approach to determining the content of vitamin C and its degradation products with high sensitivity, selectivity, and resolving power within 6 minutes of analysis.     

Unusual potassium-oxalate coordination in the two-dimensional trimetallic [CoCl(NH3)5][KCr(C2O4)3]·0.5H2O complex

A new heterometallic compound, [CoCl(NH₃)₅][KCr(C₂O₄)₃]·0.5H₂O (1), has been synthesized and characterized by elemental analysis, IR and electronic spectra, thermal analysis, variable temperature magnetic susceptibility measurements, and single crystal X-ray diffraction. Compound 1 consists of two-dimensional [{KCr(C₂O₄)₃}_n]^2n? layers, [CoCl(NH₃)₅]²⁺ ions and water molecules. Within the 2-D layer, three different types of oxalate coordination modes are present. Each K cation is coordinated by eight oxygen atoms from oxalate groups and also weakly interacts with the ninth oxygen atom. The extensive network of hydrogen bond is formed between the [KCr(C₂O₄)₃]^2? layer and the [CoCl(NH₃)₅]²⁺ ions. These interactions involve all hydrogen atoms of ammonia ligads and water molecule.     

Conventional and Organic Honeys as a Source of Water- and Ethanol-Soluble Molecules with Nutritional and Antioxidant Characteristics

The benefits of natural honeybee products (e.g., honey, royal jelly, beeswax, propolis, beevenom and pollen) to the immune system are remarkable, and many of them are involved in the induction of antibody production, maturation of immune cells and stimulation of the immune system. The type of plants in the geographical area, climatic conditions and production method have a significantly influence on the nutritional quality of honey. However, this variability can influence consumer liking by the sensory attributes of the product. The aim of this work was to compare the most popular honeys from Poland in terms of nutritional value, organoleptic properties and antioxidant activity. In the study, five varieties of honey (honeydew, forest, buckwheat, linden and dandelion) from conventional and organic production methods were tested. The nutritional characteristics of honey samples included acidity, content of water, sugars, vitamin C, HMF and phenolics (total and flavonoids), while honey color, taste, aroma and consistency were investigated in the organoleptic characteristics. The antioxidant activity was determined in water- and ethanol-soluble honey extracts using DPPH and ORAC tests. The results showed that organoleptic and nutritional characteristics of popular Polish honeys differ significantly in relation to plant source and production method. The significant effect of honey variety on the content of HMF, saccharose and phenolics, as well as acidity and antioxidant capacity were noted. The impact of variety and variety × production method interaction was significant in the case of the content of vitamin C, glucose and fructose. A visible difference of buckwheat and forest honeys from other samples was observed. The highest content of total phenolics with antioxidant activity based on the SET mechanism was found in buckwheat honeys, while forest honeys were richer in flavonoids.     

Twist-Bend Nematic Glasses: The Synthesis and Characterisation of Pyrene-based Nonsymmetric Dimers

A selection of pyrene-based liquid crystal dimers have been prepared, containing either methylene-ether or diether linked spacers of varying length and parity. All the diether linked materials, CBOnO.Py (n=5, 6, 11, 12), exhibit conventional nematic and smectic A phases, with the exception of CBO11O.Py which is exclusively nematic. The methylene-ether linked dimer, CBnO.Py, with an even-membered spacer (n=5) was solely nematogenic, but odd-members (n=6, 8, 10) exhibited both nematic and twist-bend nematic phases. Replacement of the cyanobiphenyl fragment by cyanoterphenyl giving CT6O.Py, gave elevated melting and nematic-isotropic transition temperatures, and SmA and SmC_A phases were observed on cooling the nematic phase. Intermolecular face-to-face associations of the pyrene moieties drive glass formation, and all these materials have a glass transition temperature at or above room temperature. The stability of the glassy twist-bend nematic phase allowed for its study using AFM, and the helical pitch length, P_TB, was measured as 6.3 and 6.7 nm for CB6O.Py and CB8O.Py, respectively. These values are comparable to the shortest pitch of a twist-bend nematic phase measured to date.