Synthesis and Preliminary Anticancer Activity Assessment of N-Glycosides of 2-Amino-1,3,4-thiadiazoles

The addition of 2-amino-1,3,4-thiadiazole derivatives with parallel iodination of differently protected glycals has been achieved using a double molar excess of molecular iodine under mild conditions. The corresponding thiadiazole derivatives of N-glycosides were obtained in good yields and anomeric selectivity. The usage of iodine as a catalyst makes this method easy, inexpensive, and successfully useable in reactions with sugars. Thiadiazole derivatives were tested in a panel of three tumor cell lines, MCF-7, HCT116, and HeLa. These compounds initiated biological response in investigated tumor models in a different rate. The MCF-7 is resistant to the tested compounds, and the cytometry assay indicated low increase in cell numbers in the sub- G1 phase. The most sensitive are HCT-116 and HeLa cells. The thiadiazole derivatives have a pro-apoptotic effect on HCT-116 cells. In the case of the HeLa cells, an increase in the number of cells in the sub-G1- phase and the induction of apoptosis was observed.     

Twist-Bend Nematic Glasses: The Synthesis and Characterisation of Pyrene-based Nonsymmetric Dimers

A selection of pyrene-based liquid crystal dimers have been prepared, containing either methylene-ether or diether linked spacers of varying length and parity. All the diether linked materials, CBOnO.Py (n=5, 6, 11, 12), exhibit conventional nematic and smectic A phases, with the exception of CBO11O.Py which is exclusively nematic. The methylene-ether linked dimer, CBnO.Py, with an even-membered spacer (n=5) was solely nematogenic, but odd-members (n=6, 8, 10) exhibited both nematic and twist-bend nematic phases. Replacement of the cyanobiphenyl fragment by cyanoterphenyl giving CT6O.Py, gave elevated melting and nematic-isotropic transition temperatures, and SmA and SmC_A phases were observed on cooling the nematic phase. Intermolecular face-to-face associations of the pyrene moieties drive glass formation, and all these materials have a glass transition temperature at or above room temperature. The stability of the glassy twist-bend nematic phase allowed for its study using AFM, and the helical pitch length, P_TB, was measured as 6.3 and 6.7 nm for CB6O.Py and CB8O.Py, respectively. These values are comparable to the shortest pitch of a twist-bend nematic phase measured to date.     

Structural and Optical Properties of Pure and Sulfur-Doped Silicate–Phosphate Glass

A series of silicate–phosphate glass materials from the SiO₂-P₂O₅-K₂O-MgO system (pure and doped with sulfur ions) were synthesized by melting raw material mixtures that contained activated carbon as a reducer. The bulk composition of glass was confirmed with X-ray fluorescence spectroscopy. The homogeneity of the glass was confirmed through elemental mapping at the microstructural level with scanning electron microscopy combined with an analysis of the microregions with energy-dispersive X-ray spectroscopy. The structural and optical properties of the glass were studied by using spectroscopic techniques. The infrared spectroscopy studies that were conducted showed that the addition of sulfur caused changes in the silicate–phosphate networks, as they became more polymerized, which was likely related to the accumulation of potassium near the sulfur ions. By using irradiation with an optical parametric oscillator (OPO) nanosecond laser system operating at the second harmonic wavelength, the glass samples emitted a wide spectrum of luminescence, peaking at about 700 nm when excited by UV light (210–280 nm). The influence of the glass composition and the laser-processing parameters on the emission characteristics is presented and discussed. This work also referred to the density, molar volume, and theoretical optical basicity of pure and sulfur-doped glass.     

Conventional and Organic Honeys as a Source of Water- and Ethanol-Soluble Molecules with Nutritional and Antioxidant Characteristics

The benefits of natural honeybee products (e.g., honey, royal jelly, beeswax, propolis, beevenom and pollen) to the immune system are remarkable, and many of them are involved in the induction of antibody production, maturation of immune cells and stimulation of the immune system. The type of plants in the geographical area, climatic conditions and production method have a significantly influence on the nutritional quality of honey. However, this variability can influence consumer liking by the sensory attributes of the product. The aim of this work was to compare the most popular honeys from Poland in terms of nutritional value, organoleptic properties and antioxidant activity. In the study, five varieties of honey (honeydew, forest, buckwheat, linden and dandelion) from conventional and organic production methods were tested. The nutritional characteristics of honey samples included acidity, content of water, sugars, vitamin C, HMF and phenolics (total and flavonoids), while honey color, taste, aroma and consistency were investigated in the organoleptic characteristics. The antioxidant activity was determined in water- and ethanol-soluble honey extracts using DPPH and ORAC tests. The results showed that organoleptic and nutritional characteristics of popular Polish honeys differ significantly in relation to plant source and production method. The significant effect of honey variety on the content of HMF, saccharose and phenolics, as well as acidity and antioxidant capacity were noted. The impact of variety and variety × production method interaction was significant in the case of the content of vitamin C, glucose and fructose. A visible difference of buckwheat and forest honeys from other samples was observed. The highest content of total phenolics with antioxidant activity based on the SET mechanism was found in buckwheat honeys, while forest honeys were richer in flavonoids.     

Design and synthesis of two epoxide derivatives from 3-ethynylaniline

For several years ago, several epoxide derivatives have been prepared using different methods; however, some protocols use reagents which could be expensive and require specials conditions. The aim of this investigation was to prepare two new epoxide-derivatives from 3-ethynylaniline using some reactions such as oximation, acetylation, 2 + 2 addition, functionalized chloroamides, and epoxidation via Darzens reaction. The chemical characteristics of epoxide derivatives were determinate through a spectroscopic and spectrometric analysis. In conclusion, it is noteworthy that the reactions used in this study do not involve expensive reagents or special conditions for the synthesis of epoxide derivatives.     

Trichothecenes in Food and Feed,Relevance to Human and Animal Health and Methods of Detection: A Systematic Review

Trichothecene mycotoxins are sesquiterpenoid compounds primarily produced by fungi in taxonomical genera such as Fusarium, Myrothecium, Stachybotrys, Trichothecium, and others, under specific climatic conditions on a worldwide basis. Fusarium mold is a major plant pathogen and produces a number of trichothecene mycotoxins including deoxynivalenol (or vomitoxin), nivalenol, diacetoxyscirpenol, and T-2 toxin, HT-2 toxin. Monogastrics are sensitive to vomitoxin, while poultry and ruminants appear to be less sensitive to some trichothecenes through microbial metabolism of trichothecenes in the gastrointestinal tract. Trichothecene mycotoxins occur worldwide however both total concentrations and the particular mix of toxins present vary with environmental conditions. Proper agricultural practices such as avoiding late harvests, removing overwintered stubble from fields, and avoiding a corn/wheat rotation that favors Fusarium growth in residue can reduce trichothecene contamination of grains. Due to the vague nature of toxic effects attributed to low concentrations of trichothecenes, a solid link between low level exposure and a specific trichothecene is difficult to establish. Multiple factors, such as nutrition, management, and environmental conditions impact animal health and need to be evaluated with the knowledge of the mycotoxin and concentrations known to cause adverse health effects. Future research evaluating the impact of low-level exposure on livestock may clarify the potential impact on immunity. Trichothecenes are rapidly excreted from animals, and residues in edible tissues, milk, or eggs are likely negligible. In chronic exposures to trichothecenes, once the contaminated feed is removed and exposure stopped, animals generally have an excellent prognosis for recovery. This review shows the occurrence of trichothecenes in food and feed in 2011–2020 and their toxic effects and provides a summary of the discussions on the potential public health concerns specifically related to trichothecenes residues in foods associated with the exposure of farm animals to mycotoxin-contaminated feeds and impact to human health. Moreover, the article discusses the methods of their detection.     

Effect of the platinum surface on the potential of nitrate-selective electrodes without internal solution

The effects of oxidation or reduction of the platinum contact used in nitrate-selective electrodes without internal reference solutions were studied by using voltammetric curves. A correlation was found between the state of the platinum surface and the standard potential of the ion-selective electrode under potentiometric conditions.     

Indirect carbon–carbon spin–spin couplings across one,two and three bonds in pyridine and diazine systems: experiment and theory

An excellent linear correlation is found between a large body of experimental spin–spin carbon–carbon couplings, J(CC), across one, two and three bonds in pyridine and diazine ring systems and the corresponding B3PW91/6‐311++G(d,p)//B3PW91/6‐311++G(d,p) computations. The correlation does not differ significantly from the simplest relationship possible, J(CC)_exp. = J(CC)_calcd., within a small and random spread of about 1 Hz. There are 276 experimental values considered, and 124 out of these are new and come from the present work. The aromatic carbon–carbon couplings vary from ?7.6 through +78.5 Hz. It is shown that the correlation provides a reliable tool for predictions of the signs of aromatic J(CC)'s even if the magnitudes of the latter are of the order of 1 Hz. It is demonstrated, for the first time, that the relatively weak ² J(CC) couplings, in the heteroaromatic systems studied, can bear either sign and span a considerable range of about 11 Hz. The character of the correlation indicates that rovibronic effects on aromatic J(CC)'s and those of nuclear motions on aromatic J(CC)'s are practically negligible. All of this is in a perfect agreement with our recent extensive studies on aromatic J(CC)'s in analogous benzene ring system. Substituent effects on the aromatic J(CC)'s turn out to be significant not only for ¹J(CC)'s but also for most of ³J(CC)'s and ² J(CC)'s, and the computation neatly reciprocates these trends. Copyright © 2008 John Wiley & Sons, Ltd.     

Gain–loss asymmetry for emerging stock markets

Stock indexes for some European emerging markets are analyzed using an investment-horizon approach. Austrian ATX index and Dow Jones have been studied and compared with several emerging European markets. The optimal investment horizons are plotted as a function of an absolute return value. Gain–loss asymmetry, originally found for American DJIA index, is observed for all analyzed data. It is shown, that this asymmetry has different character for emerging and for established markets. For established markets, gain curve lies typically above loss curve, whereas in the case of emerging markets the situation is just the opposite. We propose a measure quantifying the gain–loss asymmetry that clearly exhibits a difference between emerging and established markets.     

Kinetic studies on fluvastatin photodegradation in solutions

Summary The effect of solvent on the photodegradation kinetics of fluvastatin was evaluated. The degradation rate of fluvastatin was estimated on the basis of the quantum yields and kinetic parameters determination. The photodegradation appeared to follow first-order kinetics. In order to establish the light intensity absorbed by a system, Reinecke’s salt was used as a chemical actinometer.