<Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> application as a prospective approach for biosynthesis of pyruvic acid from glycerol

With the problems related to chemical methods of pyruvic acid (PA) synthesis, a fast-growing interest has been observed in research aiming at reducing the production cost of PA by applying biotechnological methods. This study aimed to investigate the potential applicability of Yarrowia lipolytica Wratislavia 1.31 yeast strain for valorisation of pure and crude glycerol through the production of industrially desired PA. Conditions required for the effective PA biosynthesis, i.e., pH value, thiamine concentration, agitation, and substrate concentration, were examined in batch and fed-batch cultivation modes. The efficient production of PA occurred under the limitation of thiamine (1 µg L^?1) and was stimulated by moderate pH (4.5) and agitation (800 rev min^?1) of the culture. Under optimal conditions, Y. lipolytica Wratislavia 1.31 was able to produce 85.2 g L^?1 of PA with volumetric productivity of 0.90 g L^?1 h^?1. The yield of PA biosynthesis reached a high level of 1.03 g g^?1. Obtained results confirmed the aptitude of Y. lipolytica yeast to produce high amounts of PA from simple glycerol-containing media. Presented process was very promising and might be considered as an attractive alternative for currently used chemical methods of PA synthesis.     

Zur Kenntnis der Reaktionsfähigkeit des Thiomorpholins und alkylsubstituierter Thiomorpholine, 4. Mitt.

Thiomorpholine as well as alkyl substituted thiomorpholines and their Sdioxides, respectively, are transformed into the corresponding N-Aminothiomorpholines by nitrosation (1–5) followed by the reduction with zinc in acetic acid/acetic acid anhydride under simultaneous formation of the corresponding N-acetyl derivates, and hydrolysis by hydrochloric acid (6–9). Examples of this method are described. 4-Aminothiomorpholines and their Sdioxides react with aldehydes or ketones to give azomethines (10–31). Acylation with mono-and dicarbonic acid chlorides leads to the N-acyl derivatives32–44.Mannich condensation is also possible. By oxidation with yellow mercury oxide tetracenes are formed (46–47).

Teil der DissertationM. Schmitz, Techn. Hochschule Aachen, 1975.     

How we came to produce C60-fullerite

At the beginning two remarks. One to the nomenclature: Fullerite does not name a specific substance; it names a solid entirely consisting of fullerenes, i.e. closed-cage all-carbon molecules. When our method of synthesis is applied, a solid is obtained in which C₆₀ is the most abundant species. This material may thus be called C₆₀-fullerite. The other remark regarding the production of fullerite: in view of the ease with which this could be achieved, I have the feeling that fullerene molecules must belong to a very frequently overlooked molecular species in carbon chemistry. Since the synthesis is simple and does not require many words to be described, I thought it might be interesting to tell how we came to make fullerite.     

Untersuchungen über das dielektrische Verhalten von Polypropylen

Zusammenfassung Das Verhalten von Polypropylen im elektrischen Wechselfeld wurde im Frequenzbereich von 0,15 kHz bis 300 kHz und im Temperaturbereich von –75 C bis +140 C untersucht. Es konnte sowohl ein Tieftemperaturdispersionsgebiet —-Absorption — als auch ein Hochtemperaturdispersionsgebiet —-Absorption — beobachtet werden. Die Untersuchungsergebnisse wurden, um die Breite des Dispersionsgebietes und die zugehörigen -Stufen zu bestimmen, nach demCole-Cole-Kreisbogengesetz analysiert. Aus dem Anstieg der Geraden: logf _max 1/T _K wurden sowohl für die- als auch fur die-Absorption die experimentellen Aktivierungsenergien berechnet. Eine Deutung der Ergebnisse wurde versucht.     

Potentiometric response and mechanism of anionic recognition of heterocalixarene-based ion selective electrodes

The ion selective electrode (ISE)-based potentiometric approach is shown to be an effective means of characterizing the anion recognition sites in the molecular receptor calix[2]pyridino[2]pyrrole (CPP). In particular, potentiometric pH-measurements involving the use of experimental PVC-membranes based on CPP revealed the existence of both mono- and diprotonated forms of the receptor under readily accessible conditions. Based on these analyses, apparent surface protonation constants for this heterocalixarene were found to lie between 8.5-8.9 (pK_B1) and 3.3-3.8 (pK_B2). CPP was found to interact with targeted anionic analytes based on both coulombic and hydrogen bond interactions, as inferred from varying the kinds of ionic sites present within the membrane phase. Potentiometric selectivity studies revealed that CPP preferred “Y-shaped” anions (e.g. acetate, lactate, benzoate) over spherical anions (e.g. fluoride and chloride), fluoride over chloride within the set of spherical anions, and the ortho-isomer over the corresponding meta- and para-isomers in the case of hydroxybenzoate (salicylate and congeners). In the context of this study, the advantages of potentiometric determinations of acetylsalicylic acid using optimized PVC-membranes based on CPP relative to more conventional PVC-membrane ISEs based on traditional anion exchanger were also demonstrated.     

Analysis of phenolic acids in fruits by HPLC with monolithic columns

Reversed-phase HPLC was optimised for simultaneous determination of several derivatives of benzoic and hydroxycinnamic acids (so-called phenolic acids) in plums using a commercially available monolithic column. Mobile phase pH and concentration of organic modifier (methanol and acetonitrile) were tested in order to obtain the best resolution. Satisfactory separation was achieved in gradient mode with a mobile phase consisting of 50 mM phosphate buffer at pH 2.2 (solvent A) and acetonitrile (solvent B). The limits of detection for a UV detector ranged between 0.098 and 2.04 microg/mL for vanillic acid and p-hydroxyphenylacetic acid, respectively. The developed method was used for monitoring the content of polyphenolic acids in plums during their ripening process. The presence of these constituents was confirmed by checking their MS spectra.     

Electron-density studies on hydrogen bonding in chromone derivatives. Part II: comparative study

The experimental electron density of a chromone derivative was determined from a multipole refinement of 100 K X-ray synchrotron data and complemented by theoretical calculations with experimental and optimized geometry. Atomic and topological properties were obtained using the Quantum Theory of Atoms in Molecules approach. The examination of topological parameters unambiguously showed π-delocalization within the H-bonded ring. The application of source function analysis confirmed the intramolecular N–H···O hydrogen bond to be a resonance-assisted hydrogen bond. The topological study confirmed the covalent nature of N–H···O interaction and the electrostatic nature of weak C–H···O interactions.     

Effect of Low Temperature Air Plasma Treatment on Wetting and Flow Properties of Kaolinite Powders

It was found in this study that the air plasma treatment of particular kaolinite has led to the change of its wettability, which was reflected in the decreased values of water contact angles of wetting from 88.7° for virgin kaolinite to 86.3° for 30?min air plasma treated one. Plasma treated samples show higher average surface energies in the wide range of coverage regimes in comparison to the virgin samples as determined by inverse gas chromatography. Results of these measurements confirmed our assumption, that air plasma treatment activates surface energy of the crystal planes of the kaolinite as reflected in the broadened dispersive surface energy distribution after 10?min treatment time. However with prolonged 30?min treatment time the dispersive surface energy distribution profile was decreased. We assume, that the latter decrease reflects the distorsion of the crystal lattice of the kaolinite as confirmed by FTIR analysis as reflected in changes of Si?CO?CSi and Al₂O?CH characteristic absorption bands. Calculated dispersive surface free energy for 24?% surface coverage was increased from original 35?mJ/m² to 40.3 and 40.8?mJ/m² for 10 and 30?min treatment times. There were determined yield locus and flow function dependencies at different stress levels for virgin and different time plasma treated samples (flow index??ff _c , effective angle of internal friction???? _e , unconfined yield strength???? _c ). It was found that by plasma treatment the character of the flow was shifting from region of very cohesive (ff _c ?=?2.39) to the cohesive (ff _c ?=?3.19). For untreated samples effective angle of internal friction was decreased with increasing applied consolidation stress, while for plasma treated kaolinite it was increased.     

Composition of saturated vapor over Ytterbium bromides

The vaporization process of ytterbium di- and tribromide was studied using high-temperature mass spectrometry over the temperature range of 850 to 1300 K. It was ascertained that, at the early vaporization stages, the vapor contained molecules YbBr₃, YbBr₂, YbBr, Br₂, Yb₂Br₂, Yb₂Br₃, Yb₂Br₄, Yb₂Br₅, Yb₂Br₆, and atoms Yb and Br. The partial pressures of all components of saturated vapor were calculated. It was found that vapor composition reflected the course of the reactions of decomposition of tribromide and disproportionation of dibromide in the condensed phase. It was concluded that vaporization of di- and tribromide was incongruent at the initial stages; vaporization of both agents acquired a congruent character with the Yb: Br = 1.0: 1.9_±0.2 ratio with time.