Estimating the pore size distribution of activated carbons from adsorption data of different adsorbates by various methods

Experimental adsorption isotherms of four adsorbates (N2, Ar, C6H6, and CCl4) as well as adsorption enthalpy (C6H6 and CCl4) measured on two strictly microporous carbons are used to evaluate the porosity of adsorbents (i.e., pore size distributions (PSDs) and average pore diameter ( Lav )). The influence of the diameter of adsorbates ( dA) as well as of the temperature ( T ) is analyzed in order to explain the differences or similarities between the above-mentioned quantities for all systems. Proposed previously, the general relationships between the parameters of the Dubinin-Astakhov (DA) isotherm equation (the characteristic energy of adsorption ( E0 ) and the exponent of this equation ( n )) and the average slit-width of carbon micropores are investigated. Moreover, the thermodynamic verification of the Horvath-Kawazoe (HK) theory and the ND model is presented based on data of the adsorption and enthalpy of adsorption of benzene and carbon tetrachloride on two carbons. Finally, the pore diameters calculated from calorimetry data using the Everett and Powl method and those calculated applying the recently developed equations are compared. In our opinion the change of apparent PSD should be monitored by performing a series of isotherm measurements from high (equal and higher than room temperature) to low temperatures (ca. 77.5 K) as was presented in the current study. Moreover, the analysis of the experimental data leads to the conclusion that the entropy of C6H6 and CCl4 can approach to the values characteristic of quasi-solid (a partially ordered structure). Therefore, this behavior of the adsorbate should be taken into consideration in the theoretical assumptions of model and its thermodynamic verification.     

Hematite nanoparticle monolayers on mica preparation by controlled self-assembly

In this research, a simple, green and effective strategy was developed to produce long-term stable oil in water emulsion from soy protein and soy polysaccharide. Soy protein and soy polysaccharide formed dispersible complexes at pH around 3.25 aqueous solution through electrostatic and hydrophobic interactions. A high pressure homogenization produced the protein/polysaccharide complex emulsion having a droplet size about 250 nm. A heat treatment of the emulsion resulted in the protein denaturation, forming irreversible oil-water interfacial films composed of soy protein/soy polysaccharide complexes. The droplets of the emulsion were characterized by dynamic light scattering, ζ-potential, transmission electron microscopy, polysaccharide digestion via pectinase, and confocal laser scanning microscopy observation via dual fluorescence probes. As a result of the polysaccharide being fixed on the droplet surface, the emulsions exhibited long-term stability in the media containing pH values of 2-8 and 0.2 mol/L NaCl. The stable soy protein/soy polysaccharide complex emulsion is a suitable food-grade delivery system in which lipophilic bioactive compounds can be encapsulated.     

A comparison of two-component and four-component approaches for calculations of spin-spin coupling constants and NMR shielding constants of transition metal cyanides

Relativistic density functional theory (DFT) calculations of nuclear spin-spin coupling constants and shielding constants have been performed for selected transition metal (11th and 12th group of periodic table) and thallium cyanides. The calculations have been carried out using zeroth-order regular approximation (ZORA) Hamiltonian and four-component Dirac-Kohn-Sham (DKS) theory with different nonrelativistic exchange-correlation functionals. Two recent approaches for representing the magnetic balance (MB) between the large and small components of four-component spinors, namely, mDKS-RMB and sMB, have been employed for shielding tensor calculations and their results have been compared. Relativistic effects have also been analysed in terms of scalar and spin-orbit contributions at the two-component level of theory, including discussion of heavy-atom-on-light-atom effects for (1)J(CN), σ(C), and σ(N). The results for molecules containing metals from 4th row of periodic table show that relativistic effects for them are small (especially for spin-spin coupling constants). The biggest effects are observed for the 6th row where nonrelativistic theory reproduces only about 50%-70% of the two-component ZORA results for (1)J(MeC) and about 75% for heavy metal shielding constants. It is important to employ a full Dirac picture for calculations of heavy metal shielding constants, since ZORA reproduces only 75%-90% of the DKS results. Smaller discrepancies between ZORA-DFT and DKS are observed for nuclear spin-spin coupling constants. No significant differences are observed between the results obtained using mDKS-RMB and sMB approaches for magnetic balance in four-component calculations of the shielding constants.     

Ultrathin functional films of titanium(IV) oxide

Chemistry and physics of thin semiconducting layers of various types are subjects of intense research. Especially when nanotechnology methods such as self-assembly are involved, amazing structural and/or functional properties may appear. Also modern physical methods using variously organized plasma arrangements are able to produce uniform structures with distinctive functionality. In this review, based virtually on our own work, discussions on the preparation, structure, morphology, and function of titanium(IV) oxide nanoscopic thin films are presented. It was shown that structurally and functionally similar titanium(IV) oxide films can be prepared via completely different preparation techniques. Function tests were arranged as “primary”, covering the assessment of the light induced charge separation efficiency, and “secondary”, based on photocatalytic surface oxidations.     

X-ray analysis at 150?K, synthesis and theoretical calculations of 1-naphthaleneacrylic acid

The X-ray structure, synthesis, theoretical calculation and IR spectra of 1-naphthaleneacrylic acid are reported. The titled compound crystallizes in the monoclinic C 2/c space group with unit cell parameters: a = 14.556(3), b = 5.1332(10), c = 26.832(5) ?, β = 97.02(3)°, V = 1989.8(7) ?³, Z = 8 and form typical centrosymmetric hydrogen-bonded dimers. Theoretical calculations of 1-naphthylacrylic acid isolated molecule and hydrogen-bonded dimer have been carried out using density functional theory at the B3LYP level. For optimized structures the vibrational spectra have been then calculated and compared with experimental IR spectrum. The assignment and characterization of theoretical vibrational spectra were based on the potential energy distribution analysis. This comparison has shown that the theoretical spectrum for the dimer structure is in good agreement with the experimental one. Structural comparisons with naphthalene, and with some substituted 2-propenoic acids have shown influence of the substituent on conformation of the naphthalene ring or 2-propenoic moiety.     

Impact of Single Basepair Mismatches on Electron‐Transfer Processes at Fc‐PNA⋅DNA Modified Gold Surfaces

Gold‐surface grafted peptide nucleic acid (PNA) strands, which carry a redox‐active ferrocene tag, present unique tools to electrochemically investigate their mechanical bending elasticity based on the kinetics of electron‐transfer (ET) processes. A comparative study of the mechanical bending properties and the thermodynamic stability of a series of 12‐mer Fc‐PNA?DNA duplexes was carried out. A single basepair mismatch was integrated at all possible strand positions to provide nanoscopic insights into the physicochemical changes provoked by the presence of a single basepair mismatch with regard to its position within the strand. The ET processes at single mismatch Fc‐PNA?DNA modified surfaces were found to proceed with increasing diffusion limitation and decreasing standard ET rate constants k⁰ when the single basepair mismatch was dislocated along the strand towards its free‐dangling Fc‐modified end. The observed ET characteristics are considered to be due to a punctual increase in the strand elasticity at the mismatch position. The kinetic mismatch discrimination with respect to the fully‐complementary duplex presents a basis for an electrochemical DNA sensing strategy based on the Fc‐PNA?DNA bending dynamics for loosely packed monolayers. In a general sense, the strand elasticity presents a further physicochemical property which is affected by a single basepair mismatch which may possibly be used as a basis for future DNA sensing concepts for the specific detection of single basepair mismatches.     

Catalytic Oxidative Cyclocondensation of o‐Aminophenols to 2‐Amino‐3H‐phenoxazin‐3‐ones

The catalytic oxidative cyclocondensation of the o‐aminophenols 1a–f was investigated. The oxidants used were air/laccase, H₂O₂/horseradish peroxidase, H₂O₂/ebselen (3), and TBHP/diphenyl diselenide 4. The products obtained were 2‐amino‐3H‐phenoxazin‐3‐one—questiomycin A, its derivative 2b, and cinnabarinic acid and actinocin (2c,d). Substrates with methyl groups at 4 and 5 positions of benzene ring were converted to different dihydrophenoxazinones 2g,h. Compounds having chlorine atoms at the same positions underwent oxidation to planar phenoxa-zinones 2e,f with elimination of one hydrochloride molecule.     

Synthesis and properties of a newly obtained sorbent based on silica gel coated with a polyaniline film as the stationary phase for non-suppressed ion chromatography

The new sorbent for non-suppressed ion chromatography based on silica gel coated with a film of polyaniline (PANI) was obtained in a process of in situ polymerization of aniline by oxidation with ammonium peroxydisulfate. Raman analyses performed using a Thermo Scientific DXR confocal Raman Microscope equipped with the Omnic 8 software from Thermo Fisher Scientific have proved a uniform distribution of PANI on the surface of chromatographic beads and in the pores of the particle.     

Usefulness of chaotropic salt additive in RP‐HPLC of organic nonionized compounds

New synthesized 1,4‐disubstituted thiosemicarbazide derivatives were analyzed in the RP system, modified with the addition of salts; chaotropic (sodium hexafluorophosphate – Na PF₆), cosmotropic (sodium phosphate – NaH₂PO₄), and neutral (NaCl) on Zorbax XDB C18 column. The effect of the eluent composition on the analytes retention (k), system efficiency (N), peak symmetry (A_s), and LOD values were all examined and compared to unmodified organic‐aqueous mobile phase system. It was established that eluent modified with chaotropic salts addition was also the most advantageous according to other peak parameters such as the theoretical plates numbers and asymmetry factors. The lower LOD values were achieved in comparison to unmodified organic‐aqueous eluent system. Compatibility of lipophilicity parameters calculated by the use of computer software with experimental ones measured by RP‐HPLC was also the best for chaotropic modified mobile phase. To explain the observed phenomena, molecular modeling was performed for chosen representative compound in different environment representing examined mobile phase composition.     

Investigation of ion-pair precipitates of selected alkoxylates and complex salts of specific metal cations by liquid secondary ion mass spectrometry

Liquid secondary ion (LSI) mass spectra of ion-pair precipitates obtained for Triton X-100 with strontium, lead, cadmium and mercury tetraphenylborates and for selected butoxylene-ethoxylene monoalkyl ethers with barium tetraiodobismuthate(III) are discussed. On the basis of LSI mass spectra, recorded in both positive and negative modes, the formulae of the ion-pair precipitates were determined. On the basis of B/E mass spectra, the fragmentation routes of [M - H + Ba](+) ions for butoxylene-ethoxylene monoalkyl ether complexes of barium and [M - H + Cd](+) ions for the Triton X-100 complex of cadmium are proposed.