Isolation of Indonesian cananga oil using multi-cycle pressure drop process

New process, instantaneous controlled pressure drop (DIC) was applied on Cananga odorata dry flowers with the aim to isolate essential oil. DIC is based on high temperature, short time heating followed by an abrupt pressure drop into a vacuum. A part of volatile compounds is carried away from flowers in the form of vapor (DIC direct oil) that evolves adiabatically during the pressure drop (proper isolation process) and the other part remains in the DIC-treated flowers (DIC residual oil). In the present paper, the effect of DIC cycle number (1-9) and heating time (4.3-15.7 min) on the availability of oil compounds was investigated at three levels of steam pressure (0.28, 0.4 and 0.6 MPa). The availability was defined as the amount of a compound in direct or residual oil divided by the amount of this compound in the reference oil extracted from non-treated flowers by chloroform during 2h. The total availability and yield of volatiles in the direct oil increased with pressure and cycle number. At a higher pressure, the effect of heating time was insignificant. The amount of oxygenated monoterpenes and other light oxygenated compounds (i.e. predominantly exogenous compounds) in the residual flowers was lower than in the direct oil and this amount decreased with cycle number. On the other hand, the availability of oxygenated sesquiterpenes and other heavy oxygenated compounds (i.e. predominantly endogenous compounds) in residual flowers exhibited a maximum for about five cycles and their quantity at this point was three times as much as in the direct oil. The total availability of each compound at 0.6 MPa was higher than one. The rapid DIC process (0.6 MPa, 8 cycles, 6 min) gave better results than steam distillation (16 h) concerning direct oil yield (2.8%dm versus 2.5%dm) and content of oxygenated compounds (72.5% versus 61.7%).     

Thermal and spectroscopic analysis of florfenicol irradiated in the solid-state

The study has been undertaken to check the effect of ionising radiation on the physical and chemical properties of florfenicol, an antibiotic of a wide range of antibacterial activity. The solid-state samples were subjected to an electron beam generated by accelerator corresponding to the doses of 25, 100 and 400 kGy, and the effect of the exposure was analysed by the methods not requiring changes in the state (with no preliminary treatment), such as SEM, DSC, FTIR, XRD, EPR and HPLC. Florfenicol irradiated with a dose of 25 kGy has not changed the form or colour, however, a small increase in intensity of some absorption bands in the FTIR spectrum and of some peaks in the XRD pattern, a decrease in the melting point by 0.6°C, the appearance of free radicals and a loss in the FF content within the error of the method (0.91%) have been observed. After irradiation with greater doses (100 and 400 kGy) the changes have intensified, yellow discolouration appeared and the loss of FF content has increased to 6.39%. As follows from the results, the compound studied in solid-state undergoes radiolysis after e-beam irradiation in the doses ≥25 kGy, but lower doses (15–20 kGy) can be applied for its decontamination or sterilization with no adverse effect on its physico-chemical properties.     

Structural diversity in native cyclodextrins/folic acid complexes--from [2]-rotaxane to exclusion compound

The formation of different complexes of folic acid depending on the size of the host cyclodextrin resulting in either an exclusion compound (with the smallest α-cyclodextrin) or 2-rotaxane, where cyclodextrin is threaded over folic acid (with β- and γ-cyclodextrins), is presented. The formation is carried out in water which allows both possible application in pharmaceutical sciences and usage of environmentally friendly "green chemistry". The obtained compounds are thoroughly characterized using one and two dimensional NMR, mass spectrometry, differential scanning calorimetry and thermogravimetric analysis.     

Highly sensitive detection of S-nitrosylated proteins by capillary gel electrophoresis with laser induced fluorescence

S-nitrosylated proteins are biomarkers of oxidative damage in aging and Alzheimer's disease (AD). Here, we report a new method for detecting and quantifying nitrosylated proteins by capillary gel electrophoresis with laser induced fluorescence detection (CGE-LIF). Dylight 488 maleimide was used to specifically label thiol group (SH) after switching the S-nitrosothiol (S-NO) to SH in cysteine using the "fluorescence switch" assay. In vitro nitrosylation model-BSA subjected to S-nitrosoglutathione (GSNO) optimized the labeling reactions and characterized the response of the LIF detector. The method proves to be highly sensitive, detecting 1.3 picomolar (pM) concentration of nitrosothiols in nanograms of proteins, which is the lowest limit of detection of nitrosothiols reported to date. We further demonstrated the direct application of this method in monitoring protein nitrosylation damage in MQ mediated human colon adenocarcinoma cells. The nitrosothiol amounts in MQ treated and untreated cells are 14.8±0.2 and 10.4±0.5 pmol/mg of proteins, respectively. We also depicted nitrosylated protein electrophoretic profiles of brain cerebrum of 5-month-old AD transgenic (Tg) mice model. In Tg mice brain, 15.5±0.4 pmol of nitrosothiols/mg of proteins was quantified while wild type contained 11.7±0.3 pmol/mg proteins. The methodology is validated to quantify low levels of S-nitrosylated protein in complex protein mixtures from both physiological and pathological conditions.     

<Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> application as a prospective approach for biosynthesis of pyruvic acid from glycerol

With the problems related to chemical methods of pyruvic acid (PA) synthesis, a fast-growing interest has been observed in research aiming at reducing the production cost of PA by applying biotechnological methods. This study aimed to investigate the potential applicability of Yarrowia lipolytica Wratislavia 1.31 yeast strain for valorisation of pure and crude glycerol through the production of industrially desired PA. Conditions required for the effective PA biosynthesis, i.e., pH value, thiamine concentration, agitation, and substrate concentration, were examined in batch and fed-batch cultivation modes. The efficient production of PA occurred under the limitation of thiamine (1 µg L^?1) and was stimulated by moderate pH (4.5) and agitation (800 rev min^?1) of the culture. Under optimal conditions, Y. lipolytica Wratislavia 1.31 was able to produce 85.2 g L^?1 of PA with volumetric productivity of 0.90 g L^?1 h^?1. The yield of PA biosynthesis reached a high level of 1.03 g g^?1. Obtained results confirmed the aptitude of Y. lipolytica yeast to produce high amounts of PA from simple glycerol-containing media. Presented process was very promising and might be considered as an attractive alternative for currently used chemical methods of PA synthesis.     

Analysis of phenolic acids in fruits by HPLC with monolithic columns

Reversed-phase HPLC was optimised for simultaneous determination of several derivatives of benzoic and hydroxycinnamic acids (so-called phenolic acids) in plums using a commercially available monolithic column. Mobile phase pH and concentration of organic modifier (methanol and acetonitrile) were tested in order to obtain the best resolution. Satisfactory separation was achieved in gradient mode with a mobile phase consisting of 50 mM phosphate buffer at pH 2.2 (solvent A) and acetonitrile (solvent B). The limits of detection for a UV detector ranged between 0.098 and 2.04 microg/mL for vanillic acid and p-hydroxyphenylacetic acid, respectively. The developed method was used for monitoring the content of polyphenolic acids in plums during their ripening process. The presence of these constituents was confirmed by checking their MS spectra.     

Electron-density studies on hydrogen bonding in chromone derivatives. Part II: comparative study

The experimental electron density of a chromone derivative was determined from a multipole refinement of 100 K X-ray synchrotron data and complemented by theoretical calculations with experimental and optimized geometry. Atomic and topological properties were obtained using the Quantum Theory of Atoms in Molecules approach. The examination of topological parameters unambiguously showed π-delocalization within the H-bonded ring. The application of source function analysis confirmed the intramolecular N–H···O hydrogen bond to be a resonance-assisted hydrogen bond. The topological study confirmed the covalent nature of N–H···O interaction and the electrostatic nature of weak C–H···O interactions.     

Green synthesis and antibacterial effects of aqueous colloidal solutions of silver nanoparticles using clove eugenol

Silver nanoparticles were synthesized using clove extract (CE). Scanning transmission electron microscopy (STEM) revealed the morphology of the metallic Ag nanoparticles obtained via the clove extract synthesis (Ag NPs‐CE), which had a uniform distribution and average sizes varying from 10 nm to 100 nm. Fourier transform infra‐red (FTIR) spectroscopy showed that clove eugenol acts as a capping and reducing agent being adsorbed on the surface of Ag NPs‐CE, enabling their reduction from Ag⁺ and preventing their agglomeration. Formation of the Ag⁰ structure is also confirmed in the FTIR spectrum by the presence in the Ag NPs‐CE sample of the –C=O and –C=C vibrations at wavenumbers 1600 and 2915 cm^‐1, respectively. Antibacterial and antifungal tests using three strains of bacteria and one fungi strain showed that the Ag NPs‐CE performed better compared to pure clove extract (CE) sample.     

Application of TLC and OPLC in the Determination of Pigments from Natural Products

JPC – Journal of Planar Chromatography – Modern TLC - Planar chromatographic methods thin-layer chromatography (TLC) and over-pressure thin-layer chromatography (OPLC) have been...