Thermal properties of fats extracted from powdered baby formulas

The aim of this research was to analyse composition, fatty acids distribution and oxidative stability of fats extracted from four samples of baby formulas. The fats were oxidized in a differential scanning calorimeter (DSC) under polythermal (dynamic) conditions and at normal pressure. The DSC experiments were carried out in an oxygen flow atmosphere using different, linearly programmed, heating rates in the range of 4?C12.5?°C/min. The extrapolated onset temperatures were determined using DSC exotherms and used for the assessment of the thermal oxidative stabilities of the samples. Activation energies (E _a), pre-exponential factors (Z) and reaction rate constants (k) for oil oxidation under DSC conditions were calculated using the Ozawa?CFlynn?CWall method and the Arrhenius equation. The melting characteristics of the studied fats were obtained. The fats extracted from the agglomerated samples with higher onset temperatures were more stable than the fats extracted from the initial samples of baby formulas.     

Modelling relation between oxidation resistance and tribological properties of non-toxic lubricants with the use of artificial neural networks

The lubricants based on vegetable oils, as environmental friendly, are urgently sought. However, in addition to ecological characteristics, the lubricating properties have to be met. To meet these requirements the active additives influencing the lubricating properties and oxidation resistance are used. The useful lifetime of lubricants is determined largely by their abilities to resist oxidation. The article presented the results of new, ecological lubricants development. The oxidation performances of different developed lubricants have been tested. The experimentally determined oxidation stability of the compositions based on vegetable oils are presented. Analysed oxidation onset temperature was obtained from the differential scanning calorimetry (DSC) curves, which provides the rapid prediction of the oxidative stability of lubricants. Besides the lubricating composition based on vegetable oils, the developed greases-based mineral, or synthetic oil were investigated. The properties of these greases were evaluated using the measurement of parameters describing structure (penetration) and resistance to high temperature (dropping point). The lubricating properties of both the greases and vegetable oil compositions were tested on four-ball testing machine. In the results of the modelling of the lubricating properties the neural network models for the both types of the lubricants were developed. A discussion of the research results and analysis of models validity is given below. The experimental results are compared with the calculated using the neural models. An acceptable agreement was achieved.     

Reprint of: Application of micro-thin-layer chromatography as a simple fractionation tool for fast screening of raw extracts derived from complex biological,pharmaceutical and environmental samples

The main goal of present paper is to demonstrate the separation and detection capability of micro-TLC technique involving simple one step liquid extraction protocols of complex materials without multi-steps sample pre-purification. In the present studies target components (cyanobacteria pigments, lipids and fullerenes) were isolated from heavy loading complex matrices including spirulina dried cells, birds’ feathers and fatty oils as well as soot samples derived from biomass fuel and fossils-fired home heating systems. In each case isocratic separation protocol involving less that 1 mL of one component or binary mixture mobile phases can be completed within time of 5–8 min. Sensitive detection of components of interest was performed via fluorescence or staining techniques using iodine or phosphomolybdic acid. Described methodology can be applied for fast fractionation or screening of whole range of target substances as well as chemo-taxonomic studies and fingerprinting of complex mixtures, which are present in raw biological or environmental samples.     

Solubility of Solid 2,3-Dimethylbutane and Cyclopentane in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 2,3-dimethylbutane and cyclopentene in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in solutes. The experimental value of the mole fraction solubility of solid 2,3-dimethyl-butane in liquid argon at 87.3 K is (8.26 ± 1.60) × 10^–6 and (2.77 ± 0.94) × 10^–8 in liquid nitrogen at 77.4 K. The experimental value of the mole fraction solubility of solid cyclopentene in liquid argon at 87.3 K is (5.11 ± 0.44) × 10^–6 and (4.60 ± 0.76) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbons in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for investigated solid hydrocarbons than is liquid nitrogen.     

Kinetics of exothermal decomposition of some ketone-2,4-dinitrophenylhydrazones

In this study, the thermal stability and exothermal decomposition of some ketone-2,4-dinitrophenylhydrazones have investigated using the DSC technique. The synthesized and purified crystalline solids are thermally stable and start to decompose after melting. Non-isothermal DSC curves, recorded at several heating rates, were used to evaluate the melting properties and the kinetics of thermal decomposition. The isoconversional and model-fitting methods were applied to determine the activation parameters from the common analysis of multiple curves measured at different heating rates. Based on the results of the model??free method, a kinetic model was derived, and the kinetic parameters were obtained by means of a multivariate nonlinear regression. The results are discussed in relation to the effect of the ketone structure.     

Novel tetradentate diamine dioxime ligands: synthesis,characterization and in vivo behavior of their 99mTc‐complexes

Two novel diamine dioxime ligands, 4,7‐diaza‐3,8‐diethyldecane‐2,9‐dione bis oxime (3) and 4,9‐diaza‐3,10‐diethyldodecane‐2,11‐dione bis oxime (5), were synthesized in order to develop new brain perfusion imaging agents, based on ^99mTc(V)‐complexes. The synthesis involved condensation of 2‐hydroxyimino‐3‐pentanone with appropriate diamine in protic solvent which afforded the bis imine adducts. Subsequent reduction of imine functional groups yielded a diastereoisomeric mixture of 3 and 5. UV–visible, IR, ¹H NMR, ¹³C NMR and elemental analysis were used to characterize the structures of the synthesized compounds. ^99mTc‐complexes of both diamine dioximes were prepared and radiolabeling conditions optimized to give the maximum yield. Physicochemical parameters of the labeled complexes as well as and their biodistribution in rats were investigated. Both compounds (3 and 5) formed ^99mTc‐complexes with a net charge of zero, determined by electrophoresis. The resultant lipophilic ^99mTc‐complexes of 3 and 5 were readily formed at pH ~9.0 within 10 min at room temperature with yields of 90% and 95%, respectively. The ^99mTc‐3 complex was found to be stable within 1 h, while ^99mTc‐5 was stable for a few hours. A significant brain uptake of ^99mTc‐3 (2.1% injected dose) and ^99mTc‐5 (1.8% injected dose) complexes, 2 min after injection, is in accordance with their lipophilicity. The present study suggests that both ligands are promising candidates as new ^99mTc‐based brain‐imaging agents. Copyright © 2012 John Wiley & Sons, Ltd.     

Donor‐π‐Acceptors Containing the 10‐(1,3‐Dithiol‐2‐ylidene)anthracene Unit for Dye‐Sensitized Solar Cells

Two donor–acceptor molecular tweezers incorporating the 10‐(1,3‐dithiol‐2‐ylidene)anthracene unit as donor group and two cyanoacrylic units as accepting/anchoring groups are reported as metal‐free sensitizers for dye‐sensitized solar cells. By changing the phenyl spacer with 3,4‐ethylenedioxythiophene (EDOT) units, the absorption spectrum of the sensitizer is red‐shifted with a corresponding increase in the molar absorptivity. Density functional calculations confirmed the intramolecular charge‐transfer nature of the lowest‐energy absorption bands. The new dyes are highly distorted from planarity and are bound to the TiO₂ surface through the two anchoring groups in a unidentate binding form. A power‐conversion efficiency of 3.7 % was obtained with a volatile CH₃CN‐based electrolyte, under air mass 1.5 global sunlight. Photovoltage decay transients and ATR‐FTIR measurements allowed us to understand the photovoltaic performance, as well as the surface binding, of these new sensitizers.     

First row divalent transition metal complexes of aryl-appended tris((pyridyl)methyl)amine ligands: syntheses, structures, electrochemistry, and hydroxamate binding properties

Divalent manganese, cobalt, nickel, and zinc complexes of 6-Ph(2)TPA (N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-Ph(2)TPA)Mn(CH(3)OH)(3)](ClO(4))(2) (1), [(6-Ph(2)TPA)Co(CH(3)CN)](ClO(4))(2) (2), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (3), [(6-Ph(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (4)) and 6-(Me(2)Ph)(2)TPA (N,N-bis((6-(3,5-dimethyl)phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-(Me(2)Ph)(2)TPA)Ni(CH(3)CN)(2)](ClO(4))(2) (5) and [(6-(Me(2)Ph)(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (6)) have been prepared and characterized. X-ray crystallographic characterization of 1A.CH(3)()OH and 1B.2CH(3)()OH (differing solvates of 1), 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN revealed mononuclear cations with one to three coordinated solvent molecules. In 1A.CH(3)()OH and 1B.2CH(3)()OH, one phenyl-substituted pyridyl arm is not coordinated and forms a secondary hydrogen-bonding interaction with a manganese bound methanol molecule. In 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN, all pyridyl donors of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands are coordinated to the divalent metal center. In the cobalt, nickel, and zinc derivatives, CH/pi interactions are found between a bound acetonitrile molecule and the aryl appendages of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands. (1)H NMR spectra of 4 and 6 in CD(3)NO(2) solution indicate the presence of CH/pi interactions, as an upfield-shifted methyl resonance for a bound acetonitrile molecule is present. Examination of the cyclic voltammetry of 1-3 and 5 revealed no oxidative (M(II)/M(III)) couples. Admixture of equimolar amounts of 6-Ph(2)TPA, M(ClO(4))(2).6H(2)O, and Me(4)NOH.5H(2)O, followed by the addition of an equimolar amount of acetohydroxamic acid, yielded the acetohydroxamate complexes [((6-Ph(2)TPA)Mn)(2)(micro-ONHC(O)CH(3))(2)](ClO(4))(2) (8), [(6-Ph(2)TPA)Co(ONHC(O)CH(3))](ClO(4))(2) (9), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))](ClO(4))(2) (10), and [(6-Ph(2)TPA)Zn(ONHC(O)CH(3))](ClO(4))(2) (11), all of which were characterized by X-ray crystallography. The Mn(II) complex 8.0.75CH(3)()CN.0.75Et(2)()O exhibits a dinuclear structure with bridging hydroxamate ligands, whereas the Co(II), Ni(II), and Zn(II) derivatives all exhibit mononuclear six-coordinate structures with a chelating hydroxamate ligand.