Donor‐π‐Acceptors Containing the 10‐(1,3‐Dithiol‐2‐ylidene)anthracene Unit for Dye‐Sensitized Solar Cells

Two donor–acceptor molecular tweezers incorporating the 10‐(1,3‐dithiol‐2‐ylidene)anthracene unit as donor group and two cyanoacrylic units as accepting/anchoring groups are reported as metal‐free sensitizers for dye‐sensitized solar cells. By changing the phenyl spacer with 3,4‐ethylenedioxythiophene (EDOT) units, the absorption spectrum of the sensitizer is red‐shifted with a corresponding increase in the molar absorptivity. Density functional calculations confirmed the intramolecular charge‐transfer nature of the lowest‐energy absorption bands. The new dyes are highly distorted from planarity and are bound to the TiO₂ surface through the two anchoring groups in a unidentate binding form. A power‐conversion efficiency of 3.7 % was obtained with a volatile CH₃CN‐based electrolyte, under air mass 1.5 global sunlight. Photovoltage decay transients and ATR‐FTIR measurements allowed us to understand the photovoltaic performance, as well as the surface binding, of these new sensitizers.     

Reprint of: Application of micro-thin-layer chromatography as a simple fractionation tool for fast screening of raw extracts derived from complex biological,pharmaceutical and environmental samples

The main goal of present paper is to demonstrate the separation and detection capability of micro-TLC technique involving simple one step liquid extraction protocols of complex materials without multi-steps sample pre-purification. In the present studies target components (cyanobacteria pigments, lipids and fullerenes) were isolated from heavy loading complex matrices including spirulina dried cells, birds’ feathers and fatty oils as well as soot samples derived from biomass fuel and fossils-fired home heating systems. In each case isocratic separation protocol involving less that 1 mL of one component or binary mixture mobile phases can be completed within time of 5–8 min. Sensitive detection of components of interest was performed via fluorescence or staining techniques using iodine or phosphomolybdic acid. Described methodology can be applied for fast fractionation or screening of whole range of target substances as well as chemo-taxonomic studies and fingerprinting of complex mixtures, which are present in raw biological or environmental samples.     

Thermal properties of fats extracted from powdered baby formulas

The aim of this research was to analyse composition, fatty acids distribution and oxidative stability of fats extracted from four samples of baby formulas. The fats were oxidized in a differential scanning calorimeter (DSC) under polythermal (dynamic) conditions and at normal pressure. The DSC experiments were carried out in an oxygen flow atmosphere using different, linearly programmed, heating rates in the range of 4?C12.5?°C/min. The extrapolated onset temperatures were determined using DSC exotherms and used for the assessment of the thermal oxidative stabilities of the samples. Activation energies (E _a), pre-exponential factors (Z) and reaction rate constants (k) for oil oxidation under DSC conditions were calculated using the Ozawa?CFlynn?CWall method and the Arrhenius equation. The melting characteristics of the studied fats were obtained. The fats extracted from the agglomerated samples with higher onset temperatures were more stable than the fats extracted from the initial samples of baby formulas.     

Modelling relation between oxidation resistance and tribological properties of non-toxic lubricants with the use of artificial neural networks

The lubricants based on vegetable oils, as environmental friendly, are urgently sought. However, in addition to ecological characteristics, the lubricating properties have to be met. To meet these requirements the active additives influencing the lubricating properties and oxidation resistance are used. The useful lifetime of lubricants is determined largely by their abilities to resist oxidation. The article presented the results of new, ecological lubricants development. The oxidation performances of different developed lubricants have been tested. The experimentally determined oxidation stability of the compositions based on vegetable oils are presented. Analysed oxidation onset temperature was obtained from the differential scanning calorimetry (DSC) curves, which provides the rapid prediction of the oxidative stability of lubricants. Besides the lubricating composition based on vegetable oils, the developed greases-based mineral, or synthetic oil were investigated. The properties of these greases were evaluated using the measurement of parameters describing structure (penetration) and resistance to high temperature (dropping point). The lubricating properties of both the greases and vegetable oil compositions were tested on four-ball testing machine. In the results of the modelling of the lubricating properties the neural network models for the both types of the lubricants were developed. A discussion of the research results and analysis of models validity is given below. The experimental results are compared with the calculated using the neural models. An acceptable agreement was achieved.     

Retention of anions on silica-based metalloporphyrin stationary phases.

The silica-based Fe(III)-protoporphyrin and Zn-tetraphenylporphyrin stationary phases were examined for the HPLC separation of anions. The retention of nine common inorganic anions as well as benzoate anion (BA) and its hydroxy analogues (HBA) was examined using tartrate, acetate, and succinate eluents. The retention factors of inorganic anions on the FeProP stationary phase were in the order Cl- < NO3- < ClO4- < I- < SCN- and for organic anions benzoate < p-hydroxybenzoate < m-hydoxybenzoate < o-hydroxybenzoate. The retention factors of organic anions examined for a ZnTPP column were in the order p-HBA < m-HBA < BA < o-HBA.     

Polyaniline-coated silica gel

Silica gel microspheres 7 and 15 μm in diameter were coated with an overlayer of polyaniline camphorsulfonate or hydrochloride during the oxidative polymerization of aniline. Coated silica gel and polyaniline precipitate were separated using a difference in sedimentation rate. In an alternative approach, the microspheres were modified with polyaniline in the presence of 35 nm colloidal silica. This technique prevented the macroscopic precipitation of polyaniline. Coatings of neat, 3-aminopropyl- and octadecyl-modified silica gel with polyaniline hydrochloride were compared. The surface composition of coated microspheres was characterized by X-ray photoelectron spectroscopy. Potential applications of particles in electrorheology, organic catalysis, and in modeling of conductivity behavior in composites are demonstrated.     

Investigation of the tensile properties of “epoxy resin‐monomer” systems using cationic UV‐crosslinkable blends

The compatibility of cycloaliphatic and aromatic multifunctional epoxides with several epoxide resins allows the development of a wide range of cationic radiation‐curable formulations. The influence of different “epoxide resin‐monomer” systems UV‐cured in the presence of suitable cationic photoinitiators on the resulting physicochemical film properties was studied, and the results are stated. Copyright © 2004 John Wiley & Sons, Ltd.     

A comparison of two-component and four-component approaches for calculations of spin-spin coupling constants and NMR shielding constants of transition metal cyanides

Relativistic density functional theory (DFT) calculations of nuclear spin-spin coupling constants and shielding constants have been performed for selected transition metal (11th and 12th group of periodic table) and thallium cyanides. The calculations have been carried out using zeroth-order regular approximation (ZORA) Hamiltonian and four-component Dirac-Kohn-Sham (DKS) theory with different nonrelativistic exchange-correlation functionals. Two recent approaches for representing the magnetic balance (MB) between the large and small components of four-component spinors, namely, mDKS-RMB and sMB, have been employed for shielding tensor calculations and their results have been compared. Relativistic effects have also been analysed in terms of scalar and spin-orbit contributions at the two-component level of theory, including discussion of heavy-atom-on-light-atom effects for (1)J(CN), σ(C), and σ(N). The results for molecules containing metals from 4th row of periodic table show that relativistic effects for them are small (especially for spin-spin coupling constants). The biggest effects are observed for the 6th row where nonrelativistic theory reproduces only about 50%-70% of the two-component ZORA results for (1)J(MeC) and about 75% for heavy metal shielding constants. It is important to employ a full Dirac picture for calculations of heavy metal shielding constants, since ZORA reproduces only 75%-90% of the DKS results. Smaller discrepancies between ZORA-DFT and DKS are observed for nuclear spin-spin coupling constants. No significant differences are observed between the results obtained using mDKS-RMB and sMB approaches for magnetic balance in four-component calculations of the shielding constants.     

Kinetics of exothermal decomposition of some ketone-2,4-dinitrophenylhydrazones

In this study, the thermal stability and exothermal decomposition of some ketone-2,4-dinitrophenylhydrazones have investigated using the DSC technique. The synthesized and purified crystalline solids are thermally stable and start to decompose after melting. Non-isothermal DSC curves, recorded at several heating rates, were used to evaluate the melting properties and the kinetics of thermal decomposition. The isoconversional and model-fitting methods were applied to determine the activation parameters from the common analysis of multiple curves measured at different heating rates. Based on the results of the model??free method, a kinetic model was derived, and the kinetic parameters were obtained by means of a multivariate nonlinear regression. The results are discussed in relation to the effect of the ketone structure.     

BMD-TLC — the Useful Technique for Quantitative Analysis of Chelidonine,Chelerithrine and Berberine in Herbal Drugs

JPC – Journal of Planar Chromatography – Modern TLC - Three step bivariant multiple development thin-layer chromatography (BMD-TLC) technique was used in the quantitative analysis of...