An In Vitro Anticancer,Antioxidant, and Phytochemical Study on Water Extract of Kalanchoe daigremontiana Raym.-Hamet and H. Perrier

Kalanchoe species are succulents with anti-inflammatory, antioxidant, and analgesic properties, as well as cytotoxic activity. One of the most popular species cultivated in Europe is Kalanchoe daigremontiana Raym.-Hamet and H. Perrier. In our study, we analyzed the phytochemical composition of K. daigremontiana water extract using UHPLC-QTOF-MS and estimated the cytotoxic activity of the extract on human ovarian cancer SKOV-3 cells by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, flow cytometry, luminometric, and fluorescent microscopy techniques. The expression levels of 92 genes associated with cell death were estimated via real-time PCR. The antioxidant activity was assessed via flow cytometry on human keratinocyte HaCaT cell line. The DPPH (2,2-diphenyl-1-picrylhydrazyl) radical and FRAP (ferric-reducing antioxidant power) assays were also applied. We identified twenty bufadienolide compounds in the water extract and quantified eleven. Bersaldegenin-1,3,5-orthoacetate and bryophyllin A were present in the highest amounts (757.4 ± 18.7 and 573.5 ± 27.2 ng/mg dry weight, respectively). The extract showed significant antiproliferative and cytotoxic activity, induced depolarization of the mitochondrial membrane, and significantly arrested cell cycle in the S and G2/M phases of SKOV-3 cells. Caspases-3, 7, 8, and 9 were not activated during the treatment, which indicated non-apoptotic cell death triggered by the extract. Additionally, the extract increased the level of oxidative stress in the cancer cell line. In keratinocytes treated with menadione, the extract moderately reduced the level of oxidative stress. This antioxidant activity was confirmed by the DPPH and FRAP assays, where the obtained IC₅₀ values were 1750 ± 140 and 1271.82 ± 53.25 μg/mL, respectively. The real-time PCR analysis revealed that the extract may induce cell death via TNF receptor (tumor necrosis factor receptor) superfamily members 6 and 10.     

Thermal and spectroscopic analysis of florfenicol irradiated in the solid-state

The study has been undertaken to check the effect of ionising radiation on the physical and chemical properties of florfenicol, an antibiotic of a wide range of antibacterial activity. The solid-state samples were subjected to an electron beam generated by accelerator corresponding to the doses of 25, 100 and 400 kGy, and the effect of the exposure was analysed by the methods not requiring changes in the state (with no preliminary treatment), such as SEM, DSC, FTIR, XRD, EPR and HPLC. Florfenicol irradiated with a dose of 25 kGy has not changed the form or colour, however, a small increase in intensity of some absorption bands in the FTIR spectrum and of some peaks in the XRD pattern, a decrease in the melting point by 0.6°C, the appearance of free radicals and a loss in the FF content within the error of the method (0.91%) have been observed. After irradiation with greater doses (100 and 400 kGy) the changes have intensified, yellow discolouration appeared and the loss of FF content has increased to 6.39%. As follows from the results, the compound studied in solid-state undergoes radiolysis after e-beam irradiation in the doses ≥25 kGy, but lower doses (15–20 kGy) can be applied for its decontamination or sterilization with no adverse effect on its physico-chemical properties.     

Synthesis and properties of a newly obtained sorbent based on silica gel coated with a polyaniline film as the stationary phase for non-suppressed ion chromatography

The new sorbent for non-suppressed ion chromatography based on silica gel coated with a film of polyaniline (PANI) was obtained in a process of in situ polymerization of aniline by oxidation with ammonium peroxydisulfate. Raman analyses performed using a Thermo Scientific DXR confocal Raman Microscope equipped with the Omnic 8 software from Thermo Fisher Scientific have proved a uniform distribution of PANI on the surface of chromatographic beads and in the pores of the particle.     

The Influence of Polyols on the Process Kinetics and Bioactive Substance Content in Osmotic Dehydrated Organic Strawberries

In recent years, an increasing interest in reducing sugar consumption has been observed and many studies are conducted on the use of polyols in the osmotic dehydration process to obtain candied or dried fruits. The studies in the literature have focused on the kinetics of the process as well as the basic physical properties. In the scientific literature, there is a lack of investigation of the influence of such polyol solutions such as sorbitol and mannitol used as osmotic substances during the osmotic dehydration process on the contents of bioactive components, including natural colourants. Thus, the aim of the study was to evaluate the impact of polyols (mannitol and sorbitol) in different concentrations on the process kinetics and on chosen physical (colour and structural changes) as well as chemical (sugars and polyol content, total anthocyanin content, total polyphenol content, vitamin C, antioxidant activity) properties of osmotic-dehydrated organic strawberries. Generally, the results showed that the best solution for osmotic dehydration is 30% or 40% sorbitol solutions, while mannitol solution is not recommended due to difficulties with preparing a high-concentration solution and its crystallization in the tissue. In the case of sorbitol, the changes of bioactive compounds, as well as colour change, were similar to the sucrose solution. However, the profile of the sugar changed significantly, in which sucrose, glucose, and fructose were reduced in organic strawberries and were partially replaced by polyols.     

Fracturing of Clay During Drying: Modelling and Numerical Simulation

Non-uniform distribution of moisture contents inside of the porous materials during drying results in compressional stresses inside of the material and tensional ones close to the surface. The tensional stresses together with brittleness of dry material are the reasons of fracturing of the material. The proposed model consists of two parts. The mass transfer is described by simple diffusion equation. The mechanical behaviour of the material is modelled with the network model in which the material is modelled as the set of small particles interconnected elastically via springs. The spring constants and strengths depend on Young modulus and the material tensional strength. The dependences of these material parameters on the moisture content are determined. Then two 2D initial-boundary problems are solved. The results show possible way of cracks initiation and generation by drying.     

Silicon solar cells with Al2O3 antireflection coating

The paper presents the possibility of using Al₂O₃ antireflection coatings deposited by atomic layer deposition ALD. The ALD method is based on alternate pulsing of the precursor gases and vapors onto the substrate surface and then chemisorption or surface reaction of the precursors. The reactor is purged with an inert gas between the precursor pulses. The Al₂O₃ thin film in structure of the finished solar cells can play the role of both antireflection and passivation layer which will simplify the process. For this research 50×50 mm monocrystalline silicon solar cells with one bus bar have been used. The metallic contacts were prepared by screen printing method and Al₂O₃ antireflection coating by ALD method. Results and their analysis allow to conclude that the Al₂O₃ antireflection coating deposited by ALD has a significant impact on the optoelectronic properties of the silicon solar cell. For about 80 nm of Al₂O₃ the best results were obtained in the wavelength range of 400 to 800 nm reducing the reflection to less than 1%. The difference in the solar cells efficiency between with and without antireflection coating was 5.28%. The LBIC scan measurements may indicate a positive influence of the thin film Al₂O₃ on the bulk passivation of the silicon.     

Mammalian reovirus core protein micro 2 initiates at the first start codon and is acetylated

Mammalian reovirus is an enteric virus that contains a double-stranded RNA genome. The genome consists of ten RNA segments that encode eight structural and three non-structural proteins. The structural proteins form a double-layered structure. The innermost layer, called the core, consists of five proteins (lambda1, lambda2, lambda3, micro 2, and sigma2). Protein lambda3 is the RNA-dependent RNA polymerase (RdRp) and micro 2 is thought to be an RdRp cofactor. Translation of most reovirus proteins is known to commence at the first start codon. However, the translation initiation site of the viral core protein micro 2, encoded by the M1 RNA segment, has been in dispute. Although the theoretical molecular weight of micro 2 is 83 267 Da the actual molecular weight is unknown because micro 2 runs aberrantly in SDS-PAGE and has resisted characterization by Edman degradation, indicating that the amino terminus is post-translationally modified. In this study, we used proteolysis coupled with MALDI-Qq-TOFMS to determine that translation of micro 2 initiates at the first AUG codon, that its actual molecular weight approximates the theoretical value of 83 kDa, that the amino terminal methionine residue is removed, and that the next amino acid (alanine) is post-translationally acetylated.     

Investigation of ion-pair precipitates of selected alkoxylates and complex salts of specific metal cations by liquid secondary ion mass spectrometry

Liquid secondary ion (LSI) mass spectra of ion-pair precipitates obtained for Triton X-100 with strontium, lead, cadmium and mercury tetraphenylborates and for selected butoxylene-ethoxylene monoalkyl ethers with barium tetraiodobismuthate(III) are discussed. On the basis of LSI mass spectra, recorded in both positive and negative modes, the formulae of the ion-pair precipitates were determined. On the basis of B/E mass spectra, the fragmentation routes of [M - H + Ba](+) ions for butoxylene-ethoxylene monoalkyl ether complexes of barium and [M - H + Cd](+) ions for the Triton X-100 complex of cadmium are proposed.     

Indirect carbon–carbon spin–spin couplings across one,two and three bonds in pyridine and diazine systems: experiment and theory

An excellent linear correlation is found between a large body of experimental spin–spin carbon–carbon couplings, J(CC), across one, two and three bonds in pyridine and diazine ring systems and the corresponding B3PW91/6‐311++G(d,p)//B3PW91/6‐311++G(d,p) computations. The correlation does not differ significantly from the simplest relationship possible, J(CC)_exp. = J(CC)_calcd., within a small and random spread of about 1 Hz. There are 276 experimental values considered, and 124 out of these are new and come from the present work. The aromatic carbon–carbon couplings vary from ?7.6 through +78.5 Hz. It is shown that the correlation provides a reliable tool for predictions of the signs of aromatic J(CC)'s even if the magnitudes of the latter are of the order of 1 Hz. It is demonstrated, for the first time, that the relatively weak ² J(CC) couplings, in the heteroaromatic systems studied, can bear either sign and span a considerable range of about 11 Hz. The character of the correlation indicates that rovibronic effects on aromatic J(CC)'s and those of nuclear motions on aromatic J(CC)'s are practically negligible. All of this is in a perfect agreement with our recent extensive studies on aromatic J(CC)'s in analogous benzene ring system. Substituent effects on the aromatic J(CC)'s turn out to be significant not only for ¹J(CC)'s but also for most of ³J(CC)'s and ² J(CC)'s, and the computation neatly reciprocates these trends. Copyright © 2008 John Wiley & Sons, Ltd.