Spectroscopic investigations on polypropylene‐carbon nanofiber composites. I. Raman and electron spin resonance spectroscopy

Isotactic polypropylene‐vapor grown carbon nanofiber composites containing various fractions of carbon nanofibers, ranging from 0 to 20 wt %, have been prepared. Raman spectroscopy was used to analyze the effect of the dispersion of carbon nanofibers within polypropylene and the interactions between carbon nanofibers and macromolecular chains. The as‐recorded Raman spectra have been successfully fitted by a linear convolution of Lorentzian lines. Changes of the Raman lines parameters (position, intensity, width, and area) of polypropylene and carbon nanofibers were analyzed in detail. The Raman spectra of the polymeric matrix—at low concentrations of nanofibers—show important modifications that indicate strong interactions between carbon nanofibers and the polymeric matrix reflecting by vibrational dephasing of macromolecular chains. The Raman spectrum of carbon nanofibers is sensitive to the loading with carbon nanofibers, showing changes of the resonance frequencies, amplitudes, and width for both D‐ and G‐bands. Raman data reveals the increase of the disorder, as the concentration of carbon nanofibers is increased. The presence of the typical ESR line assigned to conducting electrons delocalized over carbon nanofibers is confirmed and the presence of a spurious magnetic line due to catalyst's residues is reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1644–1652, 2009     

Enantioselective route to 3-vinylidene tetrahydropyrans and 3-vinylidene oxepanes based on a silyl-Prins cyclization

A general method has been developed for the asymmetric synthesis of 3-vinylidene tetrahydropyrans and 3-vinylidene oxepanes based on the Lewis acid-catalyzed intramolecular reactions of oxocarbenium ions with propargylsilanes. The observed excellent diastereoselectivity and a high asymmetric induction offer a new synthetic method with a wide scope and generality.     

New thermoplastic poly(carbonate-urethane)s based on chain extenders with sulfur atoms

New thermoplastic segmented polyurethanes were obtained by a one-step melt polyaddition using 40, 50 and 60 mol% poly(hexane-1,6-diyl carbonate) diol of \(\bar{M}_{n} = 860\) g mol^?1, 1,1′-methanediylbis(4-isocyanatobenzene) and 2,2′-[sulfanediylbis(benzene-1,4-diyloxy)]diethanol, 2,2′-[oxybis(benzene-1,4-diylsulfanediyl)]diethanol or 2,2′-[sulfanediylbis(benzene-1,4-diylsulfanediyl)]diethanol as a chain extender. FTIR, atomic force microscopy, differential scanning calorimetry and thermogravimetry were used to examine the polyurethanes’ structure and thermal properties. Moreover, their Shore A/D hardness, tensile, adhesive and optical attributes were determined. They were transparent high-molar-mass materials showing good tensile strength (up to 51.9 MPa). The polyurethanes exhibited improved adhesion to copper taking into consideration that of conventional ones, and middle or high refractive index values (1.57–1.60), and both these parameters increased with an increase of the content of sulfur atoms in the polyurethane chain. The newly obtained polyurethanes can be considered as materials for numerous medical and optical appliances.     

Studies on the uptake of different arsenic forms and the influence of sample pretreatment on arsenic speciation in White mustard (Sinapis alba)

The concentration and speciation of arsenic incorporated by plants grown in the presence of different arsenic compounds was compared, and the influence of plant sample pretreatment and extraction procedures on the recovery and reliability of speciation analyses was studied. It was concluded that sample pretreatment greatly affected the extraction efficiency, but did not change arsenic speciation. The most suitable extraction procedure involved dried plant material without the use of liquid nitrogen. To assess the ability of White mustard to uptake arsenic in different forms, samples were cultivated in nutrient solutions containing either As(III), As(V), monomethylarsonic acid (MMA) or dimethylarsinic acid (DMA). The translocation factor was the highest (0.70) when DMA was added to the nutrient solution, however the overall As concentration in plant tissues was the lowest in this case. Only inorganic As was found in plant tissues when either As(III) or As(V) was added to the nutrient solution. When organic arsenic was present in the nutrient medium, however, it was partially transformed by the plants into inorganic forms.     

Circular dichroism, optical rotation and absolute configuration of 2-cyclohexenone-cis-diol type phenol metabolites: redefining the role of substituents and 2-cyclohexenone conformation in electronic circular dichroism spectra

The absolute configurations of 2-cyclohexenone cis-diol metabolites resulting from the biotransformation of the corresponding phenols have been determined by comparison of their experimental and calculated circular dichroism spectra (TDDFT at the PCM/B2LYP/Aug-cc-pVTZ level), optical rotations (calculated at the PCM/B3LYP/Aug-cc-pVTZ level) and by stereochemical correlation. It is found that circular dichroism spectra and optical rotations of 2-cyclohexenone derivatives are strongly dependent on the ring conformation (M or P sofa S(5) or half-chair), enone non-planarity and the nature and positions of the hydroxy and alkyl substituents. The effect of non-planarity of the enone chromophore, including the distortion of the C=C bond, is determined for the model structures by TDDFT calculations at the PCM/B2LYP/6-311++G(2d,2p) level. Non-planarity of the C=C bond in the enone chromophore is commonly encountered in 2-cyclohexenone derivatives and it is a source of significant rotatory strength contribution to the electronic circular dichroism spectra. It is shown that the two lowest-energy transitions in acrolein and 2-cyclohexenone and its derivatives are n(C=O)-π(C=O)* and π(C=C)-π(C=O)*, as expected, while the shorter-wavelength (below 200 nm) transitions are of more complex nature. In 2-cyclohexenone and its alkyl derivatives it is predominantly a mixture of π(C=C)-π(C=C)* and π(C=C)-σ* transitions, whereas the presence of hydroxy substituent results in a dominant contribution due to the n(OH)-π(C=O)* transition. A generalized model for correlation of the CD spectra of 2-cyclohexenones with their structures is presented.     

Synthesis and structural characterization of novel 2-benzimidazolylthioureas: adducts of natural isothiocyanates and 2-amino-1-methylbenzimidazole

Adducts of natural allyl, phenethyl, and benzyl isothiocyanates and 2-amino-1-methylbenzimidazole were synthesized. After optimization of the reaction conditions, the target 2-benzimidazolylthioureas were obtained in reasonable yields. The detailed molecular and crystal structures of these compounds were characterized by spectroscopic and X-ray methods. Spectral analysis demonstrated that N-(1-methylbenzimidazolyl)-N′-allylthiourea, N-(1-methylbenzimidazolyl)-N′-benzylthiourea, and N-(1-methylbenzimidazolyl)-N′-phenethylthiourea exist in solution in an unprecedented three tautomeric forms, whose structures were corroborated unambiguously.     

Solid state NMR spectroscopy as a precise tool for assigning the tautomeric form and proton position in the intramolecular bridges of o-hydroxy Schiff bases

Two analogous Schiff bases, (S,E)-2-((1-hydroxy-3-methyl-1,1-diphenylbutan-2-ylimino)methyl)phenol (1) and (S,Z)-2-hydroxy-6-((1-hydroxy-3-methyl-1,1-diphenylbutan-2-ylamino)methylene)cyclohexa-2,4-dienone (2), exist in the solid state as phenol-imine and keto-amine tautomers, respectively. Their crystal structures were solved using the X-ray diffraction method. Sample 1 forms orthorhombic crystals of space group P2(1)2(1)2(1), while 2 forms monoclinic crystals of space group P2(1). In each sample, one molecule is in the asymmetric unit of the crystal structure. One-dimensional and two-dimensional solid state NMR techniques were used for structure assignment and for inspection of the (13)C and (15)N δ(ii) of the chemical shift tensor (CST) values. NMR study indicates that the span (Ω = δ(11)-δ(33)) and the skew (κ = 3(δ(22)-δ(iso)/Ω) are extremely sensitive to change in the tautomeric form of the Schiff bases. Theoretical calculations of NMR shielding parameters for 1 and 2 and a model compound with reduced aliphatic residue were performed using the GIAO method with B3LYP functional and 6-311++g(d,p) basis sets. From comparative analysis of the experimental and theoretical parameters, it was concluded that the position of hydrogen in the intramolecular bridge has tremendous influence on (13)C and (15)N CST parameters. Inspection of Ω and κ parameters allowed for the establishment of the nature of the hydrogen bonding and the assignment of the equilibrium proton position in the intramolecular bridges in the solid state.     

Characterization of 1,3-alternate calix[4]arene-silica bonded stationary phases and their comparison to selected commercial columns by using principal component analysis

Twelve calix[4]arene stationary phases in 1,3-alternate conformation, synthesized in the authors’ laboratory, were characterized in terms of their surface coverage, hydrophobic selectivity, aromatic selectivity, shape selectivity, hydrogen bonding capacity and ion-exchange capacity. The set of tests commonly used for evaluation of commercially available stationary phases was applied to assess fundamental chromatographic properties of the calixarene phases. The new calixarene phases were compared to each other, to Caltrex and LiChrosorb C-18 columns. Principal component analysis has been used to provide comparison between 1,3-alternate calix[4]arene phases and commercially available phenyl, fluorophenyl and fluoroalkyl columns.     

Factorization and Dilation Problems for Completely Positive Maps on von Neumann Algebras

We study factorization and dilation properties of Markov maps between von Neumann algebras equipped with normal faithful states, i.e., completely positive unital maps which preserve the given states and also intertwine their automorphism groups. The starting point for our investigation has been the question of existence of non-factorizable Markov maps, as formulated by C. Anantharaman-Delaroche. We provide simple examples of non-factorizable Markov maps on M_n(\mathbbC){M_n(\mathbb{C})} for all n ≥ 3, as well as an example of a one-parameter semigroup (T(t)) _t≥0 of Markov maps on M₄(\mathbbC){M_4(\mathbb{C})} such that T(t) fails to be factorizable for all small values of t > 0. As applications, we solve in the negative an open problem in quantum information theory concerning an asymptotic version of the quantum Birkhoff conjecture, as well as we sharpen the existing lower bound estimate for the best constant in the noncommutative little Grothendieck inequality.     

Annealing study of two-dimensional patterned Ge nanostructures via nanosphere lithography

Experimental studies on patterning hexagonal Ge nanostructures have been conducted on Si substrates through deposition of Ge with colloidal particles as a mask. The deposited Ge thin film possesses, according to the X-ray diffraction measurements, in plane texture, being epitaxial and aligned with the (111) Si substrate. The size distribution of the patterned Ge nanostructures is narrow, as indicated by the atomic force microscopy and scanning electron microscopy measurements. We have obtained Ge nanostructures with lateral dimension of 490 nm (height 12 nm), 200 nm (height 6 nm) and 82 nm (height 6 nm) by using different sizes of polystyrene spheres. We have performed in depth studies of the Ge nanostructures’ behavior due to thermal and rapid thermal post-annealing processes. FT micro-Raman spectroscopy shows that there is no Si intermixing during the annealing process. In order to quantify the changes in the height and lateral dimension, we have performed atomic force microscopy and white light interferometry analysis. The changes in shape and the decrease in the area of a cross-section of Ge nanostructure will be discussed in respect to similar results shown in the literature for Ge thin films during the annealing process.