Bulk reaction modeling of ducts with and without mean flow

A general formulation for analysis of sound field in a uniform flow duct lined with bulk-reacting sound-absorbing material is presented here. Presented theoretical model predicts the rate of attenuation for symmetric as well as asymmetric modes in rectangular duct lined with loosely bound (bulk-reacting) sound-absorbing material, which allows acoustic propagation through the lining. The nature of attenuation in rectangular ducts lined on two and four sides with and without mean flow is discussed. Computed results are compared with published theoretical and experimental results. The presented model can be used as guidelines for the acoustic design of silencers, air-conditioning ducts, industrial fans, and other similar applications.     

Synthesis,structural and electrical properties of Ti modified Bi2Sn2O7 pyrochlore

Polycrystalline ceramic samples of Bi₂Sn_2−xTi_xO₇ (x=0.00, 0.2, 0.4, 0.6 and 0.8) have been synthesized by standard high temperature solid state reaction method. The effect of homovalent cation (titanium) substitution on the Sn-site on the structural and electrical properties of the pure Bi₂Sn₂O₇ ceramic have been studied by X-ray diffraction followed by SEM, dielectric and dc conductivity studies. The structural analysis indicates that the increase of titanium contents do not lead to any secondary phase. The frequency and temperature dependent dielectric studies have been carried out. It is found that the Ti doping reduces the material particle size. The size of the particles are strongly influenced by the addition of titanium to the system. The substitution of Ti for Sn ions affected the degree of disorder and modified the dielectric properties leading to more resistive ceramic compounds. The activation energies of all the compounds were calculated using the relation σ=σ₀exp(−Ea/kT).     

Crowd synchrony and quorum sensing in delay-coupled lasers

Crowd synchrony and quorum sensing arise when a large number of dynamical elements communicate with each other via a common information pool. Previous evidence has shown that this type of coupling leads to synchronization, when coupling is instantaneous and the number of coupled elements is large enough. Here we consider a situation in which the transmission of information between the system components and the coupling pool is not instantaneous. To that end, we model a system of semiconductor lasers optically coupled to a central laser with a delay. Our results show that, even though the lasers are nonidentical due to their distinct optical frequencies, zero-lag synchronization arises. By changing a system parameter, we can switch between two different types of synchronization transition. The dependence of the transition with respect to the delay-coupling parameters is studied.     

Femtosecond two-photon LIF imaging of atomic species using a frequency-quadrupled Ti:sapphire laser

Femtosecond (fs)-duration laser pulses are well suited for two-photon laser-induced-fluorescence (TPLIF) imaging of key atomic species such as H, N, and O in gas-phase reacting flows. Ultrashort pulses enable efficient nonlinear excitation, while reducing interfering photochemical processes. Furthermore, amplified fs lasers enable high-repetition-rate imaging (typically 1–10 kHz) for capturing the dynamics of turbulent flow fields. However, two-dimensional (2D), single-laser-shot fs-TPLIF imaging of the above species is challenging in most practical flow fields because of the limited ultraviolet pulse energy available in commercial optical parametric amplifier (OPA)-based tunable laser sources. In this work, we report the development of an efficient, fs frequency-quadrupling unit [i.e., fourth-harmonic generator (FHG)] with overall conversion efficiency more than six times greater than that of commercial OPA-based systems. The development, characterization, and application of the fs-FHG system for 2D imaging of H atoms in flames are described in detail. The potential application of the same laser system for 2D imaging of N and O atoms is also discussed.     

Photovoltaic structures using AgSb(S x Se1−x )2 thin films as absorber

Photovoltaic structures were prepared using AgSb(S _x Se_1?x )₂ as absorber and CdS as window layer at various conditions via a hybrid technique of chemical bath deposition and thermal evaporation followed by heat treatments. Silver antimony sulfo selenide thin films [AgSb(S _x Se_1?x )₂] were prepared by heating multilayers of sequentially deposited Sb₂S₃/Ag dipped in Na₂SeSO₃ solution, glass/Sb₂S₃/Ag/Se. For this, Sb₂S₃ thin films were deposited from a chemical bath containing SbCl₃ and Na₂S₂O₃. Then, Ag thin films were thermally evaporated on glass/Sb₂S₃, followed by selenization by dipping in an acidic solution of Na₂SeSO₃. The duration of dipping was varied as 3, 4 and 5 h. Two different heat treatments, one at 350 °C for 20 min in vacuum followed by a post-heat treatment at 325 °C for 2 h in Ar, and the other at 350 °C for 1 h in Ar, were applied to the multilayers of different configurations. X-ray diffraction results showed the formation of AgSb(S _x Se_1?x )₂ thin films as the primary phase and AgSb(S,Se)₂ and Sb₂S₃ as secondary phases. Morphology and elemental detection were done by scanning electron microscopy and energy dispersive X-ray analysis. X-ray photoelectron spectroscopic studies showed the depthwise composition of the films. Optical properties were determined by UV–vis–IR transmittance and reflection spectral analysis. AgSb(S _x Se_1?x )₂ formed at different conditions was incorporated in PV structures glass/FTO/CdS/AgSb(S _x Se_1?x )₂/C/Ag. Chemically deposited post-annealed CdS thin films of various thicknesses were used as window layer. J–V characteristics of the cells were measured under dark and AM1.5 illumination. Analysis of the J–V characteristics resulted in the best solar cell parameters of V _oc = 520 mV, J _sc = 9.70 mA cm^?2, FF = 0.50 and η = 2.7 %.     

Application of phased array techniques to coarse grain components inspection

Ultrasonic inspection of cast stainless steel components from primary and auxiliary cooling circuits of French Nuclear Power Plant has to face with major difficulties due to the coarse grained structure of these materials. Attenuation losses and structural noise are encountered, which limits the performances of defect detection ability, mostly in terms of degraded signal-to-noise ratio and poor sensitivity. To overcome such problems, theoretical and experimental studies have been achieved at the French Atomic Energy Commission, with support from the French Institute for Radiological Protection and Nuclear Safety. Experimental studies have been performed over stainless steel specimen of known coarse structure (equiaxial grains and/or elongated grains), containing artificial reflectors (cylindrical holes and electro-eroded surface breaking notches). Those mock-ups have been inspected using contact probes of different array designs (linear or matrix splitting), and using pulse echo or dual-element techniques. Such arrays allow to control the ultrasonic beam so as to investigate different inspection angles and focusing depths. Experiments were carried out using oblique longitudinal waves, using delay laws computed by a specific model, taking account of acoustical and geometrical properties of the probes and the inspected component. In addition, specific reconstruction techniques have been investigated to enhance the signal-to-noise ratio as well as spatial resolution. These techniques are based on beam-forming summation and multi-angle inspections. Experimental results show that such techniques allow to reduce the speckle noise and to optimise the beam resolution. Those increased performances allow to detect and to size small planar defects located at the inner wall of a thick specimen, using corner and tip diffraction echoes.     

Nucleation efficiency of R134a as a sensitive liquid for superheated drop emulsion detector

Superheated emulsion detector is known to detect neutrons, γ-rays and other charged particles. The present work includes the study of nucleation efficiency of superheated drops of one of the CFC-free liquids, R134a (C₂H₂F₄), to fast neutrons, its response to γ-rays from ²⁴¹Am and ¹³⁷Cs and compare its nucleation efficiency with that of R12. The observation indicates that because of the presence of hydrogen, the nucleation efficiency is less in R134a than in R12 in the present neutron energy range of consideration. R134a is one of the most environment-friendly, commercially available liquid that is suitable for superheated drop detector, specially in neutron dosimetry and one needs to investigate it in detail.