Adsorption of poly(ethylene glycol)s on mercury/aqueous solution interface 1. Kinetics of PEG 8000 adsorption

In order to study the influence of the adsorption of fulvic compounds on voltammetric signals and to understand better the adsorption of these compounds on hydrophobic natural water interfaces, adsorption studies of macromolecules such as poly(ethylene glycol) (HO(CH₂CH₂O)_n) with molecular weight of 8000 were done on the mercury/water interface by a.c. voltammetry at the potential of zero charge. The maximum surface concentration, adsorption equilibrium constant and adsorption rate constant have been determined from the global adsorption mechanism, controlled by two determining steps: diffusion and kinetics of adsorption at the interface.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Potentiometric studies on the complexation of copper(II) by phenolic acids as discrete ligand models of humic substances

Studies on the complexation of copper(II) by phenolic acids, as ligand models of humic substances were done by potentiometry. The acids under study were: 3,4-dihydroxyhydrocinnamic acid or hydrocaffeic acid (1), 3,4-dihydroxyphenylacetic acid (2) and 3,4-dihydroxybenzoic acid or protocatechuic acid (3). Acidity constants of the ligands and the formation constants of metal-ligand complexes were evaluated by computer programs. The carboxylic group of the phenolic acids has different pK_a1 values, being the dissociation constants intrinsically related with the distance between the function and the aromatic nucleus. The results obtained allow concluding that acidity constants of the catechol moiety of the compounds are similar with pK_a2 and pK_a3 values between 9.47-9.41 and 11.55-11.70. The complexation properties of the three ligands towards copper(II) ion are quite similar, being the species found not different either in nature or stability. Although the model ligands have some structural differences no significant differences were found in their complexation properties towards copper(II). So, it can be postulated that complexation process is intrinsically related with the presence of a catechol group.     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.     

Determination of ageing time of spirits in oak barrels using a headspace–mass spectrometry (HS-MS) electronic nose system and multivariate calibration

The aromatic composition of sugar cane spirits and, in general, of alcoholic beverages, is mainly influenced by the ageing process in wood barrels. There are several factors that affect the quality of the final aged product, but the time of the storage in the barrel is perhaps the most important one. Ageing time must therefore be controlled in order to detect counterfeits; however, this parameter is very difficult to control and, at present, there is no analytical method available to determine it. We propose a quantitative method for determining the ageing time of sugar cane spirits in oak barrels by using an electronic nose based on coupling directly a headspace sampler to a mass spectrometer (HS-MS), and multivariate calibration. The method developed is simple and provides, in 5 min, the ageing time of spirits with an accuracy of about 1 month.     

Chemical, structural, and thermal properties of Zn(II)-Cr(III) layered double hydroxides intercalated with sulfated and sulfonated surfactants

Zn(II)-Cr(III)-LDHs (layered double hydroxides) containing sulfated or sulfonated surfactants as the interlamellar anion were synthesized by the coprecipitation method. The syntheses were conducted under various different experimental conditions, such as the Zn : Cr ratio, pH, and aging time. In each of the prepared materials, unlike previously reported data, the interlayer anion arrangement did not change, being consistent with a perpendicular monolayer. The thermal decomposition process of the prepared materials was studied by a set of analysis methods, such as TG/DTA, TG/MS, PXRD, and FT-IR. From the results obtained it was possible to conclude that, in an air atmosphere, the anions decomposed by a partial combustion, leading to the formation of sulfide. The results also showed that sulfonated surfactants containing LDHs are much more stable than those containing sulfated surfactants. A mechanism was proposed for the thermal decomposition of such LDHs based on the experimental results.     

Electrochromic properties of WO<Subscript>3</Subscript> and WO<Subscript>3</Subscript>:P thin films

WO₃ and WO₃:P (5 mol% H₃PO₄) thin films were prepared using the sol-gel route and the electrochromic properties of the films were investigated using in situ spectroelectrochemical methods. The measurements were performed in propylene carbonate solution with 0.1 M LiClO₄ as electrolyte. During the cathodic polarization at –0.8 V a blue coloration is observed with a reversible variation between 14% and 84% of the transmittance at λ=633 nm. The kinetics for the bleaching process is faster for the WO₃:P film than for the undoped WO₃ film. Electronic Publication     

Determination of lead on the airborne particulates of urban Valencia city

Summary A method for the determination of lead in airborne particulates by graphite furnace atomic absorption spectrometry after extraction with HCl-HNO₃ (120–150°C) is described. Particulate lead levels in the atmosphere have been measured in samples collected throughout a year, sampling has been made at eleven sites within the city of Valencia. The results obtained in this study show that annual means of lead levels are within the range of 0.526 to 7.033 g/m³ depending upon the sampling site. Lead levels are higher in winter and autumn. Lead and nitrogen oxide levels are well correlated.     

Nickel determination in osteoblast-like cell culture medium by adsorptive cathodic stripping voltammetry with a mercury microelectrode

The purpose of this study is to investigate the influence of nickel, which is an alloying element in commonly used metallic biomaterials, on the biomaterials mineralization process. An electrochemical method was developed to quantify this metal ion in osteoblast-like cell culture medium (OST) by performing adsorptive cathodic stripping voltammetry (CSV) with dimethylglyoxime (DMG) at a mercury film microelectrode (MFM). The optimized analytical conditions and the square-wave CSV parameters for the analysis are: DMG concentration: 5.00 × 10⁻⁴ mol L⁻¹; ammonium chloride buffer: 0.10 mol L⁻¹ (pH 9.2); frequency: 50 Hz, amplitude 20 mV; step: 2 mV; adsorption time: 10 s, deposition potential: −0.70 V and reduction potential: −1.20 V. The limit of detection was 7.70 × 10⁻⁹ mol L⁻¹ for an adsorption time of 10 s. The results achieved by CSV using the MFM were compared to those obtained by atomic absorption spectrometry (AAS) to ensure the reliability of the electrochemical method. The mineralization process was evaluated by biochemical and histochemical assays.     

Density of states due to donor-pair molecules in three- and two-dimensional semiconductor systems

The density of states is calculated for a random distribution of donor-pairs of hydrogenlike impurities in three- and two-dimensional systems. Recent investigations of the hydrogen molecule in the alternant–molecular–orbital approximation are here extended. We found that the lowest excited state ¹Σu (i.e., H⁺H^?), which is optically connected to the ground state, plays a relevant role in the absorption spectra of semiconductor systems.