A simple and fast micromethod for the analysis of polychlorinated biphenyls in air by sorbent enrichment and ultrasound-assisted solvent extraction

A combination of sorbent enrichment and ultrasound-assisted solvent extraction has been used to determine polychlorinated biphenyls in air. Analytes were sampled by pumping a known volume of air through a porous polymer (Tenax TA). The enriched adsorbent was transferred into a glass vial, and ultrasound-assisted extraction of the analytes was then performed in n-hexane. Quantification was carried out by using gas chromatography coupled to tandem mass spectrometry. Breakthrough volume of the sampling step was studied, indicating that 10 m³ of air could be processed without losses of the most volatile compounds. Good recoveries (75–96%) were obtained, and limits of detection at the sub ng m^–3 were achieved for all the analytes. The proposed method is very simple and fast, avoiding the use of large solvent volumes and time-consuming preconcentration steps.     

Antiedematogenic activity of two thiazolidine derivatives: N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene) rhodanine (GS26) and N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene)-2,4-thiazolidinedione (GS28)

The search for new anti-inflammatory drugs has been constant in several research centers. The use of the Bioisostery concept allows the elaboration of new bioactive compounds with different properties through the introduction of substitute groups in one or more positions of a main molecule with known biological activity. Preliminary works accomplished at our laboratory with 2,4-thiazolidinedione isosters demonstrated inhibitory activity on edema formation for N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene)-2,4-thiazolidinedione (GS28) and N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene) rhodanine (GS26). We verified the antiedematogenic and ulcerogenic activity of these two compounds in Wistar rats. The carrageenan induced paw edema suffered significant (p<0.05) inhibition (28.36% on average) for GS28 (100 mg/kg; v.o.) during the entire time of the experiment. GS26 (50 and 100 mg/kg; v.o.) significantly inhibited (p<0.05) the paw edema dextran induced (22.1 and 27.8%, for the respective doses) after 180 min. The compounds GS26 and GS28 did not show ulcerogenic activity on gastric mucous. The results suggest antiedematogenic action for both compounds without the appearance of gastric lesions.     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

Sorption and desorption of molybdenum in alumina microspheres

The behavior of minor amount of molybdenum(VI) in the presence of large quantity of aluminum nitrate and separation of Mo(VI) from Al(III) with the aid of a chromatographic process onto an alumina column has been studied. The separation of both elements is in favor of the selective uptake of molybdenum by the alumina. The solution containing both elements is an acidified aluminum nitrate of high concentration in aluminum. The work envisage a future separation and purification of radiomolybdenum for the milking of tecnetium-99m.     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

Determination of ochratoxin A in maize bread samples by LC with fluorescence detection

Ochratoxin A (OTA) is a secondary fungal metabolite produced by several moulds, mainly by Aspergillus ochraceus, A. carbonarius, A. niger and by Penicillium verrucosum. The present work shows the results of comparative studies using different procedures for the analysis of OTA in maize bread samples. The studied analytical methods involved extraction with different volumes of PBS/methanol, different extraction apparatus, and clean-up through immunoaffinity columns. The separation and identification were carried out by high-performance liquid chromatography with fluorescence detection. The optimized method for analysis of OTA in maize bread involved extraction with PBS:methanol (50:50), and clean-up with IAC column. The limit of quantification was 0.033 ng g⁻¹. Recoveries ranged from 87% to 102% for fortifications at 2.000 and 0.500 ng g⁻¹, respectively, within-day R.S.D. of 1.4% and 4.7%. The proposed method was applied to 15 samples and the presence of OTA was found in nine samples at concentrations ranging from nd to 2.650 ng g⁻¹.