Microcolumn ion chromatography with conductimetric detection

Summary A miniaturized flow cell for an electrical conductivity detector has been made and applied to the ion chromatography of inorganic anions. It consisted of stainless steel tubes (0.13 mm ID×0.31 mm OD) and PTFE tubes (0.25 mm ID×2 mm OD). The detection limit for chloride at S/N=3 was 36 pg or 0.33 ppm for a 0.11 l injection.     

Preparation of a colloidal array of NaTaO3 nanoparticles via a confined space synthesis route and its photocatalytic application

The confined space synthesis method has been applied to the preparation of sodium tantalate (NaTaO(3)); hydrothermal reaction of NaOH and Ta(2)O(5) was carried out in the pores of a three-dimensional mesoporous carbon, which was replicated by the colloidal array of silica nanospheres (SNSs) 20 nm in size. This approach led to the formation of a colloidal array of NaTaO(3) nanoparticles 20 nm in size with a surface area of 34 m(2) g(-1). The photocatalytic performance of the colloidal array of NaTaO(3) nanoparticles for overall water splitting under UV irradiation (λ > 200 nm) was evaluated after loading a NiO cocatalyst onto NaTaO(3) samples. The NiO-loaded NaTaO(3) nanoparticles showed photocatalytic activity for overall water splitting more than three times as high as non-structured bulk NaTaO(3) particles.     

Ultrasensitive CE for heavy metal ions using the variations in the chemical structures formed from new octadentate fluorescent probes and cationic polymers

Novel fluorescent probes have been developed for the ultratrace detection of heavy metal ions by capillary electrophoresis using laser-induced fluorescence detection. Based on a molecular design, the probes are composed of an octadentate chelating moiety, a macrocyclic DOTA (tetraazacyclododecanetetraacetic acid) and an acyclic DTPA (diethylenetriaminepentaacetic acid) frame, a spacer and a fluorophore (fluorescein). These were chosen on the basis of their ability to form kinetically inert and highly emissive complexes, and to prevent a quenching effect even with heavy and paramagnetic metal ions. Addition of a cationic polymer, polybrene, in the separation buffer provided high resolution and simultaneous detection of Ca(2+), Mg(2+), Cu(2+), Zn(2+), Ni(2+), Co(2+), Mn(2+), Cd(2+) and Pb(2+). The direct fluorescence detection of these metal ions with high sensitivity at lower ppt levels, typically 2-7 × 10(-11) M (potentially sub-ppt), was successfully achieved. While separation of anionic compounds using a counter cation ("Ion Association (IA)" mode) is typically controlled by the ion association equilibrium constants, K(ass), it was found that differences in the mobilities, μ(ep(IAC)), of the ion association complexes formed between the probe complexes and counter cations are the driving forces for separation in this new method. This suggests that each of the polybrene-probe complexes has different chemical structures among metal ions, which were able to be determined by CD spectra in this investigation. This novel separation mode was termed the "Ion Association Complex (IAC)" mode, distinct from the IA mode.     

Photocatalytic reduction of nitrobenzenes to aminobenzenes in aqueous suspensions of titanium(IV) oxide in the presence of hole scavengers under deaerated and aerated conditions

Photocatalytic reduction of nitrobenzenes to corresponding aminobenzenes in aqueous suspensions of titanium(IV) oxide (TiO(2)) containing hole scavengers under various conditions was examined. In photocatalytic reduction of m-nitrobenzenesulfonic acid (m-NBS) in the presence of formic acid (FA) under deaerated conditions, m-aminobenzenesulfonic acid (m-ABS) was produced almost quantitatively in acidic suspensions and high efficiency (>99%) in FA utilization as a hole scavenger was achieved. No re-oxidation of m-ABS occurred in acidic conditions both in the presence and absence of FA. The high yield of m-ABS was explained by strong ability of FA as a hole scavenger and possible repulsion of the reduced functional group (ammonium group, -NH(3)(+)) from the protonated, i.e., positively charged TiO(2) surface in acidic suspensions avoiding re-oxidation of m-ABS. Using TiO(2) samples of various physical properties, which had been synthesized by a solvothermal method and post-calcination at various temperatures, effects of physical properties of the TiO(2) samples on m-ABS yield were also investigated. A linear correlation between the amount of m-NBS adsorbed and the m-ABS yield was observed, suggesting that ability of TiO(2) for m-NBS adsorption is one of the key factors for effective photocatalytic reduction of m-NBS to m-ABS. This photocatalytic system can be applied for reduction of aminonitrobenzenes to corresponding diaminobenzenes (DAB) in the presence of oxalic acid as a hole scavenger. High yields of m-ABS and DAB were achieved even when the reactions were performed in the presence of oxygen.     

Two-dimensional optical feedback control of Euglena confined in closed-type microfluidic channels

We examined two-dimensional (2D) optical feedback control of phototaxis flagellate Euglena cells confined in closed-type microfluidic channels (microaquariums), and demonstrated that the 2D optical feedback enables the control of the density and position of Euglena cells in microaquariums externally, flexibly, and dynamically. Using three types of feedback algorithms, the density of Euglena cells in a specified area can be controlled arbitrarily and dynamically, and more than 70% of the cells can be concentrated into a specified area. Separation of photo-sensitive/insensitive Euglena cells was also demonstrated. Moreover, Euglena-based neuro-computing has been achieved, where 16 imaginary neurons were defined as Euglena-activity levels in 16 individual areas in microaquariums. The study proves that 2D optical feedback control of photoreactive flagellate microbes is promising for microbial biology studies as well as applications such as microbe-based particle transportation in microfluidic channels or separation of photo-sensitive/insensitive microbes.     

Acylation of hydrazides with acetic acid and formic acid

In peptide synthesis, hydrazides are important intermediates for the azide coupling method. A hydrazide is converted to the corresponding azide in the presence of an acid and a nitrite. When acetic acid (or formic acid) is used as the acid, partial acetylation (or formylation) of the hydrazide occurs as a side reaction. Formylation of the hydrazide is much faster than acetylation. Removal of the formyl group on the hydrazide with hydrazine and hydroxylamine was studied. The rate of deformylation with hydrazine treatment is faster than that with hydroxylamine treatment.