Design, synthesis and characterization of a linear hydrogen bonded homologous series

A linear hydrogen bonded liquid crystalline homologous series has been synthesized and characterized. Hydrogen bond is formed between p-n-dodecyloxy benzoic acid and various p-n-alkyl benzoic acids whose alkyl chain vary from octyl to ethyl. Synthesized complexes are characterized by FTIR, ¹H NMR and ¹³C NMR studies for inferring the formation of hydrogen bonds. Polarizing Optical Microscopy (POM) and DSC studies reveal various mesophases and their corresponding transition temperatures along with respective enthalpy values. All the seven synthesized complexes exhibit rich liquid crystalline mesomorphism. A new phase namely smectic X has been observed in five of the complexes with a narrow thermal range. This phase has been characterized by optical textural, DSC, tilt angle and helicoidal pitch studies. Smectic X is sandwiched between traditional smectic C and re-entrant smectic C (designated as C_R) phases. Homeotropic transition in nematic phase is observed in all the mesogens and thus these materials can be used as thermally controlled optical shutters. Tilt angle in smectic C, smectic X and smectic C_R phases have been experimentally elucidated for all the mesogens.     

Design,synthesis and characterization of a linear hydrogen bonded homologous series exhibiting reentrant smectic C ordering

Design, synthesis and characterization of seven linear hydrogen bonded liquid crystal complexes derived from mesogenic p–n-decyloxy benzoic acid and p–n-alkyl benzoic acids designated as 10OØn (where n varied from ethyl to octyl) are reported. FTIR studies confirm the hydrogen bond formation in all these complexes. The phase transition temperatures and their corresponding enthalpy values are experimentally deduced from Differential Scanning Calorimetry (DSC) studies. POM and DSC data are further utilized for the construction of 10OØn phase diagram. Two Odd–even effects have been evinced, one in enthalpy values and the other in corresponding transition temperatures across the isotropic to nematic phase transition. An interesting result is the observation of re-entrant smectic ordering, designated as smectic C_R in three higher ordered mesogens. A new smectic ordering, smectic X, has been observed which is sandwiched between traditional smectic C and re-entrant smectic C_R. Magnitudes of optical tilt angle in smectic C, smectic X and smectic C_R are experimentally found to attain saturation with decrement of temperature in the corresponding phase. The occurrence of smectic X and smectic C_R are discussed with relation to the molecular chemical structure. The optical filtering action in smectic C and re-entrant smectic C_R phases have been analyzed.     

Practical choice of ¹H-¹H decoupling schemes in through-bond ¹H-{X} HMQC experiments at ultra-fast MAS

Three (1)H-(1)H homonuclear dipolar decoupling schemes for (1)H indirect detection measurements at very fast MAS are compared. The sequences require the following conditions: (i) being operable at very fast MAS, (ii) a long T(2)(') value, (iii) a large scaling factor, (iv) a small number of adjustable parameters, (v) an acquisition window, (vi) a low rf-power requirement, and (vii) a z-rotation feature. To satisfy these conditions a modified sequence named TIlted Magic-Echo Sandwich with zero degree sandwich pulse (TIMES(0)) is introduced. The basic elements of TIMES(0) consist of one sampling window and two phase-ramped irradiations, which realize alternating positive and negative 360° rotations of (1)H magnetization around an effective field tilted with an angle θ from the B(0) axis. The TIMES(0) sequence benefits from very large chemical shift scaling factors at ultra-fast MAS that reach κ(cs)=0.90 for θ=25° at ν(r)=80kHz MAS and only four adjustable parameters, resulting in easy setup. Long κ(cs)T(2)(') values, where T(2)(') is a irreversible proton transverse relaxation time, greatly enhance the sensitivity in (1)H-{(13)C} through-bond J-HMQC (Heteronuclear Multiple-Quantum Coherence) measurements with (1)H-(1)H decoupling during magnetization transfer periods. Although similar sensitivity can be obtained with through-space D-HMQC sequences, in which (13)C-(1)H dipolar interactions are recoupled, J-HMQC experiments incorporating (1)H-(1)H decoupling benefit from lower t(1)-noise, more uniform excitation of both CH, CH(2) and CH(3) moieties, and easier identification of through-bond connectivities.     

Proton line narrowing in solid-state nuclear magnetic resonance: new insights from windowed phase-modulated Lee-Goldburg sequence

We present here a bimodal Floquet analysis of the windowed phase-modulated Lee-Goldburg (wPMLG) sequence for homonuclear dipolar decoupling. One of the main criteria for an efficient homonuclear dipolar decoupling scheme is an effective z-rotation condition. This is brought about by the presence of radio-frequency imperfections in the pulse sequence together with a systematic manipulation of the wPMLG pulses. Additional improvement in the (1)H spectral resolution was obtained by a proper understanding of the off-resonance dependence of the wPMLG irradiation scheme based on bimodal Floquet theory. Numerical investigations further corroborate both theoretical and experimental findings. Theoretical analysis points to accidental degeneracies between the cycle time of the wPMLG sequence and the rotor period leading to the experimentally observed off-resonance dependence of the resolution. Two-dimensional (1)H-(1)H homonuclear single-quantum correlation spectra of model amino acids are also presented, highlighting the improved spectral resolution of wPMLG sequences.     

Spray dried excipient base: a novel technique for the formulation of orally disintegrating tablets

Orally disintegrating tablets (ODT) are gaining popularity over conventional tablets due to their convenience in administration and suitability for patients having dysphagia. Moreover no water is required for swallowing the tablets and hence suitable for geriatric, pediatric and traveling patients. The purpose of this study is to assess the suitability of spray dried excipient base in the formulation of ODTs of Valdecoxib (low aqueous solubility) and Metoclopramide (high aqueous solubility). Spray dried excipient base was prepared using Scientech spray drier. Super disintegrants (such as Ac-Di-Sol, Kollidon CL, sodium starch glycolate), diluent (mannitol) alongwith sweetening agent (aspartame) were used in the formulation of tablets. The tablets were evaluated for hardness, friability, water absorption ratio, disintegration time (DT) and in vitro drug release. Using the same excipients, the tablets were prepared by direct compression and were evaluated in the similar way. Maximum drug release and minimum DT were observed with Kollidon CL excipient base as compared to tablets prepared by direct compression, showing the superiority of the spray dried excipient base technique over direct compression technique.     

Synthesis and steric stabilization of silver nanoparticles in neat carbon dioxide solvent using fluorine-free compounds

The adjustable solvent properties, vanishingly low surface tensions, and environmentally green characteristics of supercritical carbon dioxide present certain advantages in nanoparticles synthesis and processing. Unfortunately, most current techniques employed to synthesize and disperse nanoparticles in carbon dioxide use environmentally persistent fluorinated compounds as metal precursors and/or stabilizing ligands. This paper illustrates a one-step process for synthesis and stabilization of silver nanoparticles in carbon dioxide using only fluorine-free compounds. Isostearic acid coated silver nanoaparticles were formed and stably dispersed through arrested precipitation. Silver bis(3,5,5-trimethyl-1-hexyl)sulfosuccinate (Ag-AOT-TMH) was reduced in the presence of isostearic acid as a capping ligand in carbon dioxide solvent to form silver nanoparticles. The addition of cyclohexane as cosolvent or an increase in carbon dioxide solvent density enhances the dispersibility of the particles due to an increase in solvent strength. The dispersibility of the isostearic acid capped silver nanoparticles diminished with time until a stable dispersion was achieved due to the precipitation of a fraction of particle sizes too large to be stabilized by the solvent medium, thereby leaving a smaller size fraction of nanoparticles stably dispersed in the CO2 mixtures. This paper presents the one-step synthesis and stabilization of metallic nanoparticles in neat carbon dioxide without the aid of any fluorinated compounds.     

A Fuzzy Vault Scheme

We describe a simple and novel cryptographic construction that we refer to as a fuzzy vault. A player Alice may place a secret value κ in a fuzzy vault and “lock” it using a set A of elements from some public universe U. If Bob tries to “unlock” the vault using a set B of similar length, he obtains κ only if B is close to A, i.e., only if A and B overlap substantially. In constrast to previous constructions of this flavor, ours possesses the useful feature of order invariance, meaning that the ordering of A and B is immaterial to the functioning of the vault. As we show, our scheme enjoys provable security against a computationally unbounded attacker. Fuzzy vaults have potential application to the problem of protecting data in a number of real-world, error-prone environments. These include systems in which personal information serves to authenticate users for, e.g., the purposes of password recovery, and also to biometric authentication systems, in which readings are inherently noisy as a result of the refractory nature of image capture and processing.     

Evaluation and Functional Characterization of a Biosurfactant Produced by Lactobacillus plantarum CFR 2194

The study details the investigations on the ability of Lactobacillus plantarum CFR 2194, an isolate from kanjika, a rice-based ayurvedic fermented product, to produce biosurfactant. Surfactant production, as a function of fermentation time, indicates that the maximum production occurred at 72 h under stationary conditions. Isolation, partial purification, and characterization of the biosurfactant produced have been carried out, and Fourier transform infrared spectroscopy (FTIR) spectra demonstrated that biosurfactants were constituted by protein and polysaccharide fractions, i.e., possessed the structure typical of glycoprotein, which is affected by the medium composition and the phase of growth of the biosurfactant-synthesizing strain. Critical micelle concentration (cmc) of the biosurfactant was found to be 6 g l^?1. The emulsification index (EI), emulsification activity (EA), and emulsion stability (ES) values of the biosurfactant have confirmed its emulsification property. Aqueous fractions of the produced biosurfactant exhibited a significant antimicrobial activity against the food-borne pathogenic species: Escherichia coli ATCC 31705, E. coli MTCC 108, Salmonella typhi, Yersinia enterocolitica MTCC 859, and Staphylococcus aureus F 722. More importantly, the biosurfactant from L. plantarum showed antiadhesive property against above food-borne pathogens. The results thus indicate the potential for developing strategies to prevent microbial colonization of food contact surfaces and health-care prosthesis using these biosurfactants.