Sulfate-enhanced catalytic destruction of 1,1,1-trichlorethane over Pt(111)

The catalytic destruction of 1,1,1-trichloroethane (TCA) over model sulfated Pt(111) surfaces has been investigated by fast X-ray photoelectron spectroscopy and mass spectrometry. TCA adsorbs molecularly over SO4 precovered Pt(111) at 100 K, with a saturation coverage of 0.4 monolayer (ML) comparable to that on the bare surface. Surface crowding perturbs both TCA and SO4 species within the mixed adlayer, evidenced by strong, coverage-dependent C 1s and Cl and S 2p core-level shifts. TCA undergoes complete dechlorination above 170 K, accompanied by C-C bond cleavage to form surface CH3, CO, and Cl moieties. These in turn react between 170 and 350 K to evolve gaseous CO2, C2H6, and H2O. Subsequent CH3 dehydrogenation and combustion occurs between 350 and 450 K, again liberating CO2 and water. Combustion is accompanied by SO4 reduction, with the coincident evolution of gas phase SO2 and CO2 suggesting the formation of a CO-SOx surface complex. Reactively formed HCl desorbs in a single state at 400 K. Only trace (<0.06 ML) residual atomic carbon and chlorine remain on the surface by 500 K.     

The changing of the guard: Molecular diversity and rapid evolution of β-defensins

Summary Defensins are small cationic peptides involved in innate immunity and are components of the first line of defence against invading pathogens. β-defensins are a subgroup of the defensin family that display a particular cysteine spacing and pattern of intramolecular bonding. These molecules are produced mostly by epithelia lining exposed surfaces and appear to have both antimicrobial and cell signalling functions. The unusually high degree of sequence variation in the mature peptide produced by the paralogous and in some cases orthologous genes implies extensive specialisation and species specific adaptation. Here we review recent functional data that are an important addition to our knowledge of the innate immune response and novel antibiotic design. We also consider the organisation and evolution of the genomic loci harbouring these genes where radical and rapid changes in β-defensin sequences have been shown to result from the interplay of both positive and negative selection. Consequently these genes provide some unusually clear glimpses of the processes of duplication and specialisation that have shaped the mammalian genome.     

Sperner Partition Systems

A Spernerk‐partition system on a set X is a set of partitions of X into k classes such that the classes of the partitions form a Sperner set system (so no class from a partition is a subset of a class from another partition). These systems were defined by Meagher, Moura, and Stevens in [6] who showed that if , then the largest Sperner k‐partition system has size . In this paper, we find bounds on the size of the largest Sperner k‐partition system where k does not divide the size of X, specifically, we give upper and lower bounds when , and .     

Evaporative characteristics of sessile nanofluid droplet on micro‐structured heated surface

Micro‐structure patterned substrates attract our attention due to the special and programmable wettabilities. The interaction between the liquid and micro/nano structures gives rise to controllable spreading and thus evaporation. For exploration of the application versatility, the introduction of nanoparticles in liquid droplet results in interaction among particles, liquid and microstructures. In addition, temperature of the substrates strongly affects the spreading of the contact line and the evaporative property. The evaporation of sessile droplets of nanofluids on a micro‐grooved solid surface is investigated in terms of liquid and surface properties. The patterned nickel surface used in the experiments is designed and fabricated with circular and rectangular shaped pillars whose size ratios between interval and pillars is fixed at 5. The behavior is firstly compared between nanofluid and pure liquid on substrates at room temperature. For pure water droplet, the drying time is relatively longer due to the receding of contact line which slows down the liquid evaporation. Higher concentrations of nanoparticles tend to increase the total evaporation time. With varying concentrations of graphite at nano scale from 0.02% to 0.18% with an interval at 0.04% in water droplets and the heating temperature from 22 to 85°C, the wetting and evaporation of the sessile droplets are systematically studied with discussion on the impact parameters and the resulted liquid dynamics as well as the stain. The interaction among the phases together with the heating strongly affects the internal circulation inside the droplet, the evaporative rate and the pattern of particles deposition.     

Practical Considerations for Continuum Models Applied to Surface Electrochemistry

Modelling the electrolyte at the electrochemical interface remains a major challenge in ab initio simulations of charge transfer processes at surfaces. Recently, the development of hybrid polarizable continuum models/ab initio models have allowed for the treatment of solvation and electrolyte charge in a computationally efficient way. However, challenges remain in its application. Recent literature has reported that large cell heights are required to reach convergence, which presents a serious computational cost. Furthermore, calculations of reaction energetics require costly iterations to tune the surface charge to the desired potential. In this work, we present a simple capacitor model of the interface that illuminates how to circumvent both of these challenges. We derive a correction to the energy for finite cell heights to obtain the large cell energies at no additional computational expense. We furthermore demonstrate that the reaction energetics determined at constant charge are easily mapped to those at constant potential, which eliminates the need to apply iterative schemes to tune the system to a constant potential. These developments together represent more than an order of magnitude reduction of the computational overhead required for the application of polarizable continuum models to surface electrochemistry.     

Exploring the feasibility of simultaneous electroencephalography/functional magnetic resonance imaging at 7 T

The increased blood oxygenation level-dependent contrast available at high field makes the implementation of combined EEG/fMRI experiments at 7 T highly worthwhile from the point of view of fMRI data quality, but the higher field poses greater technical challenges for achieving good quality EEG data. A study of the feasibility of recording EEG signals from human subjects at 7 T using a commercially available, MR-compatible EEG system has therefore been carried out. This involved systematic measurement of the sources of noise in EEG recordings made in the 7 T scanner and measurement of RF heating effects on a gel phantom in the presence of a 32-electrode EEG cap. Having found no significant safety concerns and identified a set-up (involving switching off the magnet's cryo-cooler pumps and mounting the EEG amplifier on a cantilever) that limited scanner-induced noise, combined EEG/fMRI experiments employing visual stimulation were then successfully carried out on two human subjects. With the use of beamformer-based analysis of the EEG data, driven responses and alpha-band, event-related desynchronisation were identified in both subjects.     

A Directly Patternable,Click‐Active Polymer Film via Initiated Chemical Vapor Deposition

Click‐active surfaces patterned at 200 nm resolution are demonstrated using the dual functional polymeric film, poly(propargyl methacrylate) (PPMA). The commercially available monomer of propargyl methacrylate (PMA) is polymerized in a single step by initiated chemical vapor deposition (iCVD). FT‐IR and X‐ray photoelectron spectroscopy confirm retention of the click‐active acetylene functional group in the bulk and surface of the iCVD film, respectively. Treating substrates with silane coupling agents prior to deposition results in grafting of iCVD PPMA polymers onto various inorganic surfaces. This grafting technique provides the chemical and mechanical stability required for the PPMA layer to survive the subsequent wet chemical steps used for click functionalization. Successful attachment of an azido‐functionalized coumarin dye is demonstrated. Moreover, the PPMA film displays direct positive‐tone sensitivity to e‐beam irradiation, which enables e‐beam patterning without the use of a resist layer. Direct e‐beam exposure of the multifunctional PPMA iCVD layer results in a 200 nm pattern to which quantum dot nanoparticles are selectively conjugated on the substrates by click chemistry.

     

Quantification of myo‐inositol, 1,5‐anhydro‐ D‐sorbitol,and D‐chiro‐inositol using high‐performance liquid chromatography with electrochemical detection in very small volume clinical samples

Inositol is a six‐carbon sugar alcohol and is one of nine biologically significant isomers of hexahydroxycyclohexane. Myo‐inositol is the primary biologically active form and is present in higher concentrations in the fetus and newborn than in adults. It is currently being examined for the prevention of retinopathy of prematurity in newborn preterm infants. A robust method for quantifying myo‐inositol (MI), D ‐chiro‐inositol (DCI) and 1,5‐anhydro‐ D ‐sorbitol (ADS) in very small‐volume (25 μL) urine, blood serum and/or plasma samples was developed. Using a multiple‐column, multiple mobile phase liquid chromatographic system with electrochemical detection, the method was validated with respect to (a) selectivity, (b) accuracy/recovery, (c) precision/reproducibility, (d) sensitivity, (e) stability and (f) ruggedness. The standard curve was linear and ranged from 0.5 to 30 mg/L for each of the three analytes. Above‐mentioned performance measures were within acceptable limits described in the Food and Drug Administration's Guidance for Industry: Bioanalytical Method Validation. The method was validated using blood serum and plasma collected using four common anticoagulants, and also by quantifying the accuracy and sensitivity of MI measured in simulated urine samples recovered from preterm infant diaper systems. The method performs satisfactorily measuring the three most common inositol isomers on 25 μL clinical samples of serum, plasma, milk, and/or urine. Similar performance is seen testing larger volume samples of infant formulas and infant formula ingredients. MI, ADS and DCI may be accurately tested in urine samples collected from five different preterm infant diapers if the urine volume is greater than 2–5 mL. Copyright © 2015 John Wiley & Sons, Ltd.