Methyl 3‐(4‐methoxyphenyl)prop‐2‐enoate

The title mol­ecule, C₁₁H₁₂O₃, is almost planar, with an average deviation of the C and O atoms from the least‐squares plane of 0.146 (4) Å. The geometry about the C=C bond is trans. The phenyl ring and –COOCH₃ group are twisted with respect to the double bond by 9.3 (3) and 5.6 (5)°, respectively. The endocyclic angle at the junction of the propenoate group and the phenyl ring is decreased from 120° by 2.6 (2)°, whereas two neighbouring angles around the ring are increased by 2.3 (2) and 0.9 (2)°. This is probably associated with the charge‐transfer interaction of the phenyl ring and –COOCH₃ group through the C=C double bond. The mol­ecules are joined together through C—H?O hydrogen bonds between the methoxy and ester groups to form characteristic zigzag chains extended along the c axis.     

Barrier-free intermolecular proton transfer induced by excess electron attachment to the complex of alanine with uracil

The photoelectron spectrum of the uracil-alanine anionic complex (UA)(-) has been recorded with 2.540 eV photons. This spectrum reveals a broad feature with a maximum between 1.6 and 2.1 eV. The vertical electron detachment energy is too large to be attributed to an (UA)(-) anionic complex in which an intact uracil anion is solvated by alanine, or vice versa. The neutral and anionic complexes of uracil and alanine were studied at the B3LYP and second-order M?ller-Plesset level of theory with 6-31++G(*) (*) basis sets. The neutral complexes form cyclic hydrogen bonds and the three most stable neutral complexes are bound by 0.72, 0.61, and 0.57 eV. The electron hole in complexes of uracil with alanine is localized on uracil, but the formation of a complex with alanine strongly modulates the vertical ionization energy of uracil. The theoretical results indicate that the excess electron in (UA)(-) occupies a pi(*) orbital localized on uracil. The excess electron attachment to the complex can induce a barrier-free proton transfer (BFPT) from the carboxylic group of alanine to the O8 atom of uracil. As a result, the four most stable structures of the uracil-alanine anionic complex can be characterized as a neutral radical of hydrogenated uracil solvated by a deprotonated alanine. Our current results for the anionic complex of uracil with alanine are similar to our previous results for the anion of uracil with glycine, and together they indicate that the BFPT process is not very sensitive to the nature of the amino acid's hydrophobic residual group. The BFPT to the O8 atom of uracil may be relevant to the damage suffered by nucleic acid bases due to exposure to low energy electrons.     

A comparison of microwave-accelerated and conventionally heated iodination reactions of some arenes and heteroarenes, using ortho-periodic acid as the oxidant

A fast and simple method for the oxidative iodination of some activated arenes and heteroarenes, either under microwave irradiation or by conventional heating, is reported, using diiodine and ortho-periodic acid as the oxidant. The reactions were carried out in hot 95% ethanol under a reflux condenser. For the microwave assisted reactions, the reaction times were always notably shortened, but the yields were nearly the same as those afforded by the conventional method.     

RP-HPLC study of redox equilibria in vanadium-PAR binary and ternary systems: Direct determination of vanadium in steel

The reversed-phase high-performance liquid Chromatographic (RP-HPLC) behaviour of the binary chelates of V(V) and V(IV) with 4-(2-pyridylazo) resorcinol (PAR) and ternary chelates of vanadium with PAR and auxiliary ligands: hydrogen peroxide, hydroxylamine, tartrate and citrate were studied using a C₁₈ column. The complex double-peak chromatograms of V(IV)/V(V)-PAR systems were studied and the origin of each peak was proved. Vanadium in ternary systems with PAR and hydrogen peroxide was found exclusively in V(V)-H₂O₂-PAR complex (single peak on the chromatogram) despite its initial oxidation state. The double role of hydroxylamine (complex agent and reductor) in vanadium systems with PAR was confirmed: in the V(V) system three species were identified (V(V)-PAR, V(V)-NH₂OH-PAR and V(IV)-PAR), but in the V(IV) system only two: V(IV)-PAR and V(V)-NH₂OH-PAR. Citrate and tartrate giving single peak were found as auxiliary ligands in ternary V(V) systems of analytical importance. Due to its masking potential towards iron (III) ions, citrate was chosen as the most suitable third component of a ternary vanadium system with PAR, to form the basis of an RP-HPLC method for direct determination of V in steel.     

Photochemical syn-anti isomerization reactions in N2-hydroxyisocytosines--an experimental matrix isolation and theoretical study

N2-hydroxyisocytosine and 1-methyl-N2-hydroxyisocytosine were studied using a matrix isolation technique combined with infrared absorption spectroscopy. For N2-hydroxyisocytosine isolated in an Ar matrix (at 10 K), two imino-oxo isomers, one with the hydroxyimino =N-OH group directed toward the N1-H group (the form called further anti) and the second with the =N-OH group directed toward N3-H (syn), were observed in the ratio 1.4:1. The syn isomer is converted totally to the anti form after UV (lambda > 295 nm) irradiation of the matrix. A small amount of the N(3)H-hydroxy-amino tautomer of N2-hydroxyisocytosine was also detected in the matrix. This form did not react photochemically. For 1-methyl-N2-hydroxyisocytosine, only the syn form of the imino-oxo tautomer was observed after deposition of the matrix. UV (lambda > 295 nm) irradiation induced a photoreaction converting this isomer into the anti form. After 15% of the starting material had been converted into the product, a photostationary state was achieved, and no further progress of the reaction was observed. Subsequent UV irradiation (lambda > 335 nm) caused a back reaction, leading to a disappearance of the anti form and to the recovery of the initial syn isomer. All isomers were identified by comparing their experimental IR spectra with the spectra theoretically calculated at the DFT(B3LYP)/6-31G(d,p) level, where DFT is the density functional theory. Good agreement between the observed and predicted patterns of the spectral lines allowed for reliable identification. The experimental IR spectra were interpreted and discussed. The relative energies of the 12 isomers of N2-hydroxyisocytosine were calculated at the MP2/6-31G(d,p) and MP4//MP2/6-31G(d,p) levels. For six isomers of 1-methyl-N2-hydroxyisocytosine, the calculations were carried out at the MP2/6-31G(d,p) level. The anti form of the imino-oxo tautomer of N-hydroxyisocytosine and the syn form of the imino-oxo tautomer of 1-methyl-N2-hydroxyisocytosine were predicted to be the most stable.     

Structural studies of 4-aryloctahydro-pyrido[1,2-c]pyrimidine derivatives

¹³C cross-polarisation magic angle spinning NMR data have been reported for four derivatives of 4-aryl-octahydro-pyrido[1,2-c]pyrimidine-1,3-dione and the X-ray diffraction data for two (with 2′-Me and 2′-OMe). The crystal structures show the presence of centrosymmetric cyclic dimers with intermolecular C1O?H-N or C3O?H-N hydrogen bonds, the configuration at the chiral centres (C4 and C4_a) was determined as RR (SS). The twisting of aromatic ring at C4 with respect to the pyrido[1,2-c]pyrimidine skeleton is about 68-109°.     

Stabilization of projection-based reduced order models of the Navier–Stokes

A new method of stabilizing low-order, proper orthogonal decomposition based reduced-order models of the Navier?CStokes equations is proposed. Unlike traditional approaches, this method does not rely on empirical turbulence modeling or modification of the Navier?CStokes equations. It provides spatial basis functions different from the usual proper orthogonal decomposition basis function in that, in addition to optimally representing the solution, the new proposed basis functions also provide stable reduced-order models. The proposed approach is illustrated with two test cases: two-dimensional flow inside a square lid-driven cavity and a two-dimensional mixing layer.     

Characterisation of anodic oxide films on zirconium formed in sulphuric acid: XPS and corrosion resistance investigations

Present work describes investigations of a two-step process consisting of galvanostatic anodising in a 1 M H₂SO₄ solution at 100 mA cm⁻² up to the limiting voltages of 20, 60, 80, 100 and 120 V, directly after which potentiostatic regime was employed and the current was allowed to drop. The total treatment time (5 min) was held constant for all samples. The treatment was carried out to improve the corrosion resistance of zirconium in physiological conditions, which was determined by electrochemical evaluation in Ringer’s solution. XPS studies revealed that after anodising sulphur was incorporated into the oxide film in the form of sulphated zirconia. The maximum content of sulphate in the oxide layer was observed after anodising at 80 V. Anodising at higher voltages resulted in formation of coatings with decreasing amount of sulphur. It was found that there is a strong correlation between the sulphur content in the oxide layers and the measured corrosion current density. On the other hand, the pitting corrosion resistance seemed to be unaffected by the presence of S and it was improving with the increasing limiting voltage of the treatment.