Dielectric studies of the 4-n-alkyl-4'-thiocyanatobiphenyl (nBT) homologous series (n=2-10) in the isotropic and E phases

Results of the dielectric studies of nine members of the nBT (4-n-alkyl-4'-thiocyanatobiphenyl, n= 2-10) homologous series in the crystal E (E) and isotropic (I) phases are presented. The dependence of the static permittivity ?_s in the isotropic phase, the longitudinal relaxation times τ_is and τ_∥, and the activation enthalpies ΔH _is and ΔH _∥ on the number of carbon atoms in the alkyl chain n are analysed. A considerable increase in the retardation factor g= τ_∥/τ_is with decreasing n is observed. The results are compared with those obtained for similar two-ring homologous series. The parameters characterizing the molecular rotations around the short axis in the E phase (τ_∥ and ΔH _∥) indicate a hardening of this solid-like phase with shortening of the alkyl chain.     

Influence of surfactants on the adsorption and elektrokinetic properties of the system: guar gum/manganese dioxide

The adsorption of non-ionic polysaccharide—guar gum (GG) in the presence or absence of the surfactants: anionic SDS, cationic CTAB, nonionic TX-100 and their equimolar mixtures SDS/TX-100, CTAB/TX-100 from the electrolyte solutions (NaCl, CaCl₂) on the manganese dioxide surface (MnO₂) was studied. The increase of GG adsorption amount in the presence of surfactants was observed in every measured system. This increase results from formation of complexes between the GG and the surfactant molecules. This observation was confirmed by the determination of the influence of GG on surfactants adsorption on the MnO₂ surface. The increase of GG adsorption on MnO₂ was the largest in the presence of the surfactant mixtures (CTAB/TX-100; SDS/TX-100) which is the evidence of the synergetic effect. The smallest amounts of adsorption were obtained in the presence of TX-100, which results from non-ionic character of this surface active agent. In the case of single surfactant solution CTAB has the best efficiency in increasing the amount of GG adsorption on MnO₂ which results from strong interactions with GG and also with the negatively charged surface of the adsorbent. In order to determine the electrokinetic properties of the system, the surface charge density of MnO₂ and the zeta potential measurements were performed in the presence of the GG macromolecules and the above mentioned surfactants and their mixtures. The obtained data showed that the adsorption of GG or GG/surfactants complexes on the manganese dioxide surface strongly influences the diffused part of the electrical double layer (EDL)—MnO₂/electrolyte solution, but has no influence on the compact part of the electric double layer. This is the evidence that the polymers chains are directly bonded with the surface of the solid and the surfactants molecules are present in the upper part of the EDL.     

Regioselective Short Synthesis of Epiisoborneol Neopentyl Ether as Chiral Auxiliary: An Absolute Configuration Reset

The regio-selective four step synthesis of (1S,2R,3S,4R)-4,7,7-trimethyl-3-(neopentyloxy)bicyclo[2.2.1]heptan-2-ol, as recognized efficient chiral auxiliary, is presented. The strategy based on opening of the key acetal 15 (=(2S,3aR,4S,7R,7aS)-2-tert-butyl-4,8,8-trimethylhexahydro-2H-4,7-methano-1,3-benzodioxole) thus circumvents the poor reactivity of the neopentyl electrophile under alkylation conditions. Following the same strategy, but using the unreported acetal 22 (=(2R,3aS,4S,7R,7aR)-2-tert-butyl-4,8,8-trimethylhexahydro-2H-4,7-methano-1,3-benzodioxole), the corresponding unreported bis-endo alcohol 23 (=(1R,2R,3S,4S)-3-(2,2-dimethylpropoxy)-4,7,7-trimethylbicyclo[2.2.1]heptan-2-ol) could be isolated only in poor yield. An alternative regioselective synthesis, including an ultimate endo-reduction remains to be found. Several erroneous chiroptical properties from the literature are corrected.     

Two-Parameter Fuzzy-Valued Stochastic Integrals and Equations

This article is concerned with notions of fuzzy-valued stochastic integrals driven by two-parameter martingales and increasing processes. We present their main properties and formulate next two-parameter fuzzy-valued stochastic integral equations. We establish the existence and uniqueness of solutions to such equations as well as their additional properties.     

Novel anhydrous proton conducting copolymers of 1‐vinyl‐1,2,4‐triazole and diisopropyl‐p‐vinylbenzyl phosphonate

Phosphonic acid functional polymers are currently of interest because of their high proton conductivity in humidified and anhydrous systems. In addition, heterocyclic compounds are used in anhydrous proton conducting polymer membranes. In that study, a new copolymer based on 1‐vinyl‐1,2,4‐triazole (VTri) and diisopropyl‐p‐vinylbenzyl phosphonate (VBP) was synthesized, and their thermal, chemical, and proton conducting properties were investigated. The copolymers were synthesized by free radical copolymerization of the corresponding monomers at several monomer feed ratios to obtain P(VTri‐co‐VBP) copolymers. The copolymer samples were then hydrolyzed to produce poly(vinyl triazole‐co‐vinyl phosphonic acid) copolymers. The composition of the copolymers was determined by elemental analysis. The copolymerization and hydrolysis reactions were verified by Fourier transform infrared spectroscopy and ion exchange capacity measurements. Thermogravimetry analysis indicates that the copolymers are thermally stable up to 300°C. In order to increase the proton conductivity, the copolymers were doped with H₃PO₄ at several stoichometric ratios. The proton conductivity increases with triazole and phosphoric acid content. In the absence of humidity, the copolymer electrolyte, P(VTri‐co‐VBPA)1:0.5 X = 2, showed a proton conductivity of 0.005 S/cm at 150°C. Copyright © 2013 John Wiley & Sons, Ltd.     

Palladium‐Catalyzed Stereoselective Intramolecular Oxidative Amidation of Alkenes in the Synthesis of 1,3‐ and 1,4‐Amino Alcohols and 1,3‐Diamines

An efficient and practical Pd‐catalyzed intramolecular oxidative allylic amidation provides facile access to derivatives of 1,3‐ and 1,4‐amino alcohols and 1,3‐diamines. The method operates under mild reaction conditions (RT) with molecular oxygen (1 atm) as the sole reoxidant of Pd. Excellent diastereoselectivities were attained with substrates bearing a secondary stereogenic center     

Reactions of Nucleophiles with Nitroarenes: Multifacial and Versatile Electrophiles

In this overview, it is shown that there are many initial reactions between nitroarenes and nucleophiles: addition to the electron‐deficient ring at positions occupied by halogen and hydrogen atoms, addition to the nitro group, single‐electron transfer (SET), and other types of initial reactions. The resulting intermediates react further in a variety of ways to form products of nucleophilic substitution of a halogen atom (S_NAr), a hydrogen atom (S_NArH), and others. Many variants of these processes are briefly discussed, particularly in relation of rates of the initial reactions and further transformations.     

Photodynamic Therapy Efficacy Enhanced by Dynamics: The Role of Charge Transfer and Photostability in the Selection of Photosensitizers

Progress in the photodynamic therapy (PDT) of cancer should benefit from a rationale to predict the most efficient of a series of photosensitizers that strongly absorb light in the phototherapeutic window (650–800 nm) and efficiently generate reactive oxygen species (ROS=singlet oxygen and oxygen‐centered radicals). We show that the ratios between the triplet photosensitizer–O₂ interaction rate constant (k_D) and the photosensitizer decomposition rate constant (k_d), k_D/k_d, determine the relative photodynamic activities of photosensitizers against various cancer cells. The same efficacy trend is observed in vivo with DBA/2 mice bearing S91 melanoma tumors. The PDT efficacy intimately depends on the dynamics of photosensitizer–oxygen interactions: charge transfer to molecular oxygen with generation of both singlet oxygen and superoxide ion (high k_D) must be tempered by photostability (low k_d). These properties depend on the oxidation potential of the photosensitizer and are suitably combined in a new fluorinated sulfonamide bacteriochlorin, motivated by the rationale.     

Stability of manganese dioxide by guar gum in the absence or presence of surfactants

Stability of the manganese dioxide (MnO₂) suspensions by non-ionic guar gum (GG) in the absence or presence of the surfactants: anionic sodium dodecyl sulphate (SDS), cationic hexadecyltrimethylammonium bromide (CTAB) and non-ionic Triton X-100 (t-octylphenoxypolyethoxyethanol) and their equimolar mixtures (SDS/TX-100; CTAB/TX-100) was measured using turbidity. The obtained results of the manganese dioxide suspensions stability were discussed together with the adsorption data and with the data concerning the thicknesses of the adsorption layers. In order to gain more information about the structure of the electric double layer surface charge density and the zeta potential measurements were performed. The obtained results show that the addition of guar gum to the MnO₂ suspensions increases MnO₂ stability. The larger this increase is, the higher is the concentration of the polymer (concentration range 10–200 ppm). Moreover, the addition of single surfactants also causes the increase in the effectiveness of stabilizing the manganese dioxide suspensions. The reason for that is formation of multilayer complexes between the polymer and the surfactants. In such a system both the adsorption of polymer and the thickness of polymer adsorption layer increase. The greatest increase in the stability of MnO₂/GG suspensions was provided by the mixture of anionic and non-ionic surfactants due to a strong synergistic effect. Also, mixing the polymer and two surfactants reduces the stability of the suspension.