Cross-flow heat transfer in fixed bed

Radial flow reactor operated at cross-flow heat transfer is focused for large scale methanol synthesis. The effects of operating conditions including the reactor inlet air temperature, the heating pipe temperature and the air flow rate on the cross-flow heat transfer were investigated and results show that the temperature profile of the area in front of the heating pipe is slightly affected by all the operating conditions. The main area whose temperature profile is influenced is located behind the heating pipe. The heat transfer direction is related to the direction of the flow. In order to obtain the basic parameters for radial flow reactor designing calculation, the dimensionless number group method was used for data fitting of the bed effective thermal conductivity and the wall heat transfer coefficient which were calculated by the mathematical model with the product of Reynolds number and Prandtl number. The comparison of experimental data and calculated values shows that the calculated values fit the experimental data satisfactorily and the formulas can be used for reactor designing calculation.     

Estimating ellipticity of a fiber core using two types of interferometry

In the present work two types of low-coherence interferometry are used to estimate the ellipticity of the core of an optical fiber in the cross section. Using the time-domain low-coherence interferometry the group-index difference between the degenerate high-order modes is measured. Because of the usage of a short fiber sample the group-index difference between the degenerate fundamental modes is too small to measure. Secondly, a frequency-domain low-coherence interferometry is presented in details. Since it is an all-fiber setup, longer fiber is allowed to be used. The high-order modes are filtered. The group-index difference between the degenerate fundamental modes is obtained. For each of the methods the experimental results are used to estimate the ellipticity of the fiber core in numerical simulations.     

Effect of additives on the structure and electrochemical performance of mesoporous nickel hydroxide

Nickel hydroxide mesoporous structures are synthesized by a simple method in the presence of different additives (oxalic acid, aminoacetic acid, and sulfosalicylic acid). Structural characterizations reveal that the additives can affect the crystal structure, increase the specific surface area, and reduce the pore size of the products. The electrochemical properties of the synthesized Ni(OH)₂ samples are dependent on their crystal phase, surface area, and pore size distribution. Mesoporous β-Ni(OH)₂ with poor crystallinity shows high specific capacitances at different current densities and excellent cycling ability. A highest specific capacitance of 1,693 F?g^?1 can be achieved at a scan rate of 5 mV?s^?1. The results suggest its potential application in electrochemical supercapacitors.     

Circuit simulation for synchronization of a fractional-order and integer-order chaotic system

We design a new three-dimensional double-wing fractional-order chaotic system with three quadratic terms, confirmed by numerical simulation and circuit implementation. We then study the synchronization between the new double-wing fractional-order chaotic system and different Lorenz systems with different structures. In the process of the synchronization, the definition of ‘the simplest response system’ and the practical method of designing the circuit have been originally proposed. The circuit of ‘the simplest response system’ (even the simplest incommensurate-order response system), holding different structures with the drive system, of any one integral or fractional drive system now can be designed effectively and sufficiently. Our results are supported by numerical simulation and circuit implementation.     

Investigation on the Tribological Properties of POM Modified by Nano-PTFE

The tribological properties of polyoxymethylene (POM) modified by nano-polytetrafluorethylene (nano-PTFE) were investigated by a block-on-ring wear tester. For comparison, modified POM with micro-polytetrafluoroethylene (micro-PTFE) was also studied. The modified POM with a much lower concentration of nano-PTFE showed the similar tribological properties compared with POM modified by micro-PTFE. The friction coefficient decreased with the increase of nano-PTFE, while the wear rate showed the lowest value when the concentration of nano-PTFE was 2%. Scanning electron microscope (SEM) micrographs revealed that transfer films played an important role in the friction process. The transfer films decreased and stabilized the friction coefficient. Comparing to POM/2%nano-PTFE, when the concentration of nano-PTFE reached 4%, the mechanical properties decreased significantly, possibly due to poor dispersion of nano-PTFE.