Electrogenerated Chemiluminescence Based on Tris(2,2′-bipyridyl) Ruthenium(II) with Hydroxyl Carboxylic Acid

Upon the electrochemical oxidation of tris(2,2′-bipyridyl) ruthenium(II) [Ru(bpy)²⁺₃] and hydroxyl carboxylic acids, for instance, citric acid, tartaric acid, malic acid, and -gluconic acid, bright electrochemiluminescences (ECLs) were observed. Different luminescent reactions were presented depending on the applied potential. The light emission was mainly caused by the reaction between alkoxide radical ion and Ru(bpy)³⁺₃below the potential +1.80 V (vs Ag/AgCl). The luminescence intensity obviously increased because of the more complex reaction process. The luminescence wavelength of 608 nm, which could be found either at higher potential than +1.80 V or in the potential range from +1.30 to +1.80 V, confirmed that ECL was caused by Ru(bpy)²⁺₃*. The factors which affect the determination and HPLC separation of the four acids were also investigated.     

混合配体、希土三元配合物的研究 Ⅳ.3,5—二硝基水扬酸(H_2DNSA)、邻菲咯啉(phen)、希土(RE)三元固体配合物的合成及性质

本文报道了十种希土元素与3,5-二硝基水扬酸、邻菲咯啉三元配合物的制备方法。通过元素和化学分析测定了化合物的化学组成,并用红外光谱、紫外光谱、差热分析、磁化率、X射线粉天衍射等对所合成的化合物进行了结构和性质的研究。     

cotpp-pt/c作直接甲醇燃料电池阴极催化剂

四苯基钴卟啉;pt催化剂;直接甲醇燃料电池;氧还原     

智能性水凝胶

“智能”材料具有传感、处理和执行功能，水凝胶作为智能材料其应用前景良好。本文综述了智能水凝胶的近期研究发展，以Ｆｌｏｒｙ的溶胀理论着重探讨了刺激响应性，并介绍了化学机械现象及凝胶相转变。     

Gear-like array of (H_2O)_(12) as building blocks in one-dimensional supramolecular assembly

The preparation and crystal structure of complex Co(Hsae)_2·2H_2O (1,H_2sae=N-salicylidene-2-iminoethanol) are reported.X- ray analysis revealed that every six Co(Hsae)_2 forms a cyclic chip and every 12 water forms a novel gear-like cluster.Acting as building blocks,the gear-like water cluster and complex chip are connected in A-B fashion and extend into one-dimensional supramolecular chain.Hydrogen bond is the primary bridging force in the formation of supramolecular framework.     

还原对Ag/SiO2催化剂高效合成吲哚的影响

以Ag／SiO2作为苯胺和乙二醇一步合成吲哚的催化剂，首次研究了还原对催化剂活性和选择性的影响．结果表明，催化剂前体在150℃以下用氢气含量不超过50%(mol)的氢-氮混合气原位还原其活性和选择性较高．     

环戊二烯热聚产物及二聚环戊二烯加氢产物的质谱

本实验用色谱－质谱－计算机联用仪测定了环戊二烯热聚产物及双环戊二烯加氢产物的质谱，讨论了环状化合物的开裂规律，有开环断裂反应及骨架重排等问题。     

制备方法对MoO_3／ZrO_2结构的影响及MoO_3／ZrO_2固体超强酸的结构特征 Ⅰ．ZrO_2的形态与样品比表面的研究

ＸＲＤ，ＤＴＡ，比表面测定等结果表明，制备方法对ＭｏＯ３／ＺｒＯ２结构有决定性影响．仲钼酸铵浸渍仅经干燥的Ｚｒ（ＯＨ）４再经高温焙烧所得团体超强酸ＭｏＯ３／ＺｒＯ２（Ⅰ）与浸渍晶态ＺｒＯ２所得部分氧化催化剂ＭｏＯ３／ＺｒＯ２（Ⅱ）的载体形态有明显不同．（１）ＭｏＯ３／ＺｒＯ２（Ⅰ）的比表面数倍于ＭｏＯ３／ＺｒＯ２（Ⅱ）；（２）ＭｏＯ３含量增加时，ＭｏＯ３／ＺｒＯ２（Ⅰ）的比表面逐步增大至一极大值再缓缓下降，而ＭｏＯ３／ＺｒＯ２（Ⅱ）的比表面随ＭｏＯ３含量增加而单调下降；（３）在ＭｏＯ３／ＺｒＯ２（Ⅰ）中，ＺｒＯ２以介稳四方相存在，而在ＭｏＯ３／ＺｒＯ２（Ⅱ）中则是稳定的单斜相．在此基础上研究了事先引入的活性组分在载体织构形成过程中的作用，包括延迟ＺｒＯ２晶化，阻碍晶粒长大及与之相关的相变等，并讨论了ＭｏＯ３／ＺｒＯ２（Ⅰ）中ＭｏＯ３最佳含量的科学含义．     

拉胀聚合物

本文简要介绍了几种经特殊加工制成的拉胀高聚物，粗线条地描述了目前国际上对拉胀聚合物的拉胀机理或拉胀性的研究，并展望了拉胀高分子材料的研究和应用前景。