Nano liquid-metal fluid as ultimate coolant

We proposed for the first time the concept of the nano liquid-metal fluid, aiming to establish an engineering route to make the highest conductive coolant. Using several widely accepted theoretical models for characterizing the nano fluid, the thermal conductivity enhancement of the liquid-metal fluid due to addition of more conductive nano particles was predicted. Further, the effects of particle size, cluster of nano particle, solid-like layer due to adsorption, volume fraction and particle types were evaluated. Having the highest conductivity, being electromagnetically drivable, the liquid metal with low melting point is expected to be an idealistic base fluid for making super conductive solution which may lead to the ultimate coolant in a wide variety of heat transfer enhancement area.     

Improving nucleation in the fabrication of high-quality 3D macro-porous copper film through the surface-modification of a polystyrene colloid-assembled template

A new approach is developed to the fabrication of high-quality three-dimensional macro-porous copper films. A highly-ordered macroporous copper film is successfully produced on a polystyrene sphere (PS) template that has been modified by sodium dodecyl sulfate (SDS). It is shown that this procedure can change a hydrophobic surface of PS template into a hydrophilic surface. The present study is devoted to the influence of the electrolyte solution transport on the nucleation process. It is demonstrated that the permeability of the electrolyte solution in the nanochannels of the PS template plays an important role in the chemical electrodeposition of high-quality macroporous copper film. The permeability is drastically enhanced in our experiment through the surface modification of the PS templates. The method could be used to homogeneously produce a large number of nucleations on a substrate, which is a key factor for the fabrication of the high-quality macroporous copper film.     

Preparation and characterization of a poled nanocrystal and polymer composite PbTiO3/PEKc film for electro-optic applications

Composite thin films of PbTiO₃ nanocrystals and high-transparency PEKc polymer for applications in electro-optical devices were prepared using the spin coating technique. The size of the PbTiO₃ nanocrystals was estimated to be 30–40 nm using a transmission electron microscope. The transmission technique, a simple method for measuring the electro-optic coefficients of poled composite polymer films was developed. The electro-optic coefficient γ₃₃ of poled PbTiO₃/PEKc composite polymer films was measured to be 18.34 pm  V^-1 at 633 nm under room temperature. The index at 633 nm and the dielectric constant at 100 kHz under room temperature were determined to be 1.65248 and 7.32, respectively. The figure of merit F₂=n⁷γ²/ε was estimated to be 1546, showing very good electro-optical properties. Received: 5 February 2002 / Accepted: 12 March 2002 / Published online: 19 July 2002 RID="*" ID="*"Corresponding author. Fax: +852/2788-7791, E-mail: eeytc@cityu.edu.hk     

Measurement of aerosol size distribution functions by wavelength-multiplexed laser extinction

Previous work on the measurement of aerosol size distribution functions (SDFs) by laser extinction mainly relied on light sources from a relatively narrow wavelength range. This paper investigates the potential advantages of extending the extinction method to a general wavelength-multiplexed laser extinction (WMLE) concept by incorporating an arbitrary number of laser sources from a wider wavelength range. This extension improves the sensitivity of SDF measurements over wider aerosol diameter ranges and enables a stable algorithm to invert the extinction data to obtain SDFs. These advantages are illustrated by an example WMLE scheme employing wavelengths in the spectral range from 0.25 to 10μm to measure SDFs of water aerosols. Application of this approach to other aerosol systems is also considered. The WMLE scheme was found to provide stable determination of a variety of SDFs with Sauter mean diameters ranging from sub-micron to about 10μm. The sensitivity of such determinations was evaluated to reveal the optimum applicable range of the wavelengths employed. The analyses performed here provide theoretical background and motivation for practical applications of the WMLE concept.     

双层金属锥形扁壳的非线性热稳定性

本文提出有关双层金属锥形扁壳在均匀温度场作用下的非线性稳定性的一般理论.将双层壳体的基本方程简化为与经典壳体理论相似的形式,通过比拟,以作用于锥形扁壳边界上的均匀分布的相当边界力矩来替换温度效应,采用修正迭代法求解.文中给出了临界跳跃力矩曲线.它对于工程上各种仪表弹性元件的设计具有一定的参考价值.     

类金钢石非晶碳薄膜的光吸收和光致发光研究

我们用激光轰击石墨靶成功地制备出类金刚石无氢非晶碳薄膜.测量了光学吸收、光致发光及其随入射光强度的变化关系.结果表明,这种薄膜具有类金刚石的性质,光学带隙在1.67-2.25eV,发光在可见光区呈宽带结构.低激发强度下发光强度超线性变化,而在高激发强度下则为线性发光.我们用非成对载流子复合的模型对结果给出了合理的解释.用带尾态饱和的模型解释了发光峰值随激发光强增加而蓝移的现象.     

Structured mirror array for two-dimensional collimation of a chromium beam in atom lithography

Direct-write atom lithography,one of the potential nanofabrication techniques,is restricted by some difficulties in producing optical masks for the deposition of complex structures.In order to make further progress,a structured mirror array is developed to transversely collimate the chromium atomic beam in two dimensions.The best collimation is obtained when the laser red detunes by natural line-width of transition 7S3 → 7P40 of the chromium atom.The collimation ratio is 0.45 vertically(in x axis),and it is 0.55 horizontally(in y axis).The theoretical model is also simulated,and success of our structured mirror array is achieved.     

Pulsed microwave damage trend of bipolar transistor as a function of pulse parameters

In the present paper we conduct a theoretical study of the thermal accumulation effect of a typical bipolar transistor caused by high power pulsed microwave (HPM), and investigate the thermal accumulation effect as a function of pulse repetition frequency (PRF) and duty cycle. A study of the damage mechanism of the device is carried out from the variation analysis of the distribution of the electric field and the current density. The result shows that the accumulation temperature increases with PRF increasing and the threshold for the transistor is about 2 kHz. The response of the peak temperature induced by the injected single pulses indicates that the falling time is much longer than the rising time. Adopting the fitting method, the relationship between the peak temperature and the time during the rising edge and that between the peak temperature and the time during the falling edge are obtained. Moreover, the accumulation temperature decreases with duty cycle increasing for a certain mean power.     

Novel loop-like solitons for generalized Vakhnenko equation

A nontraveling wave solution of a generalized Vakhnenko equation arising from the high-frequent wave motion in a relaxing medium is derived via the extended Riccati mapping method. The solution includes an arbitrary function of an independent variable. Based on the solution, two hyperbolic functions are chosen to construct new solitons. Novel single-loop-like and double-loop-like solitons are found for the equation.     

基于多重散射强度和偏振特征的舰船尾流气泡激光探测方法

研究多重散射效应对舰船尾流气泡群光散射强度和偏振特征的影响是舰船光尾流探测以及新型光自导鱼雷研究的基础. 基于矢量Monte Carlo方法建立了舰船尾流气泡群激光后向探测仿真模型, 重点研究了尾流气泡群的多重散射机理,分析了多重散射效应、尾流气泡群密度对回波信号强度和偏振特征的影响规律. 基于粒子碰撞重要性抽样的基本思想, 在传统能量接收方法的基础上, 提出了回波光子偏振贡献接收方法和回波信号偏振信息统计方法, 解决了小视场系统光子返回概率低无法形成回波能量的难题. 构建了模拟尾流气泡群激光散射强度和偏振探测实验平台, 从实验的角度验证了模拟结果的准确性. 实验和模拟结果的一致性表明, 利用回波强度、偏振信息可表征气泡群距离、密度信息, 从而可对舰船尾流特别是低密度尾流进行高精度的探测和辨识. 关键词： Monte Carlo 偏振 多重散射 气泡