Self-assembly of highly oriented one-dimensional h-WO3 nanostructures

A new self-assembled and highly oriented one-dimensional single-crystal nanostructure of WO3 with hexagonal form was successfully prepared by a mild, solution-based colloidal approach.     

Use of p-dimethylaminobenzalhyde as a colored reagent for determination of procaine hydrochloride by spectrophotometry

Spectrophotometric determination of procaine hydrochloride is described. The procaine hydrochloride reacts with p-dimethylaminobenzalhyde in glacial acetic acid to form an Schiff base which is a yellow compound, and its maximum absorption wavelength is at 455nm, ₄₅₅=3.46×10⁴. The absorbance for procaine hydrochloride from 0.2 to 15 μg ml⁻¹ obeys Beer's law. The linear regression equation of the calibration graph is C=5.866A−0.02, with a linear regression correlative coefficient is 0.9994 and relative standard deviation (RSD) of 1.7%; the detection limit is 0.1 μg ml⁻¹; recovery is from 92.0 to 110.0%. Effects of reaction medium, temperature, gentamycin, beneylpenicillin, kanamycin, streptomycin, foreign ions, and stand for time on the determination of procaine hydrochloride have been examined. The results obtained by this method agreed with those by the official method (dead-stop titration). This method is rapid and simple, and can be used for the determination of procaine hydrochloride in injection solution of procaine hydrochloride.     

Synthesis of quinolines, 2-quinolones, phenanthridines, and 6(5h)-phenanthridinones via palladium[0]-mediated Ullmann cross-coupling of 1-bromo-2-nitroarenes with beta-halo-enals, -enones, or -esters

Palladium[0]-mediated Ullmann cross-coupling of 1-bromo-2-nitrobenzene (1 R = H) and its derivatives with a range of beta-halo-enals, -enones, or -esters readily affords the corresponding beta-aryl derivatives, which are converted into the corresponding quinolines, 2-quinolones, phenanthridines, or 6(5H)-phenanthridinones on reaction with dihydrogen in the presence of Pd on C or with TiCl(3) in aqueous acetone. [reaction: see text]     

Organic synthesis on the microgram scale. V

Summary This paper describes a method for theg synthesis of flavone acetates in a sealed capillary tube. The reaction products are separated and purified on a thin-layer plate. The esters are then hydrolyzed on the plate and the parent flavones regenerated. A simple heating device is used which allows for observation of the reaction.

---

Zusammenfassung Beschreibung der Mikrogrammsynthese von Flavonacetaten in einem verschmolzenen Kapillarröhrchen. Die Reaktionsprodukte werden auf einer Dünnschichtplatte getrennt und gereinigt. Dann verseift man die Ester auf der Platte und stellt die freien Flavone dar. Ein einfaches Heizgerät ermöglicht die Beobachtung der Reaktion.

---

---

For part IV of this series see Mikrochim. Acta [Wien]1969, 352.     

Study of the Fluorescence System of Europium–Enoxacin and its Applications

 This paper is the study of the fluorescence enhancement of Eu³⁺-1-ethyl-6-fluoro-4-oxo-7-(1-piperazinyl)-1,8-naphthyridin-3-carbonic acid (enoxacin, EFLX) system by surfactants. It was found that sodium dodecylbenzenesulfonate (SDBS) exhibits great enhancement on the fluorescence of the Eu-EFLX system. The molar ratio is 1:2:1 for Eu:EFLX: SDBS. Under the optimum conditions, the fluorescence intensity is a linear function of europium in the range of 1.0 × 10⁻⁸ ∼ 5.0 × 10⁻⁶ mol/L, the detection limit is 1.0 × 10⁻⁹ mol/L. The application of the Eu-EFLX-SDBS system for the determination of trace europium in rare earth samples gave satisfactory results. Received October 19, 2000. Revision August 10, 2001.     

Atomic-absorption spectrometric determination of cobalt,nickel, and copper in geological materials with matrix masking and chelation-extraction

An atomic-absorption spectrometric method is reported for the determination of cobalt, nickel, and copper in a variety of geological materials including iron- and manganese-rich, and calcareous samples. The sample is decomposed with HP-HNO₃ and the residue is dissolved in hydrochloric acid. Ammonium fluoride is added to mask iron and 'aluminum. After adjustment to pH 6, cobalt, nickel, and copper are chelated with sodium diethyl-dithiocarbamate and extracted into methyl isobutyl ketone. The sample is set aside for 24 h before analysis to remove interferences from manganese. For a 0.200-g sample, the limits of determination are 5–1000 ppm for Co, Ni, and Cu. As much as 50% Fe, 25% Mn or Ca, 20% Al and 10% Na, K, or Mg in the sample either individually or in various combinations do not interfere. Results obtained on five U.S. Geological Survey rock standards are in general agreement with values reported in the literature.     

Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.     

PA.FPNS: its synthesis and use in spectrophotometric determination of magnesium

A new polymeric chromogenic reagent PA.FPNS has been synthesized by condensing polyallylamine (PA) with 3-(4-formylphenylazo)-4,5-dihydroxynaphthalene-2,7-disulfonic acid (FPNS) and its properties studied. In alkaline media, PA.FPNS reacts with magnesium to form a water-soluble blue complex, whose absorption maximum is at 604 nm. The molar absorptivity (varepsilon) of the complex is 5.2 x 10(4)l mol(-1) cm(-1), which is four times that of the FPNS-Mg complex, and Beer's law is obeyed over the range 0-0.35 mug ml(-1) magnesium. Compared to the corresponding low-molecular-weight FPNS and other chromogenic reagents, PA.FPNS offers considerably improved sensitivity and selectivity for magnesium, which may be attributed to incorporating FPNS into a water-soluble polymer and the effect of the polymeric chain on the reaction microenvironment. Also, a simple and sensitive spectrophotometric method for the determination of magnesium has been developed and applied to water and human fluid samples with satisfactory results.     

Interaction of tetrandrine with human serum albumin: a fluorescence quenching study.

The interaction of tetrandrine with human serum albumin (HSA) was studied by measuring fluorescence quenching spectra, synchronous fluorescence spectra and ultra-violet spectra. The fluorescence quenching spectra of HSA in the presence of tetrandrine showed that tetrandrine quenched the fluorescence of HSA. The quenching constants of tetrandrine on HSA were determined using the Stern-Volmer equation. Static quenching and non-radiation energy transfer were the two main reasons leading to the fluorescence quenching of HSA by tetrandrine. According to the F?rster theory of non-radiation energy transfer, the binding distances (r) and the binding constants (K(A)) were obtained. The thermodynamic parameters obtained in this study revealed that the interaction between tetrandrine and HSA was mainly driven by a hydrophobic force. The conformational changes of HSA were investigated by synchronous spectrum studies.