Determination of tyrosine traces by adsorption voltammetry of its copper (II) complex

The electrochemical behavior of the copper-tyrosine complex has been studied by linear-sweep adsorption voltammetry. In 0.02 mol/L Na₂HPO₄ buffer solution (pH=9.6), the complex can be adsorped on a hanging mercury drop electrode and reduced at a peak potential of about –0.42 V (vs. SCE). The secondary derivative peak height is linear proportional to the concentration of tyrosine in the range 1.0×10^–7–5.0×10^–5 mol/L. The detection limit is 5×10^–8 mol/L.Project supported by the Provincial Science Foundation of Shandong Province     

Structure and magnetic properties of nanocrystalline ferromagnets (II)

The role of magnetoelastic coupling effects in nanocrystalline ferromagnets is investigated by means of high-field magnetization and Doppler-broadening spectrum measurements. For the nanocrystalline Fe_{73 5}Cu₁Nb₃Si_13.5B₉ alloy, the results show that the pinning effects resulting from the quasidislocation dipole intensely influence the movement of domain wall; by coupling with the magnetostriction the defects-induced stress fields determine the magnetic properties at the early stage of crystallization. In view of the effective anisotropy and magnetoelastic coupling energy the optimal annealing conditions of alloys are discussed.     

On the existence and the stability of solutions for higher-order semilinear Dirichlet problems

We investigate the existence and stability of solutions for higher-order two-point boundary value problems in case the differential operator is not necessarily positive definite, i.e. with superlinear nonlinearities. We write an abstract realization of the Dirichlet problem and provide abstract existence and stability results which are further applied to concrete problems.     

FTIR spectroscopic study on the interaction between a fluoroionophore and metal ions.

A fluoroionophore sensor, N-[4-(1-pyrene)butyroyl]-L-tryptophan (PLT), has been reported. It can distinguish lead ion from other 12 metal ions via forming a pyrene dimer and it exhibits a very high sensitivity (0.15 microM) in aqueous solution (Chem. Commun., 2006, 2702). When the indole moiety in PLT was changed to benzene, in forming a new fluoroionophore of N-[4-(1-pyrene)butyroyl]-L-phenylalanine (PLP), it could not form a pyrene dimer in response to Pb(2+) in water. The present study describes the spectroscopic clarification of the intrinsic differences of the binding model between PLP and PLT in binding with Pb(2+). The model shows identical chelating bidentate coordination between COO(-) and Pb(2+) both in PLP-Pb and PLT-Pb; however, there is no indication of the interaction between the phenyl ring and the metal ion or the hydrogen bonding between amide groups in PLP-Pb. These differences in the binding model between PLP-Pb and PLT-Pb illustrate that the indole ring in PLT appears to play a crucial role in the high selectivity and sensitivity of PLT to lead(II) ion.     

Influence of organic modifiers on morphology and crystallization of poly(ϵ‐caprolactone)/synthetic clay intercalated nanocomposites

ε‐caprolactone was polymerized in the presence of neat montmorillonite or organomontmorillonites to obtain a variety of poly(ε‐caprolactone) (PCL)‐based systems loaded with 10 wt % of the silicates. The materials were thoroughly investigated by different X‐ray scattering techniques to determine factors affecting structure of the systems. For one of the nanocomposites it was found that varying the temperature in the range corresponding to crystallization of PCL causes reversible changes in the interlayer distance of the organoclay. Extensive experimental and literature studies on this phenomenon provided clues indicating that this effect might be a result of two‐dimensional ordering of PCL chains inside the galleries of the silicate. Small angle X‐ray scattering and wide angle X‐ray scattering investigation of filaments oriented above melting point of PCL revealed that polymer lamellae were oriented perpendicularly to particles of unmodified silicate, while in PCL/organoclay systems they were found parallel to clay tactoids. Calorimetric and microscopic studies shown that clay particles are effective nucleating agents. In the nanocomposites, PCL crystallized 20‐fold faster than in the neat polymer. The crystallization rate in nanocomposites was also significantly higher than in microcomposite. Further research provided an insight how the presence of the filler affects crystalline fraction and spherulitic structure of the polymer matrix in the investigated systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2350–2367, 2007     

Chemical Constituents of Ligusticum sinensis Oliv.

The new phenylpropanoid diglycoside ligusinenoside A ( 1 ), and the two new 8,4′‐oxyneolignan(‘8‐O‐4′‐neolignan’) diglycosides ligusinenosides B ( 2 ) and C ( 3 ), together with nine known compounds, were isolated from the rhizomes of Ligusticum sinensis Oliv. The structures of 1 – 3 were elucidated on the basis of spectroscopic analyses.     

光电倍增管脉冲性能研究

采用外腔式电光开光,调制主动照相探测光源,使光电倍增管处于脉冲工作状态下,以提高光电倍增管的输出幅度和动态范围,改善信号的信噪比,同时避免样品和探测器受长时间强激光照射.对滨松H6780光电倍增管进行了调试,使其线性输出电流由静态的0.1mA提升到脉冲状态的4.4mA,信噪比提高4.5倍.该技术对其他光敏探测有借鉴意义.     

Tracing Possible Structural Asymmetry of Silica Gel Used for Precoating Thin-Layer Chromatography Plates

JPC – Journal of Planar Chromatography – Modern TLC - We have previously described unexpected two-dimensionality in the thin-layer chromatographic separation of pairs of enantiomers of...     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.