Syntheses and Crystal Structures of Functionalized Tetramethyl Resorcinarenes

Tetramethyl resorcinarene, which was obtained by acidic condensation of resorcinol with paraacetoaldehyde, was chemically modified to the functionalized O-acyl, O-tosyl and O-acetate derivatives by corresponding acylation, p-toluenesulfonylation and alkylation reactions. The single crystal structures of these functionalized resorcinarenes and the complex of tetramethyl resorcinarene with 2,2'-bipyridine were determined by X-ray diffraction method. All these resorcinarenes adopt the all-cis configuration with four methyl groups stretching to the down rim and form 1D or 2D structures through H-bonds.     

反应烧结碳材料表面异质外延生长SiO2晶体的研究

利用高温反应烧结在不同结构碳材料表面热蒸发进行二氧化硅(SiO2)晶体的外延生长.采用X-射线衍射仪(XRD)、扫描电镜(SEM)和电子能谱仪(EDS)分析和研究了碳材料表面生成物的物相组成与显微形貌,探讨了SiO2晶体的外延生长机理.研究结果表明,不同结构碳材料表面能外延生长SiO2晶体,但形态不同.在碳纤维表面形成颗粒和短晶须状SiO2晶体,在石墨片上形成凸起团聚状SiO2晶体,而在金刚石表面首先形成了Si-O涂层,然后在Si-O涂层上生长棒状SiO2体.碳材料外延生长SiO2晶体是首先通过热蒸发法使Si沉积到碳材料表面,然后Si与体系中的O反应形成SiO2晶核,在不同结构碳材料表面生长SiO2晶体.     

Rapid Absolute Determination Platform of Nucleic Acid for Point-of-care Testing

Nowadays nucleic acid tests are promising to be considered as point-of-care testing(POCT). However, no such devices are currently available that can perform all the functions, including absolute nucleic acid determination, worldwide on-site detection, rapid analysis and real-time results reporting via ubiquitous mobile networks simultaneously with full package and automated means of measurement. In this study, we presented a compact low-cost portable POC automated testing platform with all attributes mentioned above. A disposable self-priming compartmentalization(SPC) microfluidic chip is used to conduct isothermal amplification. The platform also includes a micro-computer controlled heating unit, an inexpensive optical imaging setup, and a mobile device with customized software. It may become a useful tool for the rapid on-site detection of infectious diseases as well as other pathogens.     

钛钒铁间吸收增强效应研究及其校正

利用X射线荧光分析方法,采用电制冷Sic(PIN)探测器,对配制的Ti-V,Ti-Fe,V-Fe三种伪二元体系样品进行测量,得到了元素计数率归一系数(RK)与含最(WK)之间的关系曲线,对各组元素间的吸收-增强效应程度进行了定性分析.结果表明,Ti-V二元系中所表现的吸收增强效应较明显,Ti-Fe,V-Fe两种二元系中吸收增强现象不明显.同时,采用指数拟合的数学校正方法,对RK-WK关系曲线进行了拟合,从而获得元素X射线荧光计数率与含垦的函数方程.利用三组Ti-V二元系样品对此方法进行检验,与实际结果相比,对Ti,V元素的相对分析误差均在0.2%以内.     

中小口径双非球面数控抛光技术研究

针对口径Φ62 mm双凸非球面透镜,进行了数控研磨和抛光技术研究.提出了规范性的加工工艺流程,实现了中小口径双非球面元件的高效、快速抛光.根据计算机控制光学表面成型技术,采用全口径抛光和小抛头修抛的两步抛光法,在抛光中对其面形误差进行多次反馈补偿,使被加工零件表面的面形精度逐步收敛.最终两面的面形精度均小于0.5 μm,中心偏差小于0.01 mm,满足了光学系统中对非球面元件的精度要求,并且在保证有较高面形精度和较好表面光洁度的同时,解决了双非球面中心偏差和中心厚度难以控制的加工技术难题.     

Syntheses, Characterization and Crystal Structures of New Nickel Complexes with 2,6-Bis(imino)pyridyl Ligands

Introduction In the past decade, the imino-complexes based on late transition metal have received significantly increasing attention for their excellent performance in the olefin polymerization area since Brookhart et al.[1-8]     

TiO2介孔薄膜的制备及紫外光电响应性质

采用蒸发诱导自组装法制备了高度有序的TiO2介孔薄膜. 利用X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等分析手段对其进行了表征. 结果表明, 所得样品的孔径约为5 nm, 孔道规则, 且骨架为纯锐钛矿结构. 紫外-可见光谱(UV-Vis)的表征结果表明, 制备的TiO2介孔薄膜对波长小于380 nm的紫外线有很强的吸收. 对TiO2介孔薄膜的I-V(电流-电压)特性进行了表征, 发现加光后其I-V曲线由暗态时的肖特基特性转变为欧姆特性, 表明TiO2介孔薄膜对紫外光有很敏感的光电响应.     

表面等离子体子共振传感器用于研究不同材质包裹的磁性纳米粒子性质

利用自行设计组装的以白色发光二极管为光源的表面等离子体子共振传感器实验装置, 检测了不同材质包裹的磁性纳米粒子连接靶向DNA与生物素化DNA探针的结合程度. 结果表明, 与聚苯乙烯磁性微球连接的靶向DNA相比, Fe3O4@SiO2核壳式纳米微球连接的靶向DNA与生物素化的DNA探针结合速率较快, 且其相对标准偏差较小.     

PPESO3监测微波辅助酶解蛋白的进程

本实验将胰蛋白酶固定在荧光聚合物PPESO3上, 固定后的胰蛋白酶在酶解蛋白过程中通过监测荧光聚合物荧光强度的变化, 从而实现监测蛋白酶解过程.     

圆二色光谱法研究环境因素对细胞红蛋白二级结构的影响

采用远紫外圆二色光谱法系统地研究了细胞红蛋白(cytoglobin, Cygb)的浓度、环境温度、溶液的pH值和溶剂性质对细胞红蛋白二级结构的影响.结果表明: 当Cygb浓度<1 μmol/L时,它主要以α-螺旋形式存在,其α-螺旋含量>60%; 当Cygb浓度从0.3 μmol/L增大到2.0 μmol/L时,其α-螺旋含量迅速降低;当Cygb浓度>2.0 μmol/L时,其α-螺旋含量随浓度的增大变化很小(约30%).随着温度的升高,Cygb的α-螺旋含量逐渐减小,但既使温度达到368 K,它仍保持有20%的α-螺旋结构,说明该蛋白具有较高的热稳定性.在弱酸性和弱碱性溶液中,Cygb的二级结构都会有不同程度的破坏.在甲醇和乙醇中,Cygb的α-螺旋含量明显增加,这说明醇类可以诱导其α-螺旋的生成.