新型手性氨基醇的合成及其用于不对称催化醛类烷基化反应

制备了一种由糖类化合物衍生的新型手性氨基醇（Ⅰ），并将其作为手性源用于醛类的不对称烷基化反应．考察了在手性氨基醇的存在下，各种醛和二乙基锌作用生成相应的手性仲醇的光学收率及化学收率．结果表明，该催化剂对于芳香醛的烷基化更为有效．并考察了几种反应条件对于苯甲醛的不对称催化烷基化反应的影响，其中最佳结果为１－苯基－１－丙醇的光学收率达８２．７％，而化学收率达５８．８％．     

纳米核壳式铜-锡双金属粉的制备及性能研究

A kind of novel core-shell Cu-Sn bimetallic nanoparticles has been prepared by a new method (displacement method), in which Sn was made to cover on the surface of Cu nano-core. The preparation method and reaction mechanism have been discussed. This reaction happened under the existence of coordinate agent-(NH₂)₂CS and protective agent PVP. The nanoparticles prepared were with a core-shell structure, granule diameter between 50～100 nm and good dispersing capability. The Cu-Sn nanoparticles proposed has better oxidation-resistant ability than Cu nanoparticles with corresponding granule diameter and can be applied as lubricant additives as well as antibacterial agent. When the additive amount is very low (0.1wt‰～0.5wt‰), it can improve the P_B of the lubricant by 92%～106%, and also enhance its antiwear characteristics and friction-reducing properties. At the concentration of 1 000 ppm, it can reach an antibacterial ratio of 99.99%.     

X-射线衍射法测定尼龙1010结晶度

根据X-射线散射强度理论,使用图解多重峰方法对尼龙1010三个结晶峰及非晶峰的衍射强度进行校正,首次导出了尼龙1010结晶度计算公式,所得结果与密度及量热测定结果具有很好可比性。     

热处理过程中聚酯长丝的形态变化

在自制的红外三因素处理机上~[1],用红外加热在定张力下对聚对苯二甲酸乙二酯(PET)成品长丝进行热处理(二次定型)。用X-光衍射(WAXS)、X-光小角散射(DAXS)、红外光谱(IR)和双折射方法,测定样品的热收缩、结晶度、晶粒尺寸和取向、非晶取向、长周期和链折叠带强度。所得形态参数的变化表明,处理温度在200℃以上时,张力不再阻碍链折叠。不同定张力样品的形态研究表明,存在阻碍链折叠的某个张力转折值。本文条件下,这个张力值为f_(critical)=0.066g/dtex 。张力大于此值,链折叠过程受阻。     

Crystal Structure of Trans-2-Amino-3-Cyano-4-(3',4'-Methylenedioxyphenyl)-1-Phenyl-2-Cyclopentene-r-1-ol

1INTRODUCTIONIntheearlyseventiesthreegroupsofinvestigators('--"establishedthatlow--va-lenttitanium,preparedbythereactionofstrongreducingagentsontitaniumtrichlo-rideortitaniumtetrachlorideintetrahydrofuran,canabstractoxygenfromketonesoraldehydes,leadingtotheformationofolefins.Anincreasinginterestinthereac-tioninducedbylow--valenttitaniumreagentsisobservedandalargenumberoffunc-tionalgroupscanbereducedt4--6).However,thereactionoflow-valenttitaniumreagentwith4,4--dicyano--1,3--diaryl--l-butano…     

10-甲基吖啶苯酚酯衍生物的合成、表征及化学发光特性

吖啶-9-羧酸苯酚酯是一类效率较高的化学发光试剂.其结构一般有两部分组成,吖啶环发光部分和9-羧酸苯酚酯离去基团.本文对离去基团进行修饰,分别在离去基团苯酚部分的2,5或2,6位引入取代基CF₃、NO₂、Br、CH₃,合成了4个新吖啶酯衍生物,并对它们的分子结构进行了表征.4个新化合物和模型化合物(无取代基)比较,均表现出较好的化学发光效率;发光动力学基本符合文献报道规律.而且化学发光法对其水解稳定性考察显示,取代基的电性和位阻是影响稳定性的两大因素.     

短波近红外在体荧光分子成像技术最新进展

癌症的诊断迄今所依赖的主要是一些离体检测方法以及超声波、X射线透视、X射线CT、核磁共振成像和PET等影像学技术. 癌症的确诊则以肿瘤组织或病变细胞的形态和其它宏观特征为依据, 这往往是一个侵入性和耗时的过程, 不适于癌症的早期诊断. 这些影像学技术目前也大都难以发现分子水平上的问题. 因此, 迄今癌症的早期诊断仍然是医学界面临的一个空前挑战. 光学成像方法, 特别是荧光成像方法具有对人体无害、非侵入、高灵敏和可进行在体多目标成像的优点, 随着荧光指示物的不断拓展和检测方法的不断创新, 有望在分子和细胞水平上实现癌症的早期诊断. 本文重点介绍了几项有较重要价值及工作在短波近红外区域的在体荧光成像技术的新进展.     

Comparison Between the Effects of 2-Selenium Bridged β-Cyclodextrin and Ebselen on Treating SHRsp Stroke

A glutathione peroxidase（GPX） mimic, 2-selenium bridged β-cyclodextrin（2-SeCD）, was synthesized. In order to examine its role and mechanism in treating stroke we chose stroke-prone spontaneously hypertensive rats（SHRsp） as animal model. 56 SHRsps of 8-week olds were randomly divided into several groups： test groups （low, moderate, high dose of 2-SeCD） and control groups（positive and negative）. After onset of the stroke, the rats in test groups were orally administrated with different amounts of 2-SeCD, the positive control group with ebselen, and the negative control group with drinking water. The treatment lasted two weeks, followed by observation of the rats for 10 days, meanwhile blood pressure, biochemical parameters of plasma, and the contents of nitric oxide（NO） and malondialdehyde（MDA） in plasma and brain were determined. The results show that there were significant differences in contents of NO and MDA in plasma and brain between the test groups（high, moderate dose of 2-SeCD） and negative control group. The NO contents of the test groups were obviously higher than that of the negative control group （P〈0.01）. The MDA contents of the test groups（high, moderate dose of 2-SeCD） were obviously lower than that of the negative control group（P〈0.01）. The mechanism of 2-SeCD in treating stroke was discussed, which maybe related to the increase of NO and the decrease of MDA in plasma and brain tissue, but the exact mechanism should be further studied. Moreover, the tendencies of changes in systolic blood pressure, contents of NO and MDA, and other physiological parameters for the test groups were shown to be much better than the corresponding parameters for the positive group（the group with ebselen）（P〈0.05）, indicating that the treatment effect of 2-SeCD is better than that of ebselen.     

高质量氧化镓单晶及肖特基二极管的制备

本文采用导模法生长技术,成功制备了高质量掺Si氧化镓(β-Ga₂O₃)单晶,掺杂浓度为2×10¹⁸ cm^-3。晶体呈现淡蓝色,通过劳厄衍射、阴极荧光(CL)及拉曼测试对晶体的基本性质进行了表征,结果表明晶体质量良好。紫外透过光谱证明该晶体的禁带宽度约为4.71 eV。此外,在剥离衬底上,采用电子束蒸发、光刻和显影技术制备了垂直结构的肖特基二极管,平均击穿场强E_Ava为2.1 MV/cm,导通电阻3 mΩ·cm²,展示了优异性能。     

结构可靠性仿真方法研究

可靠性仿真是对复杂结构系统进行可靠性分析计算最为有效的方法,引起了研究者越来越广泛的关注. 综合目前结构可靠性仿真方法研究现状,介绍了蒙特卡罗（Monte-Carlo,MC）法、极限状态方程重构法、随机有限元法（stochastic finite element method,SFEM）进行结构可靠性仿真计算的特点及发展现状,归纳了固体火箭发动机（solid rocket motor,SRM）结构可靠性的特点及当前进行仿真的方法;并在此基础上分析了目前结构可靠性仿真方法及对SRM 结构可靠性进行仿真分析计算时存在的不足及需要进一步研究的内容.