Fabrication of size-tunable gold nanoparticles array with nanosphere lithography, reactive ion etching, and thermal annealing

Two-dimensional ordered arrays of gold (Au) nanoparticles were fabricated using two different variants of the nanosphere lithography technique. First, ordered arrays of polystyrene nanospheres on Si substrate were used as deposition masks through which gold films were deposited by electron beam evaporation. After the removal of the nanospheres, an array of triangular Au nanodisks was left on the Si substrate. After thermal annealing at increasing temperature, systematic shape transition of the nanostructures from original triangular Au nanodisks to rounded nanoparticles was observed. This approach allows us to systematically vary the size and morphology of the particles. In the second and novel technique, we made use of reactive ion etching to simultaneously reduce the dimension of the masking nanospheres and create arrays of nanopores on the substrate prior to the deposition of the Au films. These samples were subsequently annealed, which resulted in size-tunable and ordered Au nanoparticle arrays with the nanoparticles nested in the nanopores of the templated substrate. With the nanoparticles anchored in the nanopores, the substrate could be useful as a template for growth of other nanomaterials.     

Rate and Product Studies in the Solvolyses of Two Cyclic Phosphorochloridate Esters

Kinetic and product studies of the solvolyses of acyclic phosphorochloridates are extended to two cyclic diesters, 2-chloro-1,3,2-dioxaphospholane-2-oxide (1) and 2-chloro-5,5-dimethyl-1,3,2-dioxaphosphorinane-2-oxide (2). Slightly faster solvolyses are observed for 1 than for the acyclic dimethyl phosphorochloridate (3), and 2 solvolyzes somewhat slower than 3. An extended Grunwald–Winstein equation treatment shows similar sensitivities to changes in solvent nucleophilicity and solvent ionizing power for 1, 2, and 3, and a concerted S_N2 attack is proposed in each case. Product studies for the solvolyses of 2 in aqueous alcohols are presented.

     

Synthesis of 3-Alkylidenecepham-4-carboxylic Acid derivatives by Samarium(II) Iodide Reduction

Samarium(II) iodide promoted reductive deacetoxylation of 7-aminocephalosporanic acid derivatives to synthesize 3-alkylidenecepham-4-carboxylates, which could be valuable intermediates for the synthesis of new cephalosporin antibiotics, was investigated.     

Heterocyclic benzothiazole-based liquid crystals: synthesis and mesomorphic properties

Two homologous series of 2-(4-alkanoyloxybenzylidenamino)benzothiazoles and 2-(2-hydroxy-4-alkanoyloxybenzylidenamino)benzothiazoles were synthesised and characterised. Their molecular structures differed wherein the latter comprised a lateral hydroxyl group, unlike the former. Spectroscopic techniques such as FT-IR, ¹H & ¹³C NMR and mass spectrometry together with elemental analysis were employed to elucidate the molecular structures. The transition temperatures and their mesophases were determined by differential scanning calorimetry, optical polarising microscopy and X-ray diffraction techniques. Members with decanoyloxy till hexadecanoloxy chain in the series without the lateral hydroxyl group each exhibited a smectic A phase, while those in the series with the lateral hydroxyl group were non-mesogenic. The mesomorphic properties of the present series were compared with other structurally related series to establish the chemical structure–mesomorphic properties relationship.     

Synthesis of new schiff base ester liquid crystals with a benzothiazole core

A series of new calamitic liquid crystals, 6-methoxy-2-(4-alkanoyloxybenzylidenamino)benzothiazoles, comprising a benzothiazole core, terminal methoxy group and a Schiff base linkage were synthesised and characterised. This series comprises 12 members wherein members differ by the length of the alkanoyloxy chain (C _n-1H_2n-1COO-, where n?=?2–8, 10, 12, 14, 16, 18). Their mesomorphic properties were studied by using differential scanning calorimetry, optical polarising microscopy and powder X-ray diffraction techniques. The short chain derivatives (n?=?2 and 3) were non-mesogenic compounds, while an enantiotropic nematic phase was present throughout the remaining members of the series. The smectic C phase emerged from the decanoyloxy derivative onwards.     

Poly(Pyridinium Salt)s Containing 2,7-Diamino-9,9′-Dioctylfluorene Moieties with Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline and Light-Emitting Properties

A series of poly(pyridinium salt)s-fluorene main-chain ionic polymers with various organic counterions were synthesized by using ring-transmutation polymerization and metathesis reactions. Their chemical structures were characterized by Fourier Transform Infrared (FTIR), proton (¹H), and fluorine 19 (¹⁹F) nuclear magnetic resonance (NMR) spectrometers. These polymers showed a number-average molecular weight (M_ns) between 96.5 and 107.8 kg/mol and polydispersity index (PDI) in the range of 1.12–1.88. They exhibited fully-grown lyotropic phases in polar protic and aprotic solvents at different critical concentrations. Small-angle X-ray scattering for one polymer example indicates lyotropic structure formation for 60–80% solvent fraction. A lyotropic smectic phase contains 10 nm polymer platelets connected by tie molecules. The structure also incorporates a square packing motif within platelets. Thermal properties of polymers were affected by the size of counterions as determined by differential scanning calorimetry and thermogravimetric analysis measurements. Their ultraviolet-visible (UV-Vis) absorption spectra in different organic solvents were essentially identical, indicating that the closely spaced π-π* transitions occurred in their conjugated polymer structures. In contrast, the emission spectra of polymers exhibited a positive solvatochromism on changing the polarity of solvents. They emitted green lights in both polar and nonpolar organic solvents and showed blue light in the film-states, but their λ_em peaks were dependent on the size of the counterions. They formed aggregates in polar aprotic and protic solvents with the addition of water (v/v, 0–90%), and their λ_em peaks were blue shifted.     

Stabilization of continuum generation from normally dispersive nonlinear optical fibers for a tunable broad bandwidth source for optical coherence tomography

Continuum generation from normally dispersive ultrahigh-numerical-aperture fibers deteriorates in relatively short times, limiting its application as a practical optical source for high-resolution optical coherence tomography. We find that reversible light-induced structural modification of fiber optic materials, rather than permanent optical damage, is responsible for this deterioration. By examining how the optical properties of corresponding light-induced waveguides depend on pumping wavelength, we isolate a waveguide that is beneficial for stable continuum generation. The performance deterioration due to the formation of other waveguides can be reversed by overwriting them with this particular waveguide.     

Solvent and pH Effects on the Fluorescence of 7-(Dimethylamino)-2-Fluorenesulfonate

A novel water-soluble solvatochromic molecule, 7-(dimethylamino)-2-fluorenesulfonate (2,7-DAFS), was prepared by a three-step reaction from 2-nitrofluorene in good overall yield. The pH and solvent effects on the UV-VIS absorption and fluorescence spectra of 2,7-DAFS have been studied. Protonation of the dimethylamino group switches the absorption from intramolecular charge-transfer (ICT) to π → π* transition. The ground state pKa value of 2,7-DAFS was determined as 4.51. The fluorescence spectrum of the excited basic form, *(DAFS), shows a structureless single band with a large Stokes shift, whereas that of the acidic form, *(⁺HDAFS), exhibits a structured band with a small Stokes shift. The emission intensities of the basic and acidic forms versus pH/Ho plots show stretched sigmoidal curves and indicate that (1) the rate of deprotonation of *(⁺HDAFS) is comparable to the fluorescence decay of the species, and (2) the efficient proton-induced quenching of *(DAFS) fluorescence occurs. The pKa* was estimated as −1.7 from the fluorescence titration curve. The fluorescence maximum of *(DAFS) is blue-shifted as the polarity of solvent decreases. However, no clear dependency of the emission intensity and spectral half width, and thus fluorescence quantum yield, on the solvent polarity was revealed. It appears that the fluorescence sensitivity of 2,7-DAFS is 15 ∼ 25 times greater than the sensitivity of a widely utilized fluorescent probe, 5-(dimethylamino)-1-naphthalenesulfonate. This higher sensitivity, together with the ease of derivatization, would provide the fluorene-based fluorescent molecules significant advantages for a variety of applications.     

ZIF-Induced d-Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d-band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat⁻¹ h⁻¹ under ambient conditions. The strategy lowers electrocatalyst d-band position to weaken H adsorption and concurrently creates electron-deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44-fold compared to without ZIF (ca. 1 %). The Pt/Au-N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Tritium and stable isotope content variation in precipitation at Hongseung: West Korea Region

Journal of Radioanalytical and Nuclear Chemistry - Tritium and stable isotopes contents in precipitation were analyzed on a monthly base at Hongseung which was located middle west of Korea...