BINOL双酰胺绿色催化吲哚与硝基烯烃的 Friedel-Crafts烷基化反应

合成了3种BINOL双酰胺(Ⅰ~Ⅲ)，其结构经¹H NMR, ¹³C NMR, HR-MS(ESI)和元素分析确证。研究了I~III对取代吲哚和硝基烯烃的Friedel-Crafts烷基化反应的催化性能，并对反应条件进行了优化。结果表明：在最优条件(CH₂Cl₂为溶剂，Ⅰ为催化剂，于40 ℃反应12 h)下，吲哚及取代吲哚与硝基烯烃均能有效的进行Friedel-Crafts烷基化反应，收率和ee值最高可达88%和90%。     

Crystal Structure,Electrochemical Properties and Third-order Nonlinear Optical Response of 4-Methyloxy benzaldehyde Thiosemicarbazone and Its Copper(Ⅱ)Complex

Thecurrentsurgeofinterestinthefield0fnon-linearoptics(NL0)isderivedbothfromaquestforafundamentalunderstanding0fthenon-linearprocess,anditSimPortanceinthetechn0logyofphotonics.Amongnon-linearphen0mena,thethird-ordernon-linearophcsoccuPyanimPortantp0sihonbecauseitprovidesthemechanicsforophcalswitching,ophcallogic,andreal-hmeholograPhy"'.0rganicmaterialwithextendednconjugahonsandlargeRdelocalizahonsarewellknownastheimPortantmaterialsofachievinglargethird-ordernonlinearihes3.ForexamPle,thiosen…     

Determination of terazosin by cloud point extraction-fluorimetric combined methodology

A new sensitive and selective preconcentration-fluorimetric method for determination of terazosin based on its native fluorescence was developed. The analyte, initially present in aqueous matrix, was treated with an extractive non-ionic surfactant solution and separated by the clouding phenomenon. The optimum analytical conditions for terazosin assay were established. Under these conditions, linear calibration curves were obtained over the range of 1 × 10⁻⁵ to 7.0 μg mL⁻¹ with detection and quantification limits of 1.11 × 10⁻⁵ and 3.7 × 10⁻⁵ μg mL⁻¹, respectively. Additionally, the binding constant (K_B) for the terazosin-PONPE 7.5 system was determined given a value of 1028 L mol⁻¹. The developed coupled methodology, which thoroughly satisfies the typical requirements for pharmaceutical control processes, was proved to be appropriate for monitoring terazosin in actual pharmaceutical formulations and biological fluid sample. The results were validated by recovery test and by comparison with other reported methods, being highly satisfactory.     

芳香PET树脂母粒的研制

通过丙烯酸和丙烯酸正丁酯溶液共聚合，得到丙烯酸－丙烯酸正丁酯共聚物，该树脂与环氧氯丙烷反应后再与PET树脂切片继续反应，可使PET树脂切片表面形成聚丙烯酸酯自膨润型吸油网络结构，将表面具有聚丙烯酸酯自身膨润型吸油网络结构的PET树脂切片（简称为留香剂）在油溶性香精中浸泡，香精就被吸附在留香剂表面，即得到芳香PET树脂母粒。用SEM观察了母粒的表面结构形态。     

Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

PBA@POM Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

To realize the effective conversion of renewable energy through water decomposition, efficient electrocatalysts for the oxygen evolution reaction (OER) are essential. In this article, PBA@POM was successfully prepared with a Prussian blue analogue (PBA) as the initial structure. A facile hydrothermal process is reported for obtaining PBA@POM by etching the cubic PBA with a strong Brønsted acid, H₃PMo₁₂O₄₀ (HPMo). The hollow cube structure not only exposes more active sites but also promotes electron transport, which results in excellent electrocatalytic activity for the OER. Compared with the PBA, which initially simply adhered to POM, the optimum PBA@POM hybrids display remarkably enhanced OER catalytic activity, with an almost constant overpotential of 440 mV at a current density of 10 mA cm^?2 and a small Tafel slope (23.45 mV dec^?1). The facilely prepared PBA@POM with good electrochemical activity and stability promises great potential for the OER.     

Non-newtonian viscosity of polypeptides in the helix–coil transition region

The non-Newtonian intrinsic viscosities [η] of poly(γ-methyl L-glutamate) were measured in the helix–coil transition region under various conditions in this work. The helix content f_H, which represents the degree of conformational transition, was obtained by using a polarimeter. Our experimental results show that the non-Newtonian behavior of the polypeptide is markedly affected by its conformation; i.e., the non-Newtonian effect becomes larger as f_H increases. The effect of external pressure ΔP on [η] was studied carefully; [η] increases with f_H when ΔP < 1.5 psi, but it decreases when ΔP > 1.5 psi and f_H > 0.8. The reason for this result is considered in the text.     

聚氨酯分子印章的制备和表征

“软平板印刷”微结构制备技术为微米和亚微米器件的制备提供了一条新的途径 [1] ,已被电子学家和材料学家所应用 ,近年来进入了生物学领域[2 ] .本实验室将这一方法与生物分子电子学相结合 ,提出了用于 DNA芯片在片合成的分子印章法 [3,4 ] .分子印章法的实质是接触压印与组合化学相结合的固相界面反应 .聚二甲氧基硅氧烷 ( PDMS)是一种软印刷的优良材料 [5] ,但是由于其疏水性和较差的机械性能 ,必须对其进行改性才能用来制备 DNA分子印章 [6 ] .　　聚氨酯作为一种功能材料 ,由于分子中交替的软、硬链段及其不同的热动力学性能而形成…     

热致液晶共聚酯／Nylon－1010共混物的研究

利用偏光显微镜（ＰＬＭ），差示扫描量热计及广角Ｘ－射线衍射等手段研究了热致液晶共聚酯／Ｎｙｌｏｎ－１０１０共混体系．发现当热致液晶共聚酯（ＨＴＨ１０）含量达到３０％时共混物微结构与纯ＨＴＨ１０相似．尼龙－１０１０的结晶度先是随ＨＴＨ１０含量增加而增加，随后又随之下降，但其结晶温度却随ＨＴＨ１０加入而单调下降，共混物的熔融热焓△Ｈｍ在ＨＴＨ１０含量为３０％时与计算值有较大的偏差，广角Ｘ－射线衍射结果表明，此时共混物结构发生了较为明显的变化，两组份之间在此时存在一定的相互作用．     

APPLICATION OF THE MOMENT METHODS TO ANALYSIS OF X-RAY DIFFRACTION LINE PROFILE FOR PA1010-BMI SYSTEM

Pure X-ray diffraction profiles have been analysed for polyamide 1010 and PA1010--BMI system by means of multipeak fitting resolution of X-ray diffraction.The methods ofvariance and fourth moment have been applied to determine the particle size and strainvalues for theparacrystalline materials.The results indicated that both variance and fourthmoment of X-ray diffraction line profile yielded approximately the same values of theparticle size and the strain.The particle sizes of(100)reflection have been found todecrease with increasing BMI content,whereas the strain values increased.